5.9 Equation of Continuity
Solids and Fluid Dynamics
Solids and Fluid Dynamics
Consider a fluid flowing through a pipe of non-uniform size. The particles in the fluid move along the same lines in a steady state flow as shown in Fig 5.15.
If we consider the flow for a short interval of time Δt, the fluid at the lower end of the tube covers a distance Δx₁ with a velocity v₁, then distance covered by the fluid is:
Let A₁ be the area of cross-section of the lower end, then volume of the fluid that flows into the tube at A₁ is:
If ρ₁ is the density of the fluid, then the mass of the fluid contained in the shaded region (through A₁) is:
Similarly, the mass of the fluid that moves with velocity ‘v₂’ through the upper end of the pipe having cross-sectional area ‘A₂’ in the same time Δt is given by
where ρ₂ is the density of the fluid flowing out through A₂ and Δm indicates small mass.
If the fluid is incompressible and the flow is steady, the mass of the fluid is conserved. That is the mass flowing into the bottom of the pipe through A₁ in a time Δt must be equal to the fluid flowing out though A₂ in the same time. Therefore,
Equation (5.17) is called the equation of continuity. Since density is constant for the steady flow of incompressible fluid, therefore, the equation of continuity becomes:
Equation (5.18) states that in steady flow, the rate of flow inward is equal to the rate of flow outward.
This equation justifies the conservation of mass of the fluid which is flowing through a pipe.
A water hose with an internal diameter of 20 mm at the outlet discharge 30 kg of water in 60 s. Calculate the water speed at the outlet. Assume the density of water is 1000 kg m⁻³ and its flow is steady.
Solution:
Internal diameter of water hose D = 20 mm = 0.02 m
Radius r = D/2 = 0.02/2 = 0.01 m
Mass of water m = 30 kg
Time taken t = 60 s
Density of water ρ = 1000 kg m⁻³
Speed of water v = ?
Mass flow per second m/t = 30 kg / 60 s = 0.5 kg s⁻¹
Cross-sectional area A = πr² = 3.14 x (0.01)² = 3.14 x 1 x 10⁻⁴ m²
From equation of continuity, the mass of water discharging per second through area A is: ρAv = Mass / Second
v = (Mass / Second) / ρA
v = 0.5 kg s⁻¹ / (1000 kg m⁻³ × 3.14 × 10⁻⁴ m²)
= 0.5 × 10 / 3.14 = 0.6 m