15.2.1 Distillation Process
Basic Separation Techniques
1. Simple distillation
It is used to separate solvent from solution. For example, take 100 cm³ sea water. Set up the apparatus as shown in the Figure 15.5. Add a few pieces of boiling chips to prevent bumping of the liquid in the flask. Make whole apparatus air tight to prevent vapors to escape.
Heat the flask gently with the help of a Bunsen burner. Turn on the tap to allow cold water to circulate slowly around the condenser. Water or alcohol will evaporate as its boiling point is reached, and its vapours will pass through the condenser. The water circulating around the condenser will condense these vapours back into the liquid form. This is called distillate and it will be collected in the receiving flask. The components left behind in the distillation flask are collectively called the residue.
2. Fractional distillation
Separating the two miscible liquids in this way is called fractional distillation. The process of fractional distillation will be successful only if the difference in the boiling points of the two liquids being separated, is around 25°C. The distillation column is a glass equipment used in the distillation of mixture of liquids to separate it into its components depending upon their boiling points. The distillation column is filled with glass beads to increase the surface area available for condensing the vapor as shown in