6.8 Carnot Engine and Carnot's Theorem
Heat and Thermodynamics
Sadi Carnot in 1824 described an ideal engine using only isothermal and adiabatic processes. He showed that a heat engine operating in an ideal reversible cycle between two heat reservoirs at different temperatures, would be the most efficient engine. A Carnot cycle using an ideal gas as the working substance is shown on PV diagram (Fig. 6.9). It consists of following four steps:
- The gas is allowed to expand isothermally at temperature T₁ absorbing heat Q₁ from the hot reservoir. The process is represented by the curve AB.
- The gas is then allowed to expand adiabatically until its temperature drops to T₂. The process is represented by the curve BC.
- The gas at this stage is compressed isothermally at temperature T₂ rejecting heat Q₂ to the cold reservoir. The process is represented by the curve CD.
- Finally the gas is compressed adiabatically to restore its initial state at temperature T₁. The process is represented by the curve DA.
Thermal and mechanical equilibrium is maintained all the time so that each process is perfectly reversible. As the working substance returns to the initial state, there is no change in its internal energy i.e., ΔU = 0.
The net work done during one cycle equals to the area enclosed by the path ABCDA of the PV diagram. It can also be estimated from net heat ΔQ absorbed in one cycle.