1.11 Applications of Exponential and Logarithmic Functions in Real-Life Situations
Graphical Representation of Functions
Although there are many real-life situations involving exponential and logarithmic functions, in this section we focus on selected applications such as growth and decay processes, the measurement of sound intensity in decibels, and compound interest. Exponential models are used to describe quantities that change over time, while logarithmic functions help in determining unknown quantities in such models. The formula for growth and decay will be used as a given model and will be derived later in the chapter on differential equations, while the formulas for sound intensity and compound interest will be taken as standard results and will not be derived here.
log(10x)=x
ln(at)=tlna
Use
ln
when the base is
e
, and
log
(base 10) when the base is 10.
(i) Growth and Decay
Many natural and physical processes such as population growth and radioactive decay change in such a way that the rate of change is proportional to the current amount. These processes are known as exponential growth or decay.
The general mathematical model is:
N=N0ekt
swipeN equals N nought times e to the power k t
Where N0 is the initial amount, N is the amount at time t, and k is a constant which is positive for growth and negative for decay.
In growth, the quantity increases with time, while in decay it decreases with time. Logarithms are used to determine unknown quantities such as time or rate in these models.
Worked example
Example 22
A population is given by: N=200e0.04t. Find the time t when the population becomes 400, where t is measured in hours. (Growth)
Given: N=200e0.04t and N=400.
To find: the time t (in hours).
Method: t is in the exponent, so substitute N=400, make e0.04t stand alone, then take the natural logarithm, because the base is e.
Substitute N = 400400=200e0.04tWhy: the model is true at every moment, including the moment the population is 400.
Make the exponential stand alone200400=e0.04t2=e0.04t
Take natural logarithm on both sidesln2=ln(e0.04t)ln2=0.04tWhy: ln and e
Solve for tt=0.04ln2=0.040.6931
Check:200e0.04×17.33=200e0.6932≈200×2.000=400
Answer: Hence the population becomes 400 in about 17.33 hours.
Worked example
Example 23
A radioactive substance decays according to: N=500ekt. After 20 hours, the amount becomes 300. Find the value of k, where t is in hours. (Decay)
Given: N=500ekt; N=300 when t=20.
To find: the constant k.
Method: k is in the exponent. Substitute both known values, make e20k stand alone, then take ln.
Substitute t=20 and N=300300=500e20kWhy: the pair t=20
Make the exponential stand alone500300=e20k53=e20k
Take natural logarithm on both sidesln(53)=20kWhy: ln(e20k)=20k
Solve for kk=201ln(53)
The book's rounded value
The book prints k≈−0.0256. Rounded to four decimal places, −0.025541 is −0.0255, because the fifth decimal digit is 4 (see the Book correction below).
Why: when the next digit is less than 5 we round down.
The intensity of sound is the amount of sound energy passing through a unit area per unit time. Since sound intensity varies over a very wide range, it is measured on a logarithmic scale called the decibel (dB) scale.
The sound level L is given by:
L=10log(I0I)
swipeL equals 10 times log of I over I nought
where I is the intensity of sound and I0 is the threshold of hearing, which is the minimum sound intensity that a normal human ear can detect. Its standard value is given by:
I0=10−12W/m2
swipeI nought equals 10 to the power minus 12 watts per square metre
where, W/m2 (watts per square meter) is the unit of sound intensity. It represents the amount of sound power (energy per second) passing through a unit area.
Because of the logarithmic scale, even a small increase in decibels represents a large change in actual sound intensity, which makes logarithmic laws very useful in comparing sound levels in real-life situations.
Worked example
Example 24
A sound has intensity I=10−4 and reference intensity I0=10−12. Find the sound level. (Finding sound level)
Given: I=10−4, I0=10−12
Answer: L=80 dB
Worked example
Example 25
A sound has level L=60 dB and I0=10−12. Find the intensity I.
Given: L=60 dB, I0=10−12W/m2
Answer: I=10−6W/m2
Worked example
Example 26
The sound levels at two points are L1=90 dB and L2=60 dB. Find the ratio of their intensities I2I1, where I0=10−12W/m2.
Given: L1=90 dB, L2=60 dB, I0=10−12W/m2
Answer: I2I1=103=1000
(iii) Compound Interest
Compound interest is a method of calculating interest in which the interest earned in each period is added to the principal (initial amount), so that interest is earned on both the principal and the accumulated interest. This results in exponential growth of money over time and is widely used in banking and financial systems to model investment growth. Compound interest is generally classified into two types: discrete compounding and continuous compounding.
Discrete Compound Interest
Discrete compound interest is a method of calculating interest in which the interest is added to the principal at fixed time intervals such as yearly, half-yearly, quarterly, or monthly. In this method, interest is not added continuously, but only at specific intervals, and the future amount is calculated using a fixed compounding frequency. This type of compounding leads to exponential growth of money over time and is commonly used in banking systems.
The discrete compound interest is given by the formula:
A=P(1+nr)nt
swipeA equals P times open bracket 1 plus r over n close bracket to the power n t
where, A = Final amount
P = Principal (initial amount)
r = Interest rate per unit time (in decimal form)
n = Number of times interest is compounded per unit time
t = Time (measured in the same unit as the compounding period)
Continuous Compound Interest
Continuous compound interest is a method of calculating interest in which the interest is assumed to be added to the principal continuously at every instant of time. In this case, the compounding occurs without any fixed intervals, and the amount increases smoothly over time. This type of compounding represents the limiting case of discrete compounding when the number of compounding periods becomes infinitely large.
The formula for continuous compounding is:
A=Pert
swipeA equals P times e to the power r t
where, A = Final amount after time t (principal + interest)
P = Principal (initial amount invested or borrowed)
r = Rate of interest per unit time (in decimal form)
t = Time (measured in the same unit as the rate is based on, such as years or months)
Teaching table (ours): Rs. 1000 at 5% per year for 3 years
Compounding
n
Amount (Rs.)
Annually
1
1157.63
Half-yearly
2
1159.69
Quarterly
4
1160.75
Monthly
12
1161.47
Daily
365
1161.82
Continuously
n→∞
1161.83
swipe
Worked example
Example 27
A sum of Rs. 1000 is invested at a rate of 5% per year compounded continuously for 3 years. Find the final amount.
Given: P=1000, r=5%=0.05, t=3.
To find: the final amount A.
Method: the money is compounded continuously, so use A=Pert.
Formula for the continuous compound interestA=PertWhy: 'compounded continuously' is the signal for this formula.
Substituting the valuesA=1000e0.05×3A=1000e0.15Why: rt=0.05×3=0.15
Evaluatee0.15≈1.1618A≈1000×1.1618=1161.8Why: the calculator gives
Check:
Compounded annually the amount would be 1000(1.05)3=1157.63. Continuous compounding gives a little more, as it should (see the table above).
Answer: Hence, the final amount after 3 years is A≈ Rs. 1161.8.
Worked example
Example 28
A sum of Rs. 5000 is invested at a rate of 8% per annum, compounded quarterly. Find the amount after 3 years.
Given: P=5000, r=0.08 (8% per annum), quarterly compounding n=4, t=3 years.
To find: the amount A after 3 years.
Method: interest is added at fixed intervals (every quarter), so use the discrete formula A=P(1+nr)nt.
Formula for the discrete compound interestA=P(1+nr)ntWhy: 'compounded quarterly' means four fixed additions per year.
Substituting the valuesA=5000(1+40.08)4×3A=(5000)(1.02)12
Evaluate(1.02)12≈1.268242A≈5000×1.268242≈6341.2
Check:
Compounded annually the amount would be 5000(1.08)3=6298.56. Quarterly compounding gives a little more, as expected.
Answer: Hence, the amount after 3 years is A≈ Rs. 6341.2.
Why: dividing both sides by 200 leaves only
e0.04t
on the right. We may not take
ln
while 200 still multiplies it, because
ln(200e0.04t)
is not
0.04t
.
undo each other,
ln(ex)=x
. This brings
t
down from the exponent.
≈17.33
Why: divide both sides by 0.04. The calculator gives
ln2≈0.6931
.
The population is 400, as required.
,
N=300
must satisfy the model.
Why: divide both sides by 500 and reduce the fraction.
.
=20−0.51083
≈−0.02554
Why: divide by 20.
ln53
is negative because
53<1
, so
k
comes out negative.
The amount is 300 after 20 hours, and
k<0
fits a decay.
)
(both in
W/m2
).
To find: the sound level
L
in dB.
Method: substitute directly into
L=10log(I0I)
. The law of exponents
10b10a=10a−b
simplifies the ratio, and
log(10x)=x
finishes it.
Substitute the values
The book prints: Substituting, I=10−4 and I=10−12. The second value is I0, the reference intensity (see the Book correction below).L=10log(10−1210−4)Why: I goes on top and I0 underneath.
Simplify the ratio10−1210−4=10−4−(−12)=108L=10log(108)Why: when dividing powers of the same base we subtract the exponents, and −4+12=8.
Take the logarithmL=10×8=80dBWhy: log(108)=8, because log has base 10.
Check:1080/10=108=I0I80 dB means the sound is 108 times the threshold, which matches 10−4÷10−12.
.
To find: the intensity
I
.
Method: now the unknown is inside the logarithm. Substitute, divide by 10, then change the logarithmic form to exponential form.
Substitute into the formula60=10log(10−12I)Why: L=10log(I0I) with the known values put in.
Divide both sides by 106=log(10−12I)Why: the logarithm must stand alone before we change the form.
Convert to exponential form106=10−12IWhy: logx=y means x=10y (base 10).
Solve for II=106×10−12=10−6W/m2Why: multiply both sides by 10−12; when multiplying powers we add the exponents: 6+(−12)=−6.
Check:10log(10−1210−6)=10log(106)=60dB
.
To find: the ratio
I2I1
.
Method: write the decibel formula for each sound, change both to exponential form, then divide;
I0
cancels.
Formula for the first sound90=10log(I0I1)9=log(I0I1)Why: substitute and divide by 10.
Formula for the second sound60=10log(I0I2)6=log(I0I2)Why: the same steps for the second level.
Converting in exponential formI0I1=109I0I2=106Why: logx=y means x=10y.
Divide the two equationsI2I1=106109=103=1000Why: I2/I0I1/I0=I2I1, so I0 cancels. We subtract exponents: 9−6=3.
Check:
The levels differ by 30 dB, that is three steps of 10 dB, and each step multiplies the intensity by 10: 10×10×10=1000.
, the required ratio of the intensities: the first sound is 1000 times as intense as the second.
; the rate is used as a decimal.
e0.15=1.16183…
Why: the rate per quarter is
40.08=0.02
, and 3 years have
4×3=12
quarters.
Why: use the power key of the calculator; round only at the end.