10.10.1 Finding the Charge on 1 Mole of Electrons
Electrochemistry
The charge on 1 mole of electrons can be found from a simple electrolytic experiment. The apparatus for this is shown in Figure 10.2.
The procedure is to weigh the pure copper anode and pure copper cathode separately arrange the apparatus during the electrolysis of aqueous copper(II) sulfate as shown in Figure 10.2. The variable resistor is used to keep the current constant pass about 0.2 amperes. Pass a constant electric current for a measured time interval, e.g., 40 min. Remove the cathode and anode and wash and dry them with distilled water and then with propanone. Reweigh the cathode and anode.
The cathode increases in mass because copper is deposited. The anode decreases in mass because the copper goes into solution as copper ions. The decrease in the mass of the anode is measured. This is preferred because the copper does not always stick to the cathode very well.