33.6 Wastewater Treatment
Water
Depending on the type and severity of pollution, such as organic matter, chemicals, or pathogens, different water treatment methods are used. These techniques are used at different levels of water treatment, i.e., primary treatment (removal of physical debris), secondary treatment (biological processing), and tertiary treatment (chemical purification). In the following steps different technologies (physical, biological, and chemical) suitable to remove various contaminants in water are being provided
I. Screening and Sedimentation
The initial stage of water treatment typically involves screening and sedimentation. Large insoluble particles are removed by passing water through metal screens. This is followed by sedimentation, where water is held in large tanks to allow suspended solids to settle at the bottom under the influence of gravity.
ii. Coagulation and Flocculation
To speed up the settling of finer colloidal particles, coagulation and flocculation are employed. This process is done if required. It involves the precipitation of dissolved contaminants (e.g., heavy metals, phosphates) into insoluble forms for removal. Chemical coagulants, such as aluminium sulphate (Al₂(SO₄)₃), are added to the water. These chemicals cause the smaller particles to clump together into larger masses called “floc”, which are then easily removed.