Classification and IUPAC naming of alkanes, cycloalkanes and alkenes, their shapes and physical properties, bond fission and the free-radical halogenation of alkanes. Alkenes: preparation by elimination, sigma/pi structure, carbocation stability via inductive effect, electrophilic addition mechanisms with Markovnikov's rule and eight addition-type reactions of ethene, conjugated dienes, structural isomerism and organic redox reactions.
11.8 Reactions of Alkenes · Reviewed lesson · version 1 · published 16 Nov 2026
Alkenes are unsaturated hydrocarbons and they undergo electrophilic addition reactions mostly. Other minor types of reactions include oxidation, combustion and polymerization reactions.
11.2.4 Physical Properties of Alkanes · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 85 KB
Alkanes containing upto four carbon atoms are colourless, odourless, gases while pentane to heptadecane (C₅ to C₁₇) are colourless, odourless liquids. The higher members from C₁₈ onwards are waxy solids which are also colourless and odourless.
Alkanes are non-polar or very weakly polar and are insoluble in polar solvents like water, but soluble in non-polar solvents, such as hexane, benzene, ether, etc.
Their physical constants, e.g. boiling points, melting points, density, etc increase with the increase in number of carbon atoms, whereas solubility decreases with the increase in molecular mass. The boiling points of alkanes having branched chain structures are lower than their isomeric normal chain alkanes, e.g. straight change butane has a higher boiling point -0.50 ºC than 2-Methylpropane (isobutane, -11.7 °C).
11.1 Aliphatic and Aromatic Hydrocarbons · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Hydrocarbons is a class of organic compounds that consists of only carbon and hydrogen. Hydrocarbons are abundantly found in petroleum and natural gas. They are frequently used as domestic and industrial fuels. Generally, hydrocarbons have many synthetic applications. Unsaturated hydrocarbons, especially alkenes, are used as the starting materials for a number of industrial products. Most of the products in the form of medicines, plastics, perfumes, polymers have their origins in hydrocarbons. Hydrocarbons are broadly divided into two classes that is aliphatic and aromatic hydrocarbons.
11.2 Nomenclature
11.2 Nomenclature · Reviewed lesson · version 1 · published 16 Nov 2026
11.7.1 Reactivity of π bond · Reviewed lesson · version 1 · published 16 Nov 2026
Alkenes are more reactive than alkanes due to the presence of the double bond. The probability of finding electron is away from the line joining the two nuclei. Due to this reason π-electrons are less firmly held between the nuclei. A π bond is, therefore, a weak bond as compared to a σ-bond. During a reaction it breaks comparatively easily rendering alkenes as reactive group of compounds. Moreover, the loosely held π-electrons are more exposed to attack by the electrophilic reagents. Alkenes, therefore, undergo electrophilic addition reactions very easily.
Quick Check 11.5
(a) Homolytic Fission
(a) Homolytic Fission · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 54 KB
Figure 11.5: Homolytic fission and free radical formation (original drawing after the textbook's Figure 11.5).
Homolytic fission occurs when the covalent bond breaks evenly to produce free radicals.
Free radicals are extremely reactive because of the tendency of unpaired electrons to become paired.
11.2.1 Alkanes or Paraffins · Reviewed lesson · version 1 · published 16 Nov 2026
Alkanes are saturated hydrocarbons with the general formula CₙH₂ₙ₊₂. Methane (CH₄) is the simplest member of this family. The homologous series of alkanes with condensed structural formulae and molecular formulae are shown in Table 11.1.
Table 11.1 Condensed structural formulae and molecular formulae of alkanes
IUPAC Name
Molecular formula
Condensed structure
Methane
CH₄
CH₄
Ethane
C₂H₆
CH₃ CH₃
Propane
B. Stereoisomerism
B. Stereoisomerism · Reviewed lesson · version 1 · published 16 Nov 2026
Stereoisomers are such compounds which possess the same structural formula, but differ with respect to the positions of the identical groups in space. It is part of class 12 syllabus and will be covered there.
11.4 Unreactive nature of alkanes towards polar reagents
11.4 Unreactive Nature of Alkanes towards Polar Reagents · Reviewed lesson · version 1 · published 16 Nov 2026
The alkanes or paraffins (Latin: parum = little, affinis = affinity) are inert towards acids, alkalis, oxidizing and reducing agents under ordinary condition. The lack of reactivity of alkanes under normal conditions may be explained on the basis of the non-polarity of the bonds forming them. The electronegativity values of carbon (2.5) and hydrogen (2.1) do not differ appreciably and the bonding electrons between C–H and C–C are equally shared making them almost non-polar and generally unreactive.
The unreactive nature of alkanes can also be explained on the basis of inertness of a sigma bond. In a sigma bond the electrons are very tightly held between the nuclei which makes it a very stable bond. A lot of energy is required to break it.
11.3 Reaction mechanism and modes of bond breaking
11.3 Reaction Mechanism and Modes of Bond Breaking · Reviewed lesson · version 1 · published 16 Nov 2026
Reaction mechanism is the series of steps that take place in the course of the overall reaction. Like all chemical reactions, organic reactions involve the breaking of chemical bonds. There are two ways in which covalent bonds can break.
11.2.3 Nomenclature of cycloalkanes · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Cycloalkanes are named by attaching the prefix ‘cyclo’ to the names of the alkanes possessing the same number of carbon atoms. Figure 11.3
Figure 11.3: Naming cycloalkanes (original drawing after the textbook's Figure 11.3).
Quick Check 11.1
11.10.1 Types of isomerism
11.10.1 Types of Isomerism · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
A. Structural Isomerism
The structural isomerism is not confined to hydrocarbons only. In fact, all classes of organic compounds and their derivatives show the phenomenon of structural isomerism. The structural isomerism arises due to the difference in the arrangement of atoms within the molecule. The structural isomerism can be exhibited in five different ways.
1. The Chain Isomerism
This type of isomerism arises due to the difference in the nature of the carbon chain. For example, for pentane (C₅H₁₂) and butane (C₄H₁₀), the following arrangements are possible.
Chain isomers (original drawing after the scheme printed on p266 of the textbook).
2. Position Isomerism
This type of isomerism arises due to the difference in the position of the same functional group on the carbon chain. The arrangement of carbon atoms remains the same. For example: chloropropane and butene (C₄H₈) can have two positional isomers.
Heterolytic Fission
(b) Heterolytic Fission · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 48 KB
Figure 11.6: Heterolytic fission and formation of ions (original drawing after the textbook's Figure 11.6).
Heterolytic fission occurs when the covalent bond breaks in such a way that the originally shared pair of electrons is gained by one atom only and oppositely charged ions are produced. This bond fission is shown by full curly arrows in mechanisms.
11.6.2 Physical Properties · Reviewed lesson · version 1 · published 16 Nov 2026
i.First three members i.e. ethene, propene and butene are gases at room temperature while C₅ to C₁₅ are liquids and the higher members are solids.
ii.They are insoluble in water but soluble in alcohol.
iii.They have characteristic smell and burn with luminous flame.
iv.Unlike alkanes, they show weakly polar properties because of sp² hybridization
Quick Check 11.4
11.7.1 Structure of alkenes
11.7.1 Structure of Alkenes · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.5 MB
Ethene (C₂H₄) is the simplest alkene. Each carbon atom in ethene is sp² hybridized and forms three equivalent sp² hybrid orbitals which lie in the same plane. The unhybrid p-orbital lies perpendicular (90º) to the plane of hybrid orbitals shown in Figure 11.8.
These sp² orbitals are formed by mixing of the 2s orbital with two 2p orbitals leaving one unhybrid p orbital. In ethene, each carbon uses two sp² orbitals to form two C–H bonds each. The remaining sp² orbital on each carbon is used to form a carbon-carbon σ bond by linear overlap as in Figure 11.9.
The unhybrid p-orbitals of each carbon atom which are parallel to each other overlap laterally to form another carbon-carbon bond. This bond formed by the lateral overlap of p-orbitals is called a π bond.
11.7.3 Electron-withdrawing inductive effect
11.7.3 Electron withdrawing inductive effect · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Electron withdrawing groups, such as a halogen atom, have a negative inductive effect (-I). Halogen withdraws bonded electrons from carbon to carbon bond and thus displays negative inductive effect. This causes a permanent dipole to arise in the molecule wherein the halogen atom holds a negative charge and carbon become partial positive Figure 11.12.
Figure 11.12: Inductive effect: Polarization of sigma bond (original drawing after the textbook's Figure 11.12).
11.5 Reactions of Alkanes · Reviewed lesson · version 1 · published 16 Nov 2026
Under high temperature or suitable conditions, alkanes undergo two types of reactions.
i.Thermal and Catalytic Reactions, e.g. Combustion and cracking
ii.Free radical substitution reactions are the reactions that involve replacement of one atom, or group of atoms by another through the free radical mechanism.
11.7.2 Carbocation stability and inductive effect of alkyl group
11.7.2 Carbocation Stability and Inductive effect of Alkyl group · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 77 KB
Carbocation is an alkyl group with a single positive charge on one of its carbon atoms. Carbocations are classified into following types.
i.Carbocation which is bonded to H only is named as methyl carbocation.
ii.If carbocation is bonded to one C or alkyl substituent then it is named as primary 1º carbocation.
iii.If it is bonded to 2 carbons (alkyl substituent) directly, then it is named as secondary 2º carbocation.
iv.If it is named as tertiary 3º carbocation if it is directly bonded to 3 carbons (alkyl substituent).
The inductive effect of alkyl groups plays an important role in the stability of carbocation.
Alkyl groups have a slightly electron donating Inductive effect. Electron donating species, are said to have positive inductive effect(+I), whereas electron withdrawing species, such as a halogen atom, have a negative inductive effect (-I).
11.11 Organic redox reactions
11.11 Organic Redox Reactions · Reviewed lesson · version 1 · published 16 Nov 2026
Oxidation-Reduction reactions that involve organic compounds are called organic redox reactions. These reactions are characterized by the addition or removal of atoms/bonds. Normally, during organic oxidation, oxygen is added or hydrogen is removed. During organic reduction, hydrogen is added or oxygen is removed. Some examples of oxidation and reduction reactions are given below:
11.2.2 Nomenclature of alkanes · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.5 MB
Branched chain alkanes are named according to the following rules.
1.Locate the longest continuous chain of carbon atoms; this chain determines the parent name for the alkane. We designate the following compound as a hexane because the longest continuous chain contains six carbon atoms, that is, a bent change.
Rule 1, first example: the longest continuous chain of six carbons, a hexane (original drawing after the scheme printed on p247 of the textbook).
The longest continuous chain may not always be obvious from the way the formula is written. Notice, for example, that the following alkane is designated as a heptane because the longest chain contains seven carbon atoms.
Rule 1, second example: a bent seven-carbon chain, a heptane (original drawing after the scheme printed on p247 of the textbook).
2.
11.2.3 Shapes of alkanes and cycloalkanes
11.2.3 Shapes of Alkanes and Cycloalkanes · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.5 MB
The carbon atom in an alkane has four sp³ hybridized orbitals and forms four single bonds that are equidistant from each other Figure 11.4. Alkane molecules have a tetrahedral shape around carbon atoms.
Carbon atoms in alkane molecules form sigma bonds with surrounding carbon and hydrogen atoms.
Figure 11.4: sp3 hybridised methane and ethane (original drawing after the textbook's Figure 11.4).
As a result, carbon atoms in alkanes are surrounded by 4 pairs of bonding electrons which equally repel each other to form 109.5° bond angles and a C-C bond length of 1.54 Å. The shapes of organic molecules are generally represented using ball and stick formula. The shapes of some straight chain alkanes are shown (Table 11.4).
Reduction
a) Reduction · Reviewed lesson · version 1 · published 16 Nov 2026
Addition of hydrogen to carbon-carbon double bond to form alkane is an example of organic reduction reaction.
11.6.1 Nomenclature of Alkenes · Reviewed lesson · version 1 · published 16 Nov 2026
Alkenes have two hydrogen atoms less than the corresponding saturated hydrocarbons.
The IUPAC rules for naming alkenes are similar in many respects to those for naming alkanes.
1.Select the longest continuous chain that contains the C = C as the parent chain. Change the ending of the name of the alkane of identical length from — ane to — ene, e.g.,
11.6.2 Preparation of Alkenes · Reviewed lesson · version 1 · published 16 Nov 2026
Alkenes are prepared by the removal of small atoms (H,OH,X) from the adjacent carbon atoms of the saturated compounds, so as to create a double bond between carbon atoms. These reactions are known as elimination reactions. In such reactions, a small molecule such as H₂O or HCl, is removed from adjacent carbons in an organic molecule. Preparation of ethene through various methods is being discussed below.
i) Dehydration of Alcohols
Ethene is prepared by heating a mixture of ethanol and excess of concentrated sulphuric acid at 180°C. The reaction involves the removal of a water molecule from the alcohol molecule.
11.5.1 Free radical Substitution Reactions · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Substitution reactions of alkanes take place in the presence of light energy through the formation of highly reactive free radicals. An example is the substitution of a halogen atom with a hydrogen of an alkane, called halogenation. Alkanes react with chlorine and bromine in the presence of sunlight or UV light resulting in the successive replacement of hydrogen atoms with halogens. The extent of halogenation depends upon the amount of halogen used. Reaction of alkanes with fluorine is highly violent and results in a mixture of carbon, fluorinated alkanes and hydrofluoric acid. Iodine does not substitute directly because the reaction is too slow and reversible. The order of reactivity of halogens is:
FX2>ClX2>BrX2>IX2
swipeF₂ > Cl₂ > Br₂ > I₂
11.9 Conjugated dienes
11.9 Conjugated Dienes · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
As the name indicates, a diene is a molecule containing two double bonds between carbon atoms. In a Conjugated diene, the double bonds in the carbon chain are separated by a single bond. The adjacent double bonds in conjugated dienes allow for the overlap of p-orbitals on three or more adjacent atoms. This overlap leads to a delocalization of electrons, which can stabilize the molecule and affect its reactivity. In conjugated dienes pi-bond overlap extends over the entire system.
11.11.1 Oxidation · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Oxidation of organic compounds involving reaction with oxygen is usually the combustion reaction:
CX2HX6+2OX22COX2+3HX2
swipeC₂H₆ + 2O₂ → 2CO₂ + 3H₂
11.8.1 Electrophilic addition reactions
11.8.1 Electrophilic Addition Reactions · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.9 MB
The reactions in which an electrophile is added to the double bond of an alkene is called electrophilic addition reaction.
Mechanism of electrophilic addition in alkenes
Figure 11.13: Generalized mechanism of electrophilic addition (original drawing after the textbook's Figure 11.13).
The C=C in alkenes is a region of high electron density making susceptible to attack by electrophiles. Alkenes reacts with an electrophile to give a carbocation intermediate that then reacts with a nucleophile. In the generalized mechanism Figure 11.13, X⁺ represents an electrophile and Y⁻ represents a nucleophile.
Quick Check 11.6
11.10 Isomerism
11.10 Isomerism · Reviewed lesson · version 1 · published 16 Nov 2026
The concept of isomerism is an important feature of organic compounds.
The structural formula of a compound shows the arrangement of atoms and bonds present in it.
The simplest hydrocarbon to have structural isomers is butane (C₄H₁₀). If we study the structural formula of butane or other higher hydrocarbons of the alkane family, we will observe that it is possible to arrange the atoms present in the molecule in more than one way to satisfy all valencies. This means that it is possible to have two or more different arrangements for the same molecular formula. For example, chlorobutane molecule can have two different arrangements as represented by the following structural formulas:
swipeCH₃CH₂CH₂CH₂Cl (1-Chlorobutane) and CH₃CHClCH₂CH₃ (2-Chlorobutane)
Alkanes are acyclic aliphatic hydrocarbons, whereas cycloalkanes are cyclic aliphatic hydrocarbons. Alkenes and alkynes are acyclic and unsaturated aliphatic hydrocarbons. Figure 11.1 shows some examples of aliphatic hydrocarbons.
Figure 11.1: Aliphatic hydrocarbons (original drawing after the textbook's Figure 11.1).
Aromatic hydrocarbons is a special class of cyclic hydrocarbons that have high carbon to hydrogen ratio and are based on benzene (C₆H₆) or resembling compounds. Benzene is the basic aromatic compound and other compounds such as toluene and phenol are its derivatives. Figure 11.2 presents the structures of some aromatic hydrocarbons.
Figure 11.2: Some aromatic hydrocarbons (original drawing after the textbook's Figure 11.2).
The reactions of alkenes mostly proceed through the formation of carbocations. Therefore, before studying the addition reactions of alkenes, the concept of carbocations and their stability is very important.
What we obtain after the removal of one hydrogen atom from an alkane is called an alkyl group. The resulting alkyl groups are named by replacing –ane of the alkanes with –yl. Few examples are shown in Table 11.2 & Table 11.3.
Table 11.2 alkyl groups, their names and abbreviations
Alkane
Alkyl group
Abbreviation
CH₄ Methane
CH₃- Methyl
Me–
CH₃-CH₃ Ethane
CH₃-CH₂- Ethyl
Et–
swipe
For alkanes with more than two carbon atoms, more than one alkyl groups can be derived.
Table 11.3 alkyl groups, straight chain and branched and their names
Alkane
Possible Alkyl Groups
CH₃CH₂CH₃ Propane
CH₃ CH₂CH₂ –
n-Propyl group (Propyl)
CH₃CH(–)CH₃
iso-Propyl group (1-Methylethyl)
H₃CCH₂CH₂CH₃
CH₃CH₂CH₂CH₂ –
n-Butyl group (Butyl)
CH₃CH₂CH(–)CH₃
sec-Butyl group (1-Methylpropyl)
CH₃CH(CH₃)CH₂ –
Iso-Butyl group (2-Methylpropyl)
CH₃C(–)(CH₃)CH₃
tert-Butyl group (1,1-Dimethylpropyl)
Position isomers (original drawing after the scheme printed on p267 of the textbook).
3. Functional Group Isomerism
The compounds having the same molecular formula but different functional groups are said to exhibit functional group isomerism. For example, there are two compounds having the same molecular formula C₂H₆O, but different arrangement of atoms.
Functional group isomers (original drawing after the scheme printed on p267 of the textbook).
4. Metamerism
This type of isomerism arises due to the unequal distribution of carbon atoms on either side of the functional group. Such compounds belong to the same homologous series. For example, diethyl ether and methoxy methane.
Metamers: ethoxy ethane and methoxy propane (original drawing after the scheme printed on p267 of the textbook).
For a ketonic compound having the molecular formula C₅H₁₀O, the following two metamers are possible.
Metamers: 3-pentanone and 2-pentanone (original drawing after the scheme printed on p267 of the textbook).
5. Tautomerism
This type of isomerism arises due to shifting of proton from one atom to another in the same molecule. This is commonly seen in amino acids. They exist as zwitterions which are formed when a proton is shifted from the carboxylic acid end of amino acid molecule to the amine group.
Tautomerism: amino acid and zwitterion (original drawing after the scheme printed on p267 of the textbook).
Ripe cherries, beside the Interesting Information box on ethene (original drawing after the photo printed on p257 of the textbook).
Figure 11.8: sp2 hybrid & unhybrid orbitals of C (original drawing after the textbook's Figure 11.8).
Figure 11.9: Bond formation of carbons in ethene (original drawing after the textbook's Figure 11.9).
The two carbon atoms forming a double bond and the four atoms attached directly to them lie in the same plane. The remaining p-orbital on each carbon is used to form the π bond.
Figure 11.10: Structure of ethene (original drawing after the textbook's Figure 11.10).
The sp² hybridization results in a trigonal planar arrangement around each carbon atom. The bond angles are approximately 120º, leading to a planar molecule as shown in Figure 11.10.
The alkyl groups attached to the positively charged carbon atoms are electron donating groups. Due to the positive charge on the carbon atom, carbocation is electrophile. The inductive effect is shown by the arrowheads on the bonds to show the alkyl groups pushing electrons towards the positively charged carbon.
Figure 11.11: Inductive effect & stability of carbocation (original drawing after the textbook's Figure 11.11).
As a result of this, the carbocation become less positively charged which makes it energetically more stable. The stability of carbocation ions increases with a number of alkyl groups due to their +I effect. This means that tertiary carbocation is the most stable as they have three electron-donating alkyl groups which energetically stabilize the carbocation Figure 11.11.
Number the longest chain beginning from the end nearest to the substituent. Applying this rule, we number the two alkanes shown above in the following way.
Rule 2 examples: numbering from the end nearest the substituent (original drawing after the scheme printed on p247 of the textbook).
3.Use the numbers obtained by the application of rule 2 to designate the location of the substituent group. The parent name is placed last, and the substituent group, preceded by the number designating its location on the chain, is placed first. For example:
Rule 3 examples: 3-methylheptane and 2-methylhexane (original drawing after the scheme printed on p248 of the textbook).
4.When two or more substituents are present, give each substituent a number corresponding to its location on the longest chain. For example, we designate the following compound as 4-Ethyl-2-methylhexane.
Rule 4 example: 4-ethyl-2-methylhexane (original drawing after the scheme printed on p248 of the textbook).
The substituent groups should be listed alphabetically (i.e. ethyl before methyl). While deciding on alphabetical order ignored multiplying prefixes such as “di” and “tri”.
5.When two substituents are present on the same carbon atom, use that number twice.
Rule 5 example: 3-ethyl-3-methylhexane (original drawing after the scheme printed on p248 of the textbook).
6.When two or more substituents are identical, indicate this by the prefixes di, tri, tetra, and so on. Then make certain that each and every substituent has a number.
Rule 6 examples: 2,3-dimethylbutane, 2,3,4-trimethylpentane and 2,2,3,3-tetramethylbutane (original drawing after the scheme printed on p248 of the textbook).
Application of these six rules allows us to name most of the alkanes that we shall encounter. Two other rules, however, may be required occasionally.
7.When two chains of equal length compete for selection as the parent chain, choose the chain with the greater number of substituents.
Rule 7 example: 2,3,5-trimethyl-4-propylheptane (original drawing after the scheme printed on p249 of the textbook).
8.When branching first occurs at an equal distance from either end of the longest chain, choose the name that gives the lower number at the first point of difference.
Rule 8 example: 2,3,5-trimethylhexane (original drawing after the scheme printed on p249 of the textbook).
Table 11.4 Shapes of some straight chain alkanes (original drawing after the textbook's Table 11.4).
Cycloalkanes are cyclic, meaning that the carbon atoms of the molecule are arranged in the form of a ring. Cycloalkanes are also saturated, meaning that all of the carbons atoms that make up the ring are singly bonded to other atoms. The structural shapes of cyclopropane, cyclobutane and cyclopentane are shown below (Table 11.5)
Table 11.5 Shapes of few cycloalkanes (original drawing after the textbook's Table 11.5; the formula in red is printed so in the book, see the correction below).
Various reducing agents are used in Organic synthesis. e.g; LiAlH₄, NaBH₄, Sn + conc.HCl. Reduction of nitriles to amines, amides to amines, carboxylic acid to primary alcohols, nitrobenzene to phenylamine are all examples of reduction and will be studied in class 12 syllabus.
On heating, ethyl bromide with alcoholic KOH, ethene is formed. Removal of hydrogen and halogen takes place from adjacent carbon atoms to create a double bond.
i)Initiation step is the first step in the mechanism of free radical substitution of alkanes by halogens. It involves the breaking of the halogen-halogen bond using energy from the UV light.
Initiation step: homolysis of chlorine in UV light (original drawing after the scheme printed on p253 of the textbook).
ii)Propagation step is the second step in the free radical substitution in which the initially formed radicals attack the alkane molecule generating more free radicals.
Propagation step (original drawing after the scheme printed on p253 of the textbook).
iii)Termination step is the final step in a free radical substitution in which two free radicals react together to form a product. The termination may take place in different ways. The chloride and alkyl radicals may combine to form an chloroalkanes or two chloride radicals may also react to make the chlorine molecule. Another termination mode is the formation of alkane with double number of carbon atoms which takes place when two alkyl radicals merge together. This type of termination is rare and the alkanes with double carbon atoms are formed in traces. However, its presence is evident of free radical substitution mechanism.
Termination step: i) to iii) (original drawing after the scheme printed on p254 of the textbook).
By repetition of step (ii), propagation step, a mixture of halogen substituted products (chloroalkanes) is obtained. The more the chlorine gas in reaction mixture to start with, the greater the proportions of chlorine atoms in the chloroalkane molecules formed.
Trichloromethane is also known as chloroform and tetrachloromethane is also known as carbon tetrachloride.
Successive substitution of chloromethane to tetrachloromethane (original drawing after the scheme printed on p254 of the textbook).
Conjugated dienes and delocalization of pi electrons (original drawing after the scheme printed on p265 of the textbook).
Conjugated alkenes are an important class of compounds in organic chemistry, featuring unique properties due to the arrangement of their double bonds. Conjugated dienes like 1,3-butadiene are used in the production of synthetic rubber. The conjugated structure allows for polymerization, leading to long chains that exhibit rubber-like properties.
Reactions of organic compounds with oxidizing agents.e.g.
i)Ozonolysis is a method of oxidatively cleaving alkenes using ozone (O₃).
i) Ozonolysis of propene (original drawing after the scheme printed on p268 of the textbook).
ii)The epoxidation of alkene is also example of oxidation reaction. In this reaction various oxidizing agents can be used like molecular oxygen and metal catalysts.
ii) Epoxidation of an alkene (original drawing after the scheme printed on p268 of the textbook).
iv)Reaction of primary alcohols with acidified K₂Cr₂O₇ to make carboxylic acids, detail will be discussed in class 12 syllabus.
In this chapter, only the mechanism of halogen addition and hydrogen halide addition will be learnt.
1. Halogenation
Halogenation means addition of halogens like chlorine or bromine. When bromine water (a solution of bromine in water having red-brown colour) is added to ethene in an inert solvent like carbon tetrachloride, its reddish brown colour is discharged at once. This reaction is used to identify the unsaturation of an organic compound.
CHX2=CHX2+BrX2Br−CHX2−CHX2−Br
swipeCH₂=CH₂ + Br₂ → Br-CH₂-CH₂-Br
Mechanism
The above reaction proceeds through a three–steps mechanism as given below:
i)Bromine (Br₂) is a non-polar molecule, however, when a bromine molecule gets closer to the double bond of an alkene, the high electron density in the double bond repels the electron pair in Br-Br away from the Br atom. As a result of this, the Br atom closest to the double bond is slightly positive and acts as an electrophile.
Step (i): the double bond induces a dipole in Br2 (original drawing after the scheme printed on p260 of the textbook).
ii)The δ⁺ bromine of Br₂ is attacked by the π electrons in the double bond and the partial positive bromine accepts a pair of electrons from the C=C bond in the alkene. This results in the formation of a highly reactive carbocation intermediate.
iii)This carbocation intermediate reacts with the Br⁻ (nucleophile) to make the product. Mechanism is shown below Figure 11.14.
Figure 11.14: Electrophilic addition mechanism of ethene and Br2 (original drawing after the textbook's Figure 11.14).
2. Hydrohalogenation
When an alkene reacts with dry gaseous hydrogen halide at room temperature, the product is a halogenoalkane.
Hydrogen halides are among the simplest examples of polar substances having permanent dipoles that add to alkenes Figure 11.15. All hydrogen halides (HBr,HCl,HI,HF) give this reaction and add across C=C exactly the same way. But, the rate of reaction increases from HF to HI. The actual product formed depends upon whether the alkene is symmetrical or unsymmetrical.
Figure 11.15: HBr molecule polarity (original drawing after the textbook's Figure 11.15).
i)Addition to symmetrical alkenes: When the alkene (e.g. ethene) is symmetrical only one product is theoretically possible. Let us look at the mechanism of addition of HBr to ethene.
Mechanism:
i.Nucleophilic pi-bond attacks the hydrogen in hydrogen halide. Hydrogen bromide gives a bromide ion (Br⁻). Ethene is converted to carbocation by adding hydrogen to one of the double bonded carbons.
ii.The bromide ion (nucleophile) attacks the carbocation to give the addition product Figure 11.16.
Figure 11.16: Electrophilic addition mechanism of HBr to ethene (original drawing after the textbook's Figure 11.16).
ii)Addition to unsymmetrical alkenes: When the alkene is unsymmetrical, two products are theoretically possible. For example, the addition of HBr to propene can give two products. But experimentally, it has been found that under these conditions, the major product is 2-bromopropane and the minor product is 1-bromopropane.
Markovnikov’s Rule is applicable for addition reactions in alkenes. According to this rule,
Mechanism
Propene reacts with HBr in two ways. The mechanism of this reaction involves the following steps.
i.The pi electrons of C=C attacks on partial positive end of H-Br. Hydrogen bromide breaks heterolytically creating bromide ion (electrophile) and hydrogen is added to double bonded carbon with more number of hydrogen, creating a 2º carbocation.
ii.The bromide ion attacks the secondary carbocation to give the major product. The minor product is formed by the attack on primary carbocation Figure 11.17.
Figure 11.17: Electrophilic addition mechanism of HBr to propene (original drawing after the textbook's Figure 11.17).
Quick Check 11.7
3. Hydrogenation
Hydrogenation means addition of molecular hydrogen to an alkene in the presence of a catalyst (Ni/ Pt) to form a saturated compound at 250-300 ⁰C.
HX2C=CHX2+HX2Ni250-300 °CHX3C−CHX3
swipeH₂C=CH₂ + H₂ → [Ni, 250–300 °C] H₃C–CH₃
On industrial scale, this reaction is used to convert vegetable oil into margarine (Banaspati ghee).
Oil+HX2NiMargarine (Banaspati ghee)
swipeOil + H₂ → [Ni] Margarine (Banaspati ghee)
4. Hydration
Gaseous alkenes react with steam at high temperature and pressure in the presence of concentrated acid (H₂SO₄) as the catalyst to form alcohols.
HX2C=CHX2+HX2OHX2SOX4CX2HX5OH
swipeH₂C=CH₂ + H₂O → [H₂SO₄] C₂H₅OH
Similar to hydrohalogenation, the alkene forms a carbocation intermediate, which is then attacked by OH⁻.
5. Halohydration
Halohydration is a reaction where an alkene reacts with a halogen (such as bromine or chlorine) in the presence of water to form a halohydrin. For ethene (C₂H₄), the reaction specifically produces a bromohydrin or chlorohydrin, depending on the halogen used.
In the case of ethene (C₂H₄), this reaction can be accomplished using various oxidizing agents. Ethene can also be converted to ethylene oxide using molecular oxygen and metal catalysts. A transition metal catalyst facilitates the reaction, forming an epoxide directly from the alkene. The epoxides can be converted in to diols by acid hydrolysis.
Epoxidation of ethene and hydrolysis of the epoxide (original drawing after the scheme printed on p263 of the textbook).
7. Ozonolysis
Ozonolysis is a method of oxidatively cleaving alkenes using ozone (O₃), a reactive allotrope of oxygen. This reaction is often used to identify the structure of unknown alkenes by breaking them down into smaller, more easily identifiable pieces. Alkenes react with ozone (O₃) to form ozonides, which can be further reduced to carbonyl compounds (aldehydes or ketones), and ultimately to alcohols.
CX2HX4+OX3CX2HX4OX32CHX2O
swipeC₂H₄ + O₃ → C₂H₄O₃ → 2CH₂O
Ozonolysis of propene (original drawing after the scheme printed on p264 of the textbook).
Quick Check 11.8
8. Polymerization
Addition polymerization is one of the most important addition reactions of alkenes which form the basis of the plastics industry. Addition polymerization is the reaction in which many monomers containing at least one C=C double bond form long chains of polymers as the only product.
Just like in other addition reactions of alkenes, the π-bond in each C-C bond breaks and then the monomers link together to form new C-C single bonds. A polymer is a long-chain molecule that is made up of many repeating units.
Addition polymerisation of ethene and chloroethene (original drawing after the scheme printed on p264 of the textbook).
Ball pen (original drawing after the photo printed on p264 of the textbook).
This ball pen is made of PVC
Deducing repeating units
A repeating unit is the smallest group of atoms that when connected one after the other make up the polymer chain. It is represented by square brackets in the displayed and general formula.
In poly(alkenes) (such as poly(ethene)) and substituted poly(alkenes) (such as PVC) made of one type of monomer, the repeating unit is the same as the monomer except that the C-C double bond is changed to a C-C single bond.
Deducing the repeating unit of poly(ethene) (original drawing after the scheme printed on p265 of the textbook).
This fact has been supported by an experimental evidence that there are two compounds with different physical properties but with the same molecular formula of C₄H₉Cl. Isomerism is not only possible but common if the compound contains more than three carbon atoms. As the number of carbon atoms in a hydrocarbon increases, the number of possible isomers increase very rapidly. The five carbon compound, pentane, has three isomers.