3.6 Law of Conservation of Angular Momentum
Circular and Rotational Motion
Circular and Rotational Motion
The law of conservation of angular momentum is one of the fundamental principles of Physics. It has been verified from the cosmological to the sub microscopic level. The effect of the law of conservation of angular momentum is readily apparent if a single isolated spinning body alters its moment of inertia.
If a body of moment of inertia I₁, spinning with angular speed ω₁ alters its moment of inertia to I₂, then its angular speed ω₂ also changes so that its angular momentum remains constant.
The angular momentum is a vector quantity with direction along the axis of rotation. Hence, the direction of angular momentum along the axis of rotation also remains fixed. This is illustrated by the fact given below:
This fact is of great importance for the Earth as it moves around the Sun. No other sizeable torque is experienced by the Earth, because the major force acting on it is the pull of the Sun. The Earth's axis of rotation, therefore, remains fixed in one direction with reference to the universe around us.
The book prints this figure as a photo-sequence; it is redrawn here as a sketch.
A diver jumping from a springboard has to take a few somersaults in air before touching the water surface, as shown in Fig.3.18. After leaving the springboard, he curls his body by rolling arms and legs in. Due to this, his moment of inertia decreases, and he spins in midair with a large angular velocity. When he is about to touch the water surface, he stretches out his arms and legs. He enters the water at a gentle speed and gets a smooth dive. This is an example of the law of conservation of angular momentum.
An ice skater as shown in Fig.3.19 can increase his angular velocity by folding arms and bringing the stretched leg close to the other leg. By doing so, he decreases his moment of inertia. As a result, angular speed increases. When he stretches his hands and a leg outward, the moment of inertia increases and hence angular velocity decreases.
A person is standing on a turntable with heavy mass (dumb-bell) in his hands stretched out on both sides as shown in Fig. 3.20. As he draws his hands inward, his angular speed at once increases. This is because the moment of inertia decreases on drawing the hands inwards, which increases the angular speed.
The book prints this figure as two photographs; it is redrawn here as a sketch.
Flywheel is a mechanical device which consists of a heavy wheel with an axle (Fig. 3.21). It is used to store rotational energy, smooth out output fluctuations and provides stability in a wide range of applications such as bicycles and other vehicles, industrial machinery, gyroscopes, ships and spacecrafts.
The book prints this figure as a photograph; it is redrawn here as a sketch.
When a fly wheel spins, its angular momentum resists changes to its orientations, maintaining stability. This is useful in systems that need precise control over their orientation without external interference.
A gyroscope is a device which is used to maintain its orientation relative to the Earth's axis or resists changes in its orientation. It consists of a mounted flywheel pivoted in supporting rings as shown in Fig. 3.22. It works on the basis of law of conservation of angular momentum due to its large moment of inertia. When the gyroscope spins at a large angular speed, it gains large angular momentum. It is then difficult to change the orientation of the gyroscope's rotational axis due to its large moment of inertia. A change in orientation requires a change in its angular momentum. To change the direction of a large angular momentum, a corresponding large torque is required. Even if gyroscope is tilted (Fig. 3.23), it still keeps levitated without falling. Hence, it is a reason why a gyroscope can be used to maintain orientation. The main applications of gyroscope are in the guiding system of aeroplanes, submarines and space vehicles in order to maintain a specific direction in space to keep steady course.