17.7 Choke
Alternating Current
A choke is often modeled as a series RL-circuit, consisting of a resistor R, having very small value of resistance, in series with an inductor L, of quite large inductance X_L = 2πf L, as shown in Fig.17.7(e). The inductance L of the choke coil is also very high due to the high permeability of iron core on which choke coil is wound. As the resistance R of a choke coil is negligibly small, therefore, the power factor (cosθ) of the choke coil is almost zero. Thus, the phase difference θ between the current and voltage for a choke coil is nearly equal to 90°. So practically, no power is dissipated as heat by a choke coil. Also choke is used to block high frequency AC while allowing DC and low frequency AC to pass. Choke coils are used to filter out high frequency AC noise from electronic circuits, ensuring a cleaner DC output. They are essential in switch-mode power supplies, helping to regulate voltage and filter out switching noise.