5.4 Determination of Young's Modulus of a Wire
Solids and Fluid Dynamics
Experimentally, the magnitude of Young's modulus for a material in the form of wire can be found out mostly with help of searl apparatus as shown in Fig. 5.4.
It consists of two wires, auxiliary or reference wire and test wire (experimental wire) of equal lengths of same material having same diameters attached to a rigid support. Both wires are connected to horizontal bars (frames F₁ and F₂) at the other ends. Hang a constant weight to the hook of horizontal bar of reference wire and hanger on test wire so that wire remains stretched and free from kinks.
Procedure
The following procedure is adopted for finding Young's modulus of a wire experimentally.
- Measure the initial length ‘L₀’ of the wire using a metre scale.
- Measure the diameter ‘d’ of the wire using a screw guage. The diameter should be measured at several different points along the wire and take average.
- Adjust the spirit level so that it is in horizontal position by turning the micrometer. Record the micrometer reading to use it as the reference reading.