States and Phases of MatterStates and Phases of Matter
Kinetic-molecular view of gases, liquids and solids. Ideal gas equation and Mr determination; three intermolecular forces with the hydrogen-bond explanation of water's anomalous properties; liquid properties (surface tension, viscosity, evaporation, vapour pressure, boiling point, phase-change enthalpies); solids (crystalline vs amorphous, crystal properties) and liquid crystals with applications.
5.5 Surface Tension of Liquids · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.7 MB
Mosquitos can float on surface on water due to high surface tension (original drawing after the photograph printed in the textbook).
Surface tension is a property of liquids that describes the force acting along the surface of a liquid, causing it to behave like an elastic sheet. This force arises due to the intermolecular forces between the molecules at the surface.
Molecules at the surface experience a net force inward due to intermolecular forces, leading to a "skin" on the surface. Liquids tend to minimize their surface area due to surface tension, which explains why droplets form spheres. Surface tension influences various phenomena, such as, capillary action, wetting of surfaces and formation of droplets and bubbles.
5.4.3 Hydrogen Bonding · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Hydrogen bond is a special type of dipole-dipole force. It is the strongest force among intermolecular forces, but is weaker than all the major types of bond, i.e. ionic, metallic, and covalent bonds. A hydrogen bond is formed when the following conditions are fulfilled:
i.The hydrogen atom is connected to a highly electronegative atom, such as F, O, or N
ii.The electronegative atom must have a lone pair of electrons on it.
The covalent bond between a highly electronegative atom and hydrogen is highly polarized. It means the hydrogen atom carries a sufficient δ+ charge and the electronegative atom δ− charge. The presence of lone pair on the electronegative allows the partial positively charged hydrogen atom to make a bond with F, O, or N called a hydrogen bond. This bond is represented by a dotted line (…) and its strength is one tenth of an ordinary covalent bond. The number of hydrogen bonds a molecule can form on average depends on:
The number hydrogen atoms bonded to the electronegative atom
The number of lone pairs present on F, O, or N
Figure 5.4: Hydrogen bonding in water (original drawing after the textbook's Figure 5.4).
v) Inter-particle forces in solids
v) Inter-particle forces in solids · Reviewed lesson · version 1 · published 16 Nov 2026
In solids, the particles (atoms, ions, molecules) are held together by ionic, covalent, metallic or van der Waals forces. These forces are strong enough to fix the particles at their places thus allowing these particles to just vibrate about their mean positions.
Properties of amorphous solids · Reviewed lesson · version 1 · published 16 Nov 2026
i.The amorphous solids can have small regions where orderly arrangement of particles is found, but they do not have long range of regularity. The regions where orderly arrangement of particles is present are known as crystallites.
ii.Amorphous solids like glass melts over a wide temperature range.
iii.They can be molded and blown to form different shapes.
iv.Amorphous solids do not have definite value of heat of fusion.
Table 5.5 Comparison of crystalline and amorphous solids.
Property
Crystalline solids
Amorphous solids
1. Geometry of solid
Crystalline solids show characteristic geometrical shapes.
Amorphous solids generally appear in lump or in a fine powder form.
2. Melting of solid
5.11 General properties of solids
5.11 General properties of solids · Reviewed lesson · version 1 · published 16 Nov 2026
i) Compression of solids
The atoms, molecules or ions of a solid substance are closely packed. The particles of solids cannot move closer to each other unlike gases. It is true for metallic solids that their atoms are spherically symmetrical. So, when such particles are arranged, they can give birth to hexagonal and cubic close-packed structures. Here outer boundaries of constituent particles touch each other but due to their spherical shapes, they cannot occupy more than 74% space. It means the compression of solids is not possible.
ii. Surface area (shape of molecule) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
A molecule with larger surface area has more number of contacts for a nearby molecule. Thus the forces among the molecules of a compound having larger surface area are stronger. Consider saturated hydrocarbons. These have chains of carbon atoms linked with hydrogen atoms. Compare the length of the chains in C₂H₆ and C₆H₁₄. They have the boiling points −88.6 °C and 68.7 °C, respectively. It is evident that the molecules with larger chain length experiences stronger attractive forces. The reason is that longer molecules have more places along the length where they can be attracted to other molecules. Boiling points of some hydrocarbons are given in Table 5.2.
Table 5.2 Boiling points and physical states of some hydrocarbons
Name
B.P. °C (1 atm)
Physical state at S.T.P.
Name
B.P. °C (1 atm)
Physical state at S.T.P
Methane (CH₄)
-164
Gas
i) In diagnostics
i) In diagnostics · Reviewed lesson · version 1 · published 16 Nov 2026
Special liquid crystal devices can be used to diagnose the tumors and infections in the human body. This is because often physical problems, such as tumors, have a different temperature than the surrounding tissue. When cholesteric liquid crystals are applied to the breast, a tumor is located because of being warmer than the other parts. This technique is successfully applied to diagnose breast cancer in the early stage.
iv) Inter-particle space in solids · Reviewed lesson · version 1 · published 16 Nov 2026
The interpaticle spaces in solids are far less than liquids. This is due to the stronger forces among their particles. Due to closely packed atoms, molecules, and ions, solids are mostly hard, have high melting points and high stability.
iv. Surface tension and viscosity · Reviewed lesson · version 1 · published 16 Nov 2026
The surface tension and viscosity of water are also very high. Surface tension is a downward pull of water molecules at the surface, making the water surface stretched and strained. This downward pull is due to the attraction of inner molecules through hydrogen bonds.
Viscosity is the resistance by a liquid to its flow. Water has higher viscosity than many of liquids including lower hydrocarbons and alcohols (e.g. hexane and ethanol. The high viscosity of water is also due strong hydrogen bonds among the molecules. Alcohols can make hydrogen bonds, but the strength and extent of hydrogen bonding is far less than that in water. Hydrocarbons lack the ability to make the hydrogen bond.
Quick Check 5.4
Solids
Solids · Reviewed lesson · version 1 · published 16 Nov 2026
Solids are those substances which are rigid, hard, have definite shape and definite volume. The atoms, ions and molecules that make up a solid are closely packed. They are held together by strong cohesive forces. The constituent atoms, ions or molecules of solids cannot move at random.
ii) Characteristic higher temperature determination
ii) Characteristic higher temperature determination · Reviewed lesson · version 1 · published 16 Nov 2026
Liquid crystal temperature sensors can also be used to find faulty connections on a circuit board by detecting the characteristic higher temperature. As temperature sensors, they are be used in thermometers.
5.9 Boiling Point · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Figure 5.9: Vapour pressures (torr) of four common liquids shown as a function of temperature (original drawing after the textbook's Figure 5.9).
When a liquid is heated, its vapour pressure goes on increasing. A stage reaches when the vapour pressure of the liquid becomes equal to the atmospheric or external pressure. At this temperature the liquid starts boiling. The reason for this is that the bubbles of vapour which are formed in the interior of the liquid have greater internal pressure than atmospheric pressure on the surface of liquid. This makes the bubbles to come out of the liquid and burst at the surface. A constant stream of bubbles comes out at the boiling point of the liquid.
When a liquid is heated, the kinetic energy of its molecules increases. This causes the increase of the temperature. At the boiling point, the kinetic energy of the molecules becomes maximum. Any further heating at this stage will not increase the temperature. This further heating is utilized to break the intermolecular forces and convert the liquid into its vapour. The boiling points of some commonly available liquids at one atmospheric pressure are shown in the Table (5.9).
The Figure 5.9 shows the variation of vapour pressure of water, ethyl alcohol, ethylene glycol and diethyl ether with temperature. The graphs show that the liquids reach upto their boiling points when their vapour pressures are equal to 760 torr at sea level.
ii. High Heat Capacity
ii. High Heat Capacity · Reviewed lesson · version 1 · published 16 Nov 2026
Water has a high specific heat capacity. This is due to its unique molecular structure which allows strong hydrogen bonds.
iii) Motion of particles in solids · Reviewed lesson · version 1 · published 16 Nov 2026
The constituent particles of a solid do not undergo translatory motion, and neither rotational ones. They only vibrate about their mean positions. These vibrations become more intense at higher temperature.
2) External pressure · Reviewed lesson · version 1 · published 16 Nov 2026
As already explained that when vapour pressure of a liquid becomes equal to the external pressure then the liquid boils. It means that when external pressure is changed, its boiling point will also change. When the external pressure is high the liquid requires greater amount of heat to equalize its vapour pressure to external pressure. In this way boiling point is raised. Similarly, at a lower external pressure a liquid absorbs less amount of heat and it boils at a lower temperature.
For example, water shows B.P of 120 °C at 1489 torr pressure and boils at 25 °C at 23.7 torr. Water boils at 98 °C at Murree hills due to external pressure of 700 torr while at the top of Mount Everest water boils at only 69 °C at 323 torr.
We can increase the external pressure artificially on the surface of boiling water by using a pressure cooker. Pressure cooker is a closed container. The vapour of water formed is not allowed to escape. In this way, it exerts they develop more pressure on the water surface in the cooker and the boiling temperature increases. As more heat is absorbed in water, so food is cooked quickly under increased pressure.
Quick Check 5.7
5.1 Properties of gases
5.1 Properties of Gases · Reviewed lesson · version 1 · published 16 Nov 2026
Matter exists in four states i.e., solid, liquid, gas and plasma. The simplest form of matter is the gaseous state and most of matter around us is in the solid state. Liquids are less common than solids, gases and plasmas. The reason is that the liquid state of any substance can exist only within a relatively narrow range of temperature and pressure.
5.7 Evaporation
5.7 Evaporation · Reviewed lesson · version 1 · published 16 Nov 2026
Evaporation is the spontaneous conversion of a liquid into vapour at any temperature.
When high energy molecules leave the liquid and low energy molecules are left behind, the temperature of the liquid falls. The heat moves from the surrounding to the liquid and then the temperature of the surrounding also falls. This phenomenon helps to understand that evaporation causes cooling.
A person after bath feels a sense of cooling due to evaporation of water from his body when exposed to air. The molecules of H₂O take away the energy of body. Earthenware vessels keep water cooler under the same phenomenon. Earthenware vessels are porous.
The water molecules having sufficient K.E to overcome inter molecular forces come out of these pores and evaporate. This process of evaporation keeps on taking place and energy required for this process comes from the liquid. Thus, the average K.E of remaining water molecules decreases which results in decrease in temperature of the liquid. Hence, earthenware vessels keep water cool.
1) Strength of intermolecular forces · Reviewed lesson · version 1 · published 16 Nov 2026
Stronger the intermolecular forces, lower will be the vapour pressure and higher will be the boiling point. Higher boiling point of H₂O indicates stronger intermolecular forces than that of ethanol and methanol, Table 5.4.
Table 5.4 Boiling points of some common liquids at 760 torr (1 atm.)
Liquids
Formula
B.P (°C)
Liquids
Formula
B.P (°C)
Acetic acid
CH₃COOH
118.50
Carbon tetrachloride
CCl₄
76.50
Acetone
Effect of Molar heat of vaporization and fusion on matter particles
Effect of Molar heat of vaporization and fusion on matter particles · Reviewed lesson · version 1 · published 16 Nov 2026
The molar heat of fusion and vaporization affect the particles that make up matter by providing them with enough energy. Due to this, the particle move away from one another and change the state of the substances from solids to liquids and liquids to gases respectively. Particles gain more freedom to move and rotate in the liquid and gas phase.
vi) Kinetic energy based on KMT · Reviewed lesson · version 1 · published 16 Nov 2026
Kinetic energy is due to the motion of constituent particles of a solid. Solid particles have only vibratory motion and they do not have translational or rotational motion. Therefore, the only kinetic energy that solids possess is vibrational kinetic energy.
iii) Liquid crystal displays (LCDs) · Reviewed lesson · version 1 · published 16 Nov 2026
The most common application of liquid crystal technology is liquid crystal displays (LCDs.). Examples of liquid crystal screens are oscillograph and TV, laptops, cell phone displays. Liquid crystals are used in TV displays, computer screens, calculators and watches, etc.
As new properties and types of liquid crystals are investigated and researched, these materials are sure to gain increasing importance in industrial and scientific applications.
iii. Anomalous heat of vaporization and boiling point
iii. Anomalous heat of vaporization and boiling point · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
The general trend of enthalpy change of vaporization of group 16 hydrides is a regular increase from H₂S to H₂Po (Figure 5.7). This is because the molecules of these compounds are bound by weak London dispersion forces.
Figure 5.7: A graphical expression of variation in enthalpy of vaporization and B.Ps of group 16 hydrides (original drawing after the textbook's Figure 5.7).
With the increasing atomic size down the group, from S to Po, the van der Waals forces also become stronger. If water had followed this trend, the heat of vaporization of water would be the lowest among the group members. However, water has the highest enthalpy change of vaporization (41 kJ mol⁻¹) in the group. This is because water is exceptionally hydrogen bonded, which makes it difficult to break forces among water molecules and vaporize it. The boiling point of water is also remarkably higher than the rest of group 16 hydrides. Simply, the energy required to break the water molecules apart is very high due to extensive hydrogen bonding in it. It needs high temperatures to provide so much energy as to boil water into its vapor.
Properties of crystalline solids · Reviewed lesson · version 1 · published 16 Nov 2026
i. Geometrical shape
All the crystalline solids have a definite, distinctive geometrical shape due to definite and orderly arrangement of atoms, ions or molecules in three-dimensional space. For a given crystal, the interfacial angles, at which the surfaces intersect, are always the same no matter in which shape they are grown. The faces and angles remain characteristic even when the material is ground to a fine powder.
ii. Melting points
Crystalline solids have sharp melting points. They can be identified from their definite melting points.
iii. Cleavage planes
Whenever the crystalline solids are broken they do so along definite planes. These planes are called the cleavage planes and they are inclined to one another at a particular angle for a given crystalline solid. The value of this angle varies from one solid to another solid.
iv. Growing of a crystal
When we have a saturated or super saturated solution of a crystalline material in a suitable solvent, it can give us same types of crystals by arranging atoms, ions or molecules. This happens through the process called growth of crystals. This can be done by slow evaporation of the solvent or by seeding process from saturated solution.
For example, the solubility of sodium thiosulphate (Na₂S₂O₃) in water at 100 °C is 231g/100 cm³. At room temperature solubility is 50 g / 100 cm³. In case, we have saturated solution of Na₂S₂O₃ at 100 °C, on cooling slowly no growth of crystal happens. It means that super saturated solution is not in equilibrium with solid substance. Now, if small crystal of Na₂S₂O₃ is added to super saturated solution, the crystallization happens rapidly.
5.12.2 Amorphous solids
5.12.2 Amorphous solids · Reviewed lesson · version 1 · published 16 Nov 2026
Amorphous solids, contrary to the crystalline solids, do not possess regular three dimensional geometrical shapes. The examples of amorphous solids are glass, wood, amorphous sulphur (plastic sulphur), charcoal, coal, coke, etc.
i. Molecular mass and size · Reviewed lesson · version 1 · published 16 Nov 2026
When the molecular mass (Mᵣ) of a compound is greater, the id-id forces are stronger and vice versa. This is because in a larger atom or molecule the dispersion of electronic cloud and polarisation is relatively easier. This factor operates in the halogen and noble gas families. The physical state changes in the halogen family from top to bottom due to the increase in size and polarizability. The first two members in the halogen family (F₂ and Cl₂) are gases, but bromine is a liquid and iodine a solid (b.p. = 458 K). The boiling points of noble gases in group 18 also increase from helium (He) to xenon (Xe) as in Table 5.1.
Table 5.1 Molar masses and boiling points of group 17 and 18 of periodic table.
17 (VII-A)
Molecular Mass
Boiling points (K)
18 VIII
Molecular mass
Boiling points (K)
F₂
38
85
He
5.6.1 Factors affecting viscosity
5.6.1 Factors affecting viscosity · Reviewed lesson · version 1 · published 16 Nov 2026
The factors affecting viscosity are as follows:
i.An increase of temperature increases the average kinetic energy of molecules. This allows the molecules to overcome the attractive forces. This lowers the viscosity.
ii.The stronger the intermolecular forces, the greater the viscosity of liquids because liquid molecules cannot move around each other freely, so the resistance to flow increases.
Quick Check 5.5
5.6 Viscosity of liquids
5.6 Viscosity of Liquids · Reviewed lesson · version 1 · published 16 Nov 2026
In order to understand the term viscosity, let us take water in a beaker. It is stirred with a glass rod, and left undisturbed for some time. Its swirling motion subsides after a while. Now, observe this process carefully, you will see that the liquid layer adjacent to the walls of the beaker comes to rest first and layer near the centre stops last. It can be concluded that stationary layer of walls of beaker slows down the motion of layer touching it immediately. This slowed layer in touch with container also slows the next inner layer, but to less extent. This means that a slow moving layer of a liquid tends to slow down the fast moving layer adjacent to it. This is a frictional force operating between adjacent layers. This resistance to the flow of a liquid is termed as viscosity.
In international system (SI), unit of viscosity is in kg m⁻¹ s⁻¹. In CGS system, the unit of viscosity is poise (P).
5.13.2 Uses of liquid crystals in daily life · Reviewed lesson · version 1 · published 16 Nov 2026
The main application area of liquid crystals is in electro-optic devices. These are electrically controlled devices that modulate light in a desired way. Liquid crystals have many uses in daily life.
5.3 Properties of Liquids · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
i.Liquids also diffuse like gases, however the rate of diffusion in liquids is much lower than that in gases.
ii.There are little spaces among liquid molecules because of relatively stronger intermolecular forces.
Figure 5.1: Effect of pressure on the volumes of gases and liquids (original drawing after the textbook's Figure 5.1).
iii.Liquids are 10⁵ times less compressible than gases, but about 10 times more compressible than solids.
iv.The molecules of a liquid are in constant random motion, but their speed of movement is lower than gases. Diffusion among the miscible liquids is an evidence for the free motion of liquid molecules. Similarly, liquids can flow because of the free movement of their molecules.
v.Liquids expands when their temperature is increased. However, this expansion is negligible compare to that in gases.
Factors Affecting Surface Tension · Reviewed lesson · version 1 · published 16 Nov 2026
i)Temperature: Surface tension typically decreases with increasing temperature.
ii)Intermolecular forces: Stronger intermolecular forces lead to higher surface tension.
Table 5.3 Surface tension of some liquids at 20 °C in N m⁻¹
Sr. No.
Liquid
γ (10⁻³ N m⁻¹)
Sr. No.
Liquid
γ (10⁻³ N m⁻¹)
1
Water H₂O
72.75
4
Acetone (CH₃)₂CO
5.4.4 Influence of hydrogen bonding on the properties of water
5.4.4 Influence of Hydrogen Bonding on the Properties of Water · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
i. Structure and low density of ice
The molecules of water have tetrahedral structure. Two lone pairs of electrons on oxygen atom occupy two corners of the tetrahedron. When the temperature of water is decreased and ice is formed, the molecules become more regular and this regularity extends throughout the whole structure. Empty spaces are created in the extensively hydrogen-bonded structure as shown in the following diagram (Figure 5.6). This is why, when water freezes, it occupies 9% more space and its density decreases. For this reason, ice floats on water. Due to this so called anomalous behavior of ice, the fish and other living creatures survive under the frozen lakes and oceans. The ice blanket covers the water surface due to its low density and the water beneath is insulated from the environment.
Figure 5.6: Extensive hydrogen bonding in ice and spaces among molecules (original drawing after the textbook's Figure 5.6).
5.12.1 Crystalline solids
5.12.1 Crystalline Solids · Reviewed lesson · version 1 · published 16 Nov 2026
Crystal Lattice
The regular arrangement of ions, atoms, or molecules in three dimensional space is called the crystall lattice.
The solids which have definite regular and three dimensional geometric shapes are called crystalline solids. For example, diamond, sodium chloride, ice, etc.
5.4.2 Permanent dipole-permanent dipole forces (pd-pd) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 39 KB
Figure 5.3: Permanent dipole-permanent dipole forces in HCl and chloroform (original drawing after the textbook's Figure 5.3).
The force of attraction between the positive end of a polar molecule and the negative end of a nearby polar molecule is called permanent dipole-permanent dipole force. Whenever the HCl molecules are close to each other (as in liquid state), they tend to line up as in Figure 5.3. Similar type of forces is present among the molecules of chloroform (CHCl₃).
The molecule of chloroform has a positive center at the H atom and the negative center on the end with Cl atoms.
5.10 Energetics of Phase Changes · Reviewed lesson · version 1 · published 16 Nov 2026
Whenever, matter undergoes a physical change, it is always accompanied by an energy change. This change in energy is the quantitative measurement of the difference in the strength of intermolecular forces.
ii) Expansion of solids · Reviewed lesson · version 1 · published 16 Nov 2026
The expansion is the property in which spaces between constituent particles are increased. In case of solids the forces of attractions are so strong that increase of temperature hardly affects their relative positions. The particles in a solid have vibrational motions about their mean positions. Increase in temperature of solids hardly increases their volume. No doubt, there are parameters like coefficient of linear and cubic expansions of various solids, but these are negligible as compared to liquids and gases.
5.8 Vapour Pressure · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 28 KB
The molecules of a liquid which leave the open surface are mixed up with air above the liquid. If the vessel is open these molecules go on leaving the surface of liquid. But if we close the system the molecules of liquid start gathering above the surface. These molecules collide with the walls of the container, and also with the surface of the liquid as well. There are chances that these molecules are recaptured by the surface of liquid. This process is called condensation. The two processes, i.e., evaporation and condensation continue till a stage reaches when the rate of evaporation becomes equal to the rate of condensation Fig (5.11).
The pressure exerted by the liquid vapour in equilibrium with its liquid at a given temperature is called vapour pressure.
5.13 Liquid Crystals · Reviewed lesson · version 1 · published 16 Nov 2026
We know that the distinction between liquids and solids is clear-cut. Moreover, the phase transition between them is always sharply defined. However, at certain temperature, many substances exist in a phase that is neither fully liquid nor fully solid. The molecules in these substances can move around, as in viscous liquids, but have a restricted range of motion, as in solids. These substances are called liquid crystals.
In most liquid crystals, the molecules have a rigid, rod-like shape with a length four to eight times greater than their diameter. When packed together, the molecules tend to orient with their long axes roughly parallel, like logs in a stack of firewood. Individual molecules can migrate through the fluid. They can spin around their long axis, but they can’t rotate end over end.
Molar heat of vaporization (ΔHv)
Molar heat of vaporization (ΔHv) · Reviewed lesson · version 1 · published 16 Nov 2026
The amount of heat absorbed by one mole of a liquid to convert it into one mole of vapour at its boiling point at 1 atmospheric pressure is called molar heat of vapourization.
The molar heats of vaportization depends upon the strength of intermolecular forces. When one mole H₂O is converted to vapour at 100 °C, then heat absorbed is 40.6 kJ mol⁻¹.
HX2OX(l)HX2OX(g)ΔHv=40.6kJ mol−1
swipeH₂O(l) → H₂O(g) ΔHv = 40.6 kJ mol⁻¹
Calculation of Relative Molecular Mass (Mᵣ) of a Gas
Calculation of Relative Molecular Mass (Mᵣ) of a Gas · Reviewed lesson · version 1 · published 16 Nov 2026
Equation (4) can be employed to calculate the relative molecular mass of a gas whose P, T, V and mass in grams are known. This is achieved by rearranging equation (4)
Putting n = m/M in equation (4) Where m = mass in g and M = molar mass of the gas
PV=MmRT……(5)
swipePV = mRT/M …… (5)
Molar heat of fusion (ΔHf)
Molar heat of fusion (ΔHf) · Reviewed lesson · version 1 · published 16 Nov 2026
The amount of heat absorbed by one mole of a solid to melt it into the liquid at its melting point at 1 atmospheric pressure is called molar heat of fusion.
HX2OX(s)HX2OX(l)ΔHf=4.6kJ mol−1
swipeH₂O(s) → H₂O(l) ΔHf = 4.6 kJ mol⁻¹
5.2 Ideal gas equation
5.2 Ideal Gas Equation · Reviewed lesson · version 1 · published 16 Nov 2026
It is a matter of common observation that when external conditions of temperature and pressure are changed, the volume of a given quantity of a gas is affected. The gas laws describe the relationships between volume of a given amount of gas and the prevailing conditions of temperature and pressure.
While describing Boyle’s and Charles’ laws, some of the variables are held constant during the changes produced in the gases. According to Boyle’s law.
V∝P1(when n and T are held constant)……(1)
swipeV ∝ 1/P (when ‘n’ and ‘T’ are held constant) …… (1)
A water molecule contains two hydrogen atoms and two lone pairs on oxygen. Therefore, it can form two bonds on average. This is why water molecules are extensively hydrogen bonded with one another. This unique feature of water is responsible for its characteristic properties, e.g. high boiling point of water (100 ℃). The water molecules in liquid form are arranged three dimensionally as shown in Fig. 42. This bonding acts as a bridge between two electronegative oxygen atoms.
On the other hand, ammonia can form only one hydrogen bond per molecule despite having three hydrogen atoms. This is due to the availability of only one lone pair on the N atom as shown in Figure 5.4. The hydrogen bonding in liquid ammonia is much weaker than water. This is why its boiling point is much lower (-33℃). HF is even more distinct than water and ammonia. It has three lone pairs on the F atom which allows it to form three H-bonds. However, it has only one H atom and due to this reason, it is restricted to form only one bond again. Nevertheless, its hydrogen bond is strong enough compared to NH₃, which owes to its high electronegativity. Thus, its b.p (19.9℃) is much higher than ammonia (–33.5℃).
Figure 5.5: Hydrogen bonding in NH3 and HF (original drawing after the textbook's Figure 5.5).
The molecules of HF join with one other in a zig-zag manner in solid form due to the presence of the hydrogen bonds. The exceptional low acidic strength of HF molecule as compared to HCl, HBr and HI is attributed to this strong hydrogen bonding, because the partial positively charged hydrogen is entrapped between two highly electronegative atoms (Figure 5.5).
Three isomers of pentane have the same relative molecular mass (Mᵣ), however, they differ in their surface areas. Straight chain pentane has largest surface area and so is its boiling point among the three isomers of pentane. 2-Methylbutane (Isopentane) has smaller surface area than n-pentane but larger than 2,2-Dimethylpropane (Neopentane). Therefore, the forces among 2-Methylbutane molecules are intermediate and the least strong forces occur in 2,2-Dimethylpropane. The isomers of pentane alone with their boiling points are given in Figure 5.2.
Figure 5.2: The three isomers of pentane have different structures, surface areas and intermolecular forces (original drawing after the textbook's Figure 5.2).
Let us look at the general properties of gases, liquids, and solids. Kinetic molecular theory of gases can help us to understand their properties.
i.Gases do not have a definite shape and volume. The volume of a gas is the volume of the container.
ii.Ideal gases have zero particle volume.
iii.The molecules of gases are widely separated from one another and most of the volume of the gas is empty space (nearly 99.9%). That is why gases can be compressed easily. When sudden expansion of gases occurs cooling takes place. It is called Joule-Thomson effect.
iv.Pressure of a gas is due to the collisions of gas molecules with the walls of the container.
v.There are negligible intermolecular forces in ideal gases.
The shape of a crystal in which it usually grows is called habit of a crystal. If the conditions for growing a crystal are maintained, then the shape of the crystal always remains the same. If the conditions are changed the shape of the crystal may change. For example, a cubic crystal of NaCl becomes needle like when 10% urea is present in its solution as an impurity.
vi.According to kinetic molecular theory, molecules of a liquid are in constant motion, therefore they possess a certain amount of kinetic energy at any temperature. The KE of the molecules may increase or decrease by the rise or fall in temperature respectively. For example, a liquid is converted into a solid by decreasing its kinetic energy (on cooling) and converted into vapour by increasing kinetic energy (on heating)
The magnitude of vapour pressure does not depend upon the amount of liquid in the container or the volume of container. It does not depend on surface area of a liquid. The larger surface area presents a larger target for returning the molecules, so the rate of condensation also increases.
Figure 5.8: Attainment of equilibrium when the evaporation of liquid is carried out in an evacuated closed vessel. (a) Initial state, with evacuated space above the liquid, (b) intermediate state, and (c) equilibrium state, when the rate of evaporation is equal to the rate of condensation.
NH₃ and HCl only need 21.7 and 15.6 kJ mol⁻¹ respectively to become vapour at their boiling points. This difference is due to the stronger intermolecular forces in water.