1.8.1 Method of Constructing the Graph of an Inverse Function
Graphical Representation of Functions
The graph of an inverse function is obtained geometrically as follows:
(i) Draw the graph of the given one-to-one function.
(ii) Consider the line y=x on the same coordinate plane.
(iii) Reflect the graph of the function about the line y=x.
(iv) The resulting reflected curve represents the graph of the inverse function.
The reflection ensures that each point on the original graph is mapped to a corresponding point on the inverse graph by maintaining equal perpendicular distance from the line y=x
, preserving the geometric symmetry between the two graphs.
Worked example
Example 12
(Logarithmic Graph from Exponential Graph) Show graphically that the function y=lnx is the inverse of the function y=ex.
Given: the exponential function y=ex.
To prove: graphically, that y=lnx is its inverse.
Method: 1.8.1. First confirm that y=ex is one-to-one (so an inverse exists), then reflect its graph in the line y=x and identify the reflected curve.
The function is invertible
Consider the exponential function y=ex. Note that the function y=ex is one to one on ]−∞,∞[
Draw y=ex and the line y=x
We draw the graph of y=ex
Reflect the points about y = x
To obtain the graph of the inverse function, points on the curve y=ex are reflected about the line y=x. Reflecting in y=x swaps the coordinates:(−2,0.14)→(0.14,−2)
Join the reflected points
The curve passing through these reflected points is then drawn (see Figure 1.13). The resulting curve represents the function:y=lnxwhich is clearly defined on the interval ]0,∞[.
Why: step (iv). Every reflected point (ep,p)
Check:
From the table: ln1=0, ln2.72≈1, ln0.37≈−1, ln7.39≈2
Answer: The reflection of the graph of y=ex in the line y=x is the graph of y=lnx. Hence, the function
Figure 1.13: y = ln x as the reflection of y = e^x in the line y = x (original drawing after the textbook's figure)
and its range is
]0,∞[
. Hence, it is invertible and its inverse is defined on
]0,∞[
.
Why: 1.8 says an inverse exists for a one-to-one function (with co-domain = range). The range of
ex
becomes the domain of the inverse.
along with the line
y=x
(see Figure 1.13). Some points of
y=ex
(values rounded):
x=−2,−1,0,1,2
ex≈0.14,0.37,1,2.72,7.39
Why: step (i) and (ii) of the method: the graph of the function and the mirror line on the same axes.
(−1,0.37)→(0.37,−1)
(0,1)→(1,0)
(1,2.72)→(2.72,1)
(2,7.39)→(7.39,2)
Why: step (iii). The point
(p,q)
and its image
(q,p)
have their midpoint on
y=x
and the segment between them is perpendicular to
y=x
, so both are the same distance from the line (the dashed segments in Figure 1.13).