8.16.2 Preparation of Sulphur Trioxide
Chemical Equilibrium
To manufacture H₂SO₄, sulphur trioxide gas is produced from SO₂ and O₂, in a reversible process.
Chemical Equilibrium
To manufacture H₂SO₄, sulphur trioxide gas is produced from SO₂ and O₂, in a reversible process.
According to Le-Chatelier’s principle, a high pressure and low temperature are the essential conditions to have better yield of SO₃. At low temperature, the equilibrium constant for the formation of SO₃ is large, but equilibrium is achieved very slowly. As the temperature is raised, the rate increases but the yield of SO₃ drops off.
The following Table 8.2 helps us to understand the parameters, when pressure is maintained at 1 atmosphere.
| 1. Temperature (°C) | 200 | 300 | 400 | 500 | 600 | 700 |
|---|---|---|---|---|---|---|
2. Kc | 5500 | 690 | 160 | 55 | 25 | 13 |
3. Mole % of SO₃ | 98 | 91 | 75 | 61 | 46 | 31 |
In order to have a best yield of SO₃, within a reasonable time, a mixture of SO₂(g) and O₂(g) (air) at one atmospheric pressure is passed over a solid catalyst, such as V₂O₅, But due to the exothermic reaction, the temperature of the gas increases to 600 °C. The equilibrium mixture is recycled at low temperature of 400-500 °C to increase the yield of SO₃(g).
Look at the information given in the table below:
| T/K | N₂(g) + 3H₂(g) ⇌ 2NH₃(g), ΔH° = −92 kJ mol⁻¹, Kp = (pNH₃)² / pN₂(pH₂)³: Kp/atm⁻² | T/K | N₂O₄(g) ⇌ 2NO₂(g), ΔH° = +57 kJ mol⁻¹, Kp = (pNO₂)² / pN₂O₄: Kp/atm | T/K | 2SO₂(g) + O₂(g) ⇌ 2SO₃(g), ΔH° = −197 kJ mol⁻¹, Kp = (pSO₃)² / (pSO₂)² pO₂: Kp/atm⁻¹ |
|---|---|---|---|---|---|
400 | 1.0 × 10² | 200 | 1.9 × 10⁻⁶ | 600 | 3.2 × 10³ |
500 | 1.6 × 10⁻¹ | 300 | 1.7 × 10⁻¹ | 700 | 2.0 × 10² |
600 | 3.1 × 10⁻³ | 400 | 5.1 × 10 | 800 | 3.2 × 10 |
700 | 6.3 × 10⁻⁵ | 500 | 1.5 × 10³ | 900 | 6.3 |
800 | 7.9 × 10⁻⁶ | 600 | 1.4 × 10⁴ | 1000 | 2.0 |