15.4 How to Check the Purity of the Product?
Basic Separation Techniques
Separate methods are applied to purify compounds if they exist in liquid or solid states under normal conditions. Liquids are generally purified by distilling them at normal pressure or under vacuum. Purity of liquids can be checked by comparing their boiling points with those mentioned in the literature.
Aspirin is prepared by reacting salicylic acid with an excess of acetic anhydride in the presence of a few drops of concentrated H₂SO₄. Aspirin is a very important analgesic and antipyretic.
After the reaction is over, water is added in the reaction mixture to precipitate out aspirin. The mixture is then filtered to get aspirin as a crude product. It is then crystallized in water as polar solvent.
- i.Aspirin obtained in the above process may be mixed with the unreacted starting material, salicylic acid. To check whether the product is pure or impure, its melting point is determined. If the product melts sharply, in this case at exactly 136°C then the product is considered as pure. If the product shows a melting point which is not sharp rather it melts within a range of temperature, it is considered as an impure product.
- ii.Another way of assessing the purity of the product is to get the mixed melting point. In such a case the product is mixed with a pure sample of aspirin and the melting point is then determined. If it still shows a sharp melting point then it is a pure product.