17.14 Rectification
Alternating Current
Rectification is the process of converting alternating current into direct current.
Diodes allow current to flow in one direction (forward bias) but block it in the opposite direction (reverse bias). Rectification is of two types, half wave rectification and full wave rectification. Rectification is commonly used in electronic devices that require a stable DC power source, such as computers and smartphones, as most household and commercial power is AC.
Diode as a Rectifier
A diode allows large current to flow when forward biased. However, the current through a reverse biased diode is practically zero. It is due to this important property of the diode that it can be used for rectification i.e., to convert alternating current into unidirectional current or direct current.
Half-Wave Rectifier
In a half-wave rectification, an AC signal is converted into pulsating direct current DC by passing one half-cycle of waveform and blocking the other half. In Fig.17.13, alternating voltage of period T called input voltage is supplied to a diode D which is connected in series with a load resistance R_L. The working of half-wave rectifier is based on the fact that the diode allows the current flow only in one direction. Thus, it converts the AC signal into DC signal. Figure 17.13 shows the circuit of half-wave rectification and it is working showing graphically its input and output wave forms.