Lewis view of ionic, covalent and dative bonds and expanded octets, bond polarity and dipole moments from electronegativity, then the three bonding models: VSEPR (AB2-AB6 shapes, drug-design application), valence bond theory with sigma/pi overlap and sp3/sp2/sp hybridization, and molecular orbital theory with MO diagrams and bond orders of He2, N2, O2. Ends with bond energy/length data and a comparison of bond strengths with intermolecular forces.
3.4.1 Formation of Sigma Bond · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.6 MB
A sigma bond is formed by the linear overlap of two half-filled atomic orbitals on adjacent atoms. The orbitals approach each other on the nuclear axis. Both s and p orbitals can overlap head-on to form sigma bonds.
s-s Overlap
The ‘s’ orbital of one atom overlaps with the s-orbital of the other to give a bond orbital. This type of overlap occurs during the formation of the H₂ molecule, where each hydrogen atom has a half-filled ‘s’ orbital. After the bond formation, the electrons are paired up and the electron density in this molecule is symmetrical around the two nuclei as in Figure 3.22.
Figure 3.22: Overlap between s orbitals of two hydrogen atoms to form the H2 molecule (original drawing after the textbook's Figure 3.22).
s-p Overlap
The s orbital of one atom can overlap with the p orbital of the other to form a covalent bond (σ). For example, in HCl molecule, a half-filled s orbital of hydrogen overlaps with a half-filled p orbital of chlorine as shown in Figure 3.23. The electron density is higher close to the Cl atom due to its higher electronegativity value. This is why HCl is a polar molecule.
Figure 3.23: Formation of sigma bond by s-p overlap (original drawing after the textbook's Figure 3.23).
p – p Overlap
An example of this type of overlap is the formation of the Cl₂ molecule where ‘p’ orbitals of two chlorine atoms overlap on the nuclear axis. The electron density is symmetrical around the nuclei of the two Cl atoms because both have same value of electronegativity.
Figure 3.24: Overlap of p and p orbitals to form Cl2 molecule according to VBT (original drawing after the textbook's Figure 3.24).
The H₂S molecule is a non-linear molecule which is formed by the combination of one sulfur and two hydrogen atoms. The two 3p (say 3py and 3pz) orbitals of sulfur containing one electron each can overlap with the 1s orbitals of two hydrogen atoms. A v-shaped molecule is thus formed having a bond angle of 92° as in Fig. 3.25.
Figure 3.25: The formation of H2S molecule by H and S orbitals overlap (original drawing after the textbook's Figure 3.25).
Formation of π bond
Figure 3.26: Formation of double bond (sigma and pi) between oxygen atoms (original drawing after the textbook's Figure 3.26).
Consider the formation of a double covalent bond between oxygen atoms (O=O). There are two unpaired electrons on each atom in perpendicular p orbitals (say px and py). The px orbitals on the two oxygen atoms are oriented in such a way that they overlap end-to-end linearly. The linear overlap of the px orbitals gives a σ bond. However, the py orbitals on both atoms are aligned parallel to each other. They overlap in a parallel way so that the two p lobes overlap above the plane of the nuclei and the other two lobes below the plane as shown in Figure 3.26. This results in the formation of π bond. The oxygen atoms are doubly bonded through σ and π bonds.
b) Sideways Approach · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
When the axes of two p-orbitals (i.e py or pz orbitals) are parallel to each other, they interact to form π molecular orbitals as shown in the diagram Figure 3.35. The bonding molecular orbitals π(2py) or π(2pz) have zero electron density on the nuclear axis (called the nodal plane). On the other hand, anti-bonding molecular orbitals π*(2py) and π*(2pz) have the least electron density in the inter-nuclear region.
Figure 3.35: Formation of sigma and pi MOs from px, py and pz orbitals (original drawing after the textbook's Figure 3.35; the printed caption shows a delta-like symbol for sigma).
3.7 Intermolecular Forces · Reviewed lesson · version 1 · published 16 Nov 2026
Intermolecular forces are also considered as binding forces just like chemical bonds. However, the attraction between the molecules is much weaker than the chemical bonds. These forces are believed to exist between all kinds of atoms and molecules when they are sufficiently close to each other. Such intermolecular forces are called van der Waals forces. These intermolecular forces bring the molecules close together and give particular physical properties to the substances in gaseous, liquid, and solid states.
Three types of such forces are mentioned here:
i)Instantaneous dipole-induced dipole forces or London dispersion forces
ii)Permanent dipole-permanent dipole forces
iii)Hydrogen Bonding
The detailed discussion on these forces will be made in the chapter on states and phases of matter.
3.1 Lewis Concept of Bonding · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 36 KB
3.3.3 Applications of VSEPR Model in Drug Designing
3.3.3 Applications of VSEPR Model in Drug Designing · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
Drug A binds to the receptor; drug B cannot bind to the receptor (original drawing after the lock-and-key scheme printed in the textbook).
Drugs are chemical substances that prevent, diagnose, or treat a disease. Drugs interact with human body at specific points, or with specific processes called targets or substrates, through their bioactive molecules called ligands. A receptor is mostly a protein that receives and responds to a ligand through binding. The examples of targets in the body are receptors, such as enzymes, proteins, nucleic acids, and cellular pathways. Each drug interacts with a specific target in the body to a different degree, this feature is called specificity of a drug or a ligand.
Molecular shape is an important feature that determines how a drug interacts with a biological target. Only the ligands with suitable shape can fit in the active sites of a biological target as a specific key fits in a specific lock. VSEPR model is successfully applied in determining the shapes of various biological systems, such as substrate recognition, ligand specificity or selectivity, and antibody recognition. For example, Aspirin is an analgesic drug (painkiller) used for relief from pain as a primary medicine. It interacts with an enzyme COX (cyclooxygenase) by binding to its active site through the acetyl group (-OCCH₃).
3.2 Electronegativity and the type of bond
3.2 Electronegativity and the Type of Bond · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
The concept of electronegativity has been discussed in detail in chapter 1. Here we will discuss the effect of electronegativity on the type of bonding. The difference in electronegativity of two bonded atoms provides an approximate measure of the bond polarity and an indication of the type of bond. When this difference is very small or zero, the bond is covalent and nonpolar. When it is large, the bond is polar covalent or ionic. The following figure graphically depicts the change in the nature of bond with electronegativity difference. Two atoms having electronegativity difference less than 0.4 are said to make a pure covalent bond. An electronegativity difference between 0.4 and 1.8 corresponds to a polar covalent bond, whereas, above this value the bond between two atoms will be ionic in nature. The electronegativity differences between the atoms in the bonds such as H–H, H–Cl, and NaCl are 0 (nonpolar), 0.9 (polar covalent), and 2.1 (ionic), respectively. This is why H-H bond is purely non-polar, H-Cl a polar covalent bond, whereas NaCl is an ionic compound.
Figure 3.4: Variation of the nature of bond with the electronegativity difference (original drawing after the textbook's Figure 3.4).
Quick Check 3.3
3.3.2 Valence shell electron pair repulsion model (VSEPR)
3.3.2 Valence Shell Electron Pair Repulsion Model (VSEPR) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 1.4 MB
The VSEPR model describes the shapes of molecules based on the electron pairs that surround the central atom. This model was presented by Sidgwick and Powell in 1940. It is based on the assumption that a molecule will take a shape such that the electronic repulsions among the valence electrons of that atom are minimum. In order to have the minimal repulsions, the electron pairs arrange themselves at farthest possible distances. This arrangement of the electron pairs determines the geometry of the resulting molecule.
Postulates:
i.Both the lone pairs (non-bonded) as well as the bond pairs participate in determining the geometries of molecules.
ii.The electron pairs are arranged around the central atom so as to remain at maximum distance apart to avoid repulsions.
iii.The electrons of lone pairs occupy more space than the bond pairs. As a result, the non-bonding electron pairs exert greater repulsive forces on bonding electron pairs and, thus, tend to compress the bond pairs. The magnitude of repulsions between the electron pairs in a given molecule decreases in the following order:
3.1.2 Covalent Bond (electron pair bond) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 73 KB
A covalent bond is formed by the mutual sharing of electrons between two atoms. While sharing electrons, each atom completes its valence shell and attains the nearest noble gas configuration. The bond formation between two Cl atoms is shown below (Fig. 3.2). A covalent bond may be non-polar or polar in character. The bond between two Cl atoms is purely covalent and non-polar. The electronegativity of the two atoms is exactly the same, due to which, the bonded atoms remain electrically neutral and there is no charge on either atom. The other such molecules are H₂, F₂, Br₂ and I₂. Examples of polar covalent bonds are H–Cl, H-Br, H₂O, etc.
Figure 3.2: Formation of a covalent bond between two Cl atoms (original drawing after the textbook's Figure 3.2).
3.5 Atomic orbital hybridization and shapes of molecules
3.5 Atomic Orbital Hybridization and Shapes of Molecules · Reviewed lesson · version 1 · published 16 Nov 2026
A process in which atomic orbitals of slightly different energies and shapes are mixed together to form a new set of equivalent orbitals of same energy and same shape is called hybridization.
3.10 A comparison among ionic, covalent, metallic bonds and intermolecular forces
3.10 A Comparison among Ionic, Covalent, Metallic Bonds and Intermolecular Forces · Reviewed lesson · version 1 · published 16 Nov 2026
Chemical bonds, i.e. ionic, covalent, and metallic bond are usually termed as true chemical bonds, as they affect the chemical properties of a substance. This is because of certain reasons. Firstly, chemical bonds result in the formation of new species through transfer and sharing of electrons. Whereas, intermolecular forces act to bring molecules closer and influence the physical properties. However, such a clear distinction between the chemical bonds and intermolecular forces is not possible. The distinctive feature of the chemical bonds and intermolecular forces is their bond strength. The strength of a force is measured by the bond energy. Table 3.4 provides a comparison among different chemical bonds and intermolecular forces.
Table 3.4 Relative strengths of chemical bonds and intermolecular forces
Bond Type
Bond Energy (kJ mol⁻¹)
Ionic bond in NaCl
760
O-H bond in water
464
Hydrogen bonding
20-50
3.4 Valence bond theory (VBT)
3.4 Valence Bond Theory (VBT) · Reviewed lesson · version 1 · published 16 Nov 2026
The VSEPR model predicts and explains the shapes of molecules but does not give reasons for the formation of bonds. VBT is concerned with both the formation of bonds and the shapes of molecules. This method of describing a covalent bond considers a molecule as a combination of atoms. The postulates of VBT are given below
A covalent bond is formed when half-filled orbitals in the valence shells of two atoms with similar energy overlap.
A greater overlap of the orbitals results in a stronger bond.
Covalent bonds are directional. The direction of the bond is determined by the shape and mode of the overlapping orbitals.
3.5.1 Types of Hybridization · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.5 MB
sp³ Hybridization
In sp³ hybridization, one s-orbital (low energy and spherical) and three p-orbitals (high energy and dumbbell shaped), intermix to give a new set of four orbitals of same energy and same shape. Each of these hybrid orbitals is a sp³ hybrid orbital. These hybrid orbitals are arranged in the tetrahedral geometry as shown in the example of CH₄ as in Fig. 3.27.
The electronic configurations of valence shell of ₆C in its excited and hybridized states are given as follows:
Electron boxes of carbon in the ground, excited and sp3 hybridized states (original drawing after the box diagrams printed in the textbook).
The energies of hybrid orbitals are lower than unhybrid orbitals. Figure 3.27 shows the outermost four atomic orbitals of carbon mix up to give four hybrid orbitals of same energy and same shape.
a) Head on approach
a) Head on approach · Reviewed lesson · version 1 · published 16 Nov 2026
Here, the p-orbitals of the two atoms approach along the same axis (say x-axis) as shown in Figure 3.35. This combination of atomic orbitals gives rise to σ (2px) bonding and σ* (2px) antibonding molecular orbitals.
3.1.1 Ionic Bond · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 89 KB
According to the Lewis theory, the ionic bond is formed by the complete transfer of electrons from an atom with low ionization energy to another atom with high electron affinity. The Na atom (₁₁Na = 2, 8, 1) tends to lose the outermost electron to form Na⁺ (2, 8) ion, which has the electron configuration of ₁₀Ne, a noble gas nearest to it. Chlorine atom Cl (2, 8, 7) gains one electron to form the chloride ion, Cl⁻ (2, 8, 8), also gaining the next noble gas electron arrangement. The oppositely charged Na⁺ and Cl⁻ ions are held together by strong ionic bond in the crystal of NaCl.
A similar type of bond is expected between group 1 and 2 metals and groups 16 and 17 elements.
Figure 3.1: Ionic bond formation between Na and Cl (original drawing after the textbook's Figure 3.1).
3.13 Dative bond (Coordinate Covalent Bond) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Figure 3.3: Dative bond formation (a) oxonium (hydronium) ion, (b) carbon monoxide, (c) ozone molecule (original drawing after the textbook's Figure 3.3).
A dative bond is formed between two atoms when the shared pair of electrons is donated by one of the bonding atoms. Let us consider the example of bond formation between H₂O and a proton (H⁺). H₂O has two covalent bonds and there are two lone pairs of electrons on the oxygen atom. On the other hand, the proton is deficient in electrons. Therefore, the oxygen atom can donate its lone pair of electrons to the acceptor H⁺, and this results in the formation of a dative bond as in the following diagram (Figure 3.3(a)).
Carbon monoxide also contains a dative bond between oxygen and carbon atoms. Oxygen shares its two valence shell electrons with the carbon atom to make a normal double covalent bond. However, the valency of carbon is not satisfied with these bonds. It needs one more pair of electrons to complete its octet. Oxygen atom donates one of its lone pairs for the formation of a covalent bond, which is a dative bond as exhibited in Figure 3.3(b).
The structure of ozone molecule is presented in Figure 3.3(c). It is formed by a reaction between the oxygen molecule with an oxygen atom (a free radical (O)). One of the oxygen atoms in the molecule donates a pair of electrons to make a coordinate covalent bond with this free radical. Therefore, the central atom has total three bonds including a double covalent bond on one side and a coordinate covalent bond on the other. It carries a positive charge, while the oxygen atom that accepts the lone pair carries a negative charge.
Dipole moment and polarity of molecules
Dipole Moment and Polarity of Molecules · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.6 MB
In compounds such as HF, where the bonded atoms are from different elements, the electronic distribution between the atoms is uneven. Due to this reason, one atom carries partial positive and the other negative charge. A molecule with δ⁺ charge on one part and δ⁻ charge on the other part is called a dipole and such a molecule is said to have a dipole moment. It is a quantitative measurement of the polarity of a bond or a molecule. The dipole moments of diatomic molecules like HF, HCl, HBr, HI, NO, etc. are directed from the positive ends (δ⁺) to negative ends (δ⁻) as in Fig. 3.5. Dipole moment is measured in Debye unit (D). Higher dipole moment indicates high polarity in a molecule.
Figure 3.5: Electron density in HF is higher near the F atom and the dipole moment is directed from H to F (original drawing after the textbook's Figure 3.5).
For compounds having more than two atoms, the dipole moment depends on the structure of the molecule. The dipole moment of water is 1.85 D which is directed from the end having two hydrogen atoms to the end with the oxygen atom as in the structure shown in Fig. 3.6. A linear H₂O molecule (H-O-H) would have zero dipole moment. The non-zero dipole moment value shows that water is a non-linear molecule. Experiments reveal that the water molecule has a v-shaped structure. In contrast, SO₂ has a dipole moment of 1.61 D and in opposite direction to that in water. H₂S is also a non-linear molecule as the individual bonds are polar, but they don’t cancel each other’s dipole moment and the overall molecule has some dipole moment.
3.9 Bond energy and bond length
3.9 Bond Energy and Bond Length · Reviewed lesson · version 1 · published 16 Nov 2026
The bond energy is the average amount of energy required to break all bonds of a particular type in one mole of a substance. It is determined experimentally by measuring the heat involved in a chemical reaction and its unit is kJ mol⁻¹. Bond energy is a measure of the strength of a bond and its reactivity. The strength of a bond depends upon the following factors.
Electronegativity difference of bonded atoms
Size of atoms.
The bond energies/enthalpies of some bonds are presented in Table 3.2.
Table 3.2 Average bond energies of some selected bonds in kJ mol⁻¹
Single bonds
Multiple bonds
H-H
3.6 Molecular orbital theory (MOT)
3.6 Molecular Orbital Theory (MOT) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
The molecular orbital approach explains the results of quantum mechanical calculations for covalent bonding. The postulates of this theory are:
During the formation of a molecule, the atomic orbitals of the combining atoms overlap to form new orbitals called ‘molecular orbitals’, which are characteristic of the whole molecule.
The atomic orbitals overlap with the lobe having suitable sign of the wave function of the orbital. For example, one lobe of a p orbital is given the ‘+’ sign and the other is marked with ‘−’ sign.
Two atomic orbitals overlap to form two molecular orbitals. When same sign orbitals overlap, the bonding molecular orbital (σ or π) is formed that has lower energy than the parent atomic orbital, while with opposite signs, high energy anti-bonding molecular orbital (σ* or π*) is formed, that has higher energy than the parent atomic orbitals.
The number of bonds formed between two atoms after the atomic orbitals overlap, is called the bond order and is taken as half of the difference between the number of bonding electrons (say a) and anti-bonding electrons (say b).
Bond order=2a−b
swipeBond order = (a − b)/2
3.1.4 Expanded octet in polyatomic ions
3.1.4 Expanded Octet in Polyatomic Ions · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 65 KB
Lewis structure of the sulfate ion (original drawing after the structure printed beside the text in the textbook).
Polyatomic ions are the ions composed of more than one type of atoms. Their formal charge is the net charge on them which is calculated based on the number of electrons in their valence shells after the formation of bonds. With the exception of ammonium ion (NH₄⁺), these ions mostly carry a negative charge, for example the carbonate (CO₃²⁻), sulfate (SO₄²⁻), and nitrate (NO₃³⁻) ions. In some polyatomic ions, the central atom violates the octet rule by expanding its electron density to the higher orbitals. These are said to have expanded octets. Some prominent examples are SO₄²⁻, ClO₄⁻, PO₄³⁻.
3.6.1 Molecular orbital diagrams of some diatomic molecules and their bond orders
3.6.1 Molecular orbital diagrams of some diatomic molecules and their bond orders · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.4 MB
i) Helium
Figure 3.36: Molecular orbital diagram of He2 molecule (original drawing after the textbook's Figure 3.36).
The electron configuration of He is 1s². For a successful formation of He₂ molecule, 1s orbitals of two He atoms must combine to form bonding (δ1s) and anti-bonding (δ*1s) orbitals as shown in Figure 3.36. Out of four electrons, two enter the bonding molecular orbital δ (1s) and the remaining two occupy the antibonding δ*(1s) molecular orbital. But on calculation we discover that the bond order for He₂ is zero. Hence, He₂ molecule is not formed.
A chemical bond is the force that holds together two or more atoms, molecules or ions. The properties of a substance depend on the type of the chemical bond between its atoms. The term chemical bond includes ionic, covalent, dative, metallic bonds, as well as inter-molecular forces, i.e. van der Waals forces. However, being weak enough, van der Waals forces are usually not termed as pure chemical bonds. In this chapter, we shall discuss the types of bonds in the light of electronegativity and its effect on the nature of bonding, dipole moment, and polarity. Then, the modern bonding theories such as VSEPR, VBT, Hybridization, and MOT will be discussed in detail. The intermolecular forces, i.e. van der Waals forces will also be taken into account. Finally, a comparison of the chemical bonds and intermolecular forces will be presented in terms of bond energies.
NaCl has ionic bond and is solid, but water is a covalent compound and liquid (original drawing after the photographs printed in the textbook).
Lewis concept of bonding gives a simple explanation of the formation of all types of bonds. According to this theory, atoms make bonds to complete their outermost shells to have noble gas-like configuration. This is mostly attained through the formation of an octet in the valence shell.
Figure 3.21: An interaction of Aspirin with COX (original drawing after the textbook's Figure 3.21).
The shape of COX active site and that of acetyl group on Aspirin are compatible with each other as in fig. 3.21. Therefore, the binding is successful to block COX, which is a cause of the pain in the body.
An electron pair shared by two nuclei occupies less space than a lone pair bound by a single nucleus (original drawing after the strip printed above the postulates in the textbook).
iv.The two electron pairs of a double bond and three electron pairs of a triple bond, contain a higher electronic charge density, but they are regarded as single pairs.
v.The presence of highly electronegative atoms with the central atom results in decreased electronic repulsions between the bond pairs, but stronger repulsion by the lone pair.
Predicting the Shapes of Molecules
In order to illustrate this model, the central atom is named ‘A’. The electron pairs around ‘A’ are designated as ‘B’. There may be different number of electron pairs around the central atom depending upon its valency. It gives rise to various types of molecules, such as AB₂, AB₃, AB₄, etc. The electron pair geometry of a molecule is determined by the total number of electron pairs around ‘A’. Whereas, the actual shape of the molecule is determined by the atoms excluding the lone pairs. Following Table (3.1) gives the possible shapes of different types of molecules having varying numbers of bond and lone pairs.
Table 3.1: Geometries and shapes of different systems of covalently bonded compounds
No. of electron pairs around central atom
No. of lone pairs
Electron pair geometry
Shape with respect to atoms
Angular separation of atoms
Examples
2
0
linear
linear
180°
CO₂, BeCl₂
3
0
trigonal
trigonal
120°
BCl₃, SO₃
3
1
trigonal
Angular, v-shaped
Less than 120°
SO₂, SnCl₂
4
0
tetrahedral
tetrahedral
109.5°
CH₄, CCl₄
4
1
tetrahedral
pyramidal
Less than 109.5°
NH₃, H₃O⁺
4
2
tetrahedral
Angular, v-shaped
Less than 109.5°
H₂O, OF₂
5
0
Trigonal bipyramidal
Trigonal bipyramidal
120°, 90°
PCl₅, I₃⁻
6
0
octahedral
octahedral
90°
SF₆
swipe
Steps to Determine the shapes of molecules
The following steps are followed to predict the shape of a molecule.
Electron-dot structure of CCl₄: four bond pairs around C and no lone pair (printed beside the steps, no caption in the book).
The least electronegative atom or the element with the least number of atoms is mostly selected as the central atom. For example, in CCl₄, the carbon atom is the central atom.
The total number of electron pairs around the central atom are counted (including bond pairs and lone pairs). For example in CCl₄, the total number of bond pairs around the C atom are 4 and it has no lone pair.
The total number of electron pairs determines the electron pair geometry (as in the above table) of the molecule. For example, CCl₄ has total four electron pairs and its geometry is tetrahedral.
Finally, the actual shape of the molecule is determined excluding the lone pairs (if any).
AB₂ type Molecules (Linear geometry)
In such molecules, two electrons pairs around the central atom are arranged at an angle of 180° to minimize repulsions between them. Thus, they form a linear geometry as shown in Figure 3.9. BeCl₂ molecule is of AB₂ type with Be as the central atom and two bond pairs around it, but no lone pair.
Figure 3.9: Linear shape of the BeCl2 molecule (original drawing after the textbook's Figure 3.9).
AB₃ type (Trigonal planar geometry)
In AB₃ type molecules, the central atom is surrounded by three electron pairs, which are arranged at maximum distance apart at an angle of 120° giving a trigonal geometry. For example, BF₃ molecule has a trigonal planar shape with each F-B-F bond angle of 120° Figure 3.10. The similar geometries are expected in the hydrides of group 3 (III-A), i.e. AlH₃, GaH₃, BH₃, etc.
Figure 3.10: BF3 is an AB3 system having triangular planar geometry (original drawing after the textbook's Figure 3.10).
In SnCl₂, the Sn atom has 4 electrons in its outermost shell. It makes two bonds with two Cl atoms and the remaining two electrons exist as a lone pair (Figure 3.11 below). One of the corners of the triangle is occupied by this lone pair, giving rise to a distorted trigonal electron pair geometry (in vapour phase). The actual shape of SnCl₂ is v-shaped and bond angle less than 120° due to the presence of a lone pair on Sn atom.
AB₃-Type with Multiple Bonds
Figure 3.12: Shapes of multiply bonded SO2 and SO3 (original drawing after the textbook's Figure 3.12).
The molecule of SO₃ has all the three regions occupied by S=O bonds. The structure of SO₃ is perfectly trigonal with each angle equal to 120°. On the other hand, in SO₂, one corner of the triangle is occupied by a lone pair and the other two corners each by a double bond (S=O). Thus, it makes an angular or v-shaped structure just as SnCl₂ does as in Fig 3.12.
AB₄ Type (Tetrahedral geometry)
In this type of molecules, the charge clouds due to four electron pairs avoid their electrostatic repulsions by being farthest apart to form the shape of a regular tetrahedron. Each of the bond angles is of 109.5°. For instance, each of the four valence electrons of carbon pair up with the sole electron of a hydrogen atom in methane. The four bonded electron pairs are directed from the center towards the corners of a regular tetrahedron, as following Fig 3.13 with each corner representing a hydrogen nucleus. This arrangement permits a non-planar geometry of electron pairs. Each H-C-H bond angle is perfectly 109.5°. On the same grounds, SiH₄, GeH₄, CCl₄ possess the similar shape.
Figure 3.13: Regular tetrahedral shape of the CH4 molecule (original drawing after the textbook's Figure 3.13).
In the ammonia molecule (NH₃), there are three atoms attached to the nitrogen atom having one lone pair. Due to a lone pairs the ideal angle 109.5° is reduced to 107° as in Figure 3.14. This effect compels ammonia to assume a triangular pyramidal shape with reduced bond angles, instead of a tetrahedral. The substitution of hydrogen in NH₃ with electronegative atoms like F or Cl further reduces the bond angles. Take the example of NF₃, which contains three highly electronegative F atoms bonded to the N atom. The bond angles are further compressed to 102.5°. The first reason being the strong polarity of N-F bond, due to which N atom pulls the lone pair closer to its nucleus. This, in turn, exerts a stronger repulsion over bonding electrons. Moreover, the bond pairs (N-F bonds) are closer to F atoms than N atom. The increased distances in these bond pairs make their repulsions weaker and allow the bonds to come closer.
Figure 3.14: Distorted geometry and pyramidal shape of the NH3 molecule (original drawing after the textbook's Figure 3.14).
Experiments reveal that the water molecule (H₂O) is angular or v-shaped, although it has four electron pairs around the central atom. Two of the corners of the tetrahedron are occupied by two lone pairs and the remaining two by bond pairs. But, due to the greater repulsions of the lone pairs, the bond angle is reduced to 104.5° as in Fig 3.15.
Figure 3.15: Water molecule has two lone pairs and is v-shaped with suppressed bond angle (original drawing after the textbook's Figure 3.15).
The VSEPR model also explains the shapes of ions. The hydronium ion [H₃O]⁺ is formed when a water molecule captures a proton. The hydronium ion belongs to AB₄ type with one lone pair and possesses a trigonal pyramidal shape just like the ammonia molecule. The amide ion [NH₂]⁻ is also AB₄ type as it is surrounded by two lone pairs and two bond pairs. Its geometry is tetrahedral, but it has a bent shape (v-shape) similar to the water molecule (Figure 3.16).
Figure 3.16: Shapes of hydronium (H3O+) and amide ions (NH2-) (original drawing after the textbook's Figure 3.16).
Quick Check 3.5
AB₅ type (Trigonal Bipyramid Geometry)
In AB₅ type molecules, repulsions between the five electron pairs can be minimized by an even distribution of electrons among the corners of a trigonal bipyramid. In a trigonal bipyramid, three positions lie along the corners of the planar triangle, whereas, the other two positions lie along an axis perpendicular to the plane. This is evident from the geometry of the PCl₅ molecule given in Figure 3.17. The angles within the plane are 120° and that between the axial atom and a planar atom is 90°.
Figure 3.17: Lewis structure and shape of PCl5 molecule (original drawing after the textbook's Figure 3.17).
Figure 3.18: Shape of tri-iodide ion ([I3]-) (original drawing after the textbook's Figure 3.18).
Just as in the AB₃ and AB₄ types, the presence of lone pairs in AB₅ system also changes the shape and the angles, but the change in this case is more dramatic. Tri-iodide ion [I₃]⁻ is linear, although it is an AB₅ system. The central atom in this ion is the iodine atom. There are five electron pairs around the iodine atom including two bond pairs and three lone pairs. Therefore, it is an AB₅ type molecule with three lone pairs and possesses trigonal bipyramidal geometry. The lone pairs occupy the corners of the trigonal region and the iodine atoms occur on the apices, one being above and the second below the plane. However, excluding the three lone pairs, the actual shape of the tri-iodide ion is linear and the iodine atoms are farthest apart at an angle of 180° as in Figure 3.18.
AB₆ type molecules (Octahedral Geometry)
AB₆ type molecules have 6 electron pairs around the central atom. The repulsions between the electron pairs can be minimized by assuming an octahedral geometry. In this geometry, four electron pairs are at the corners of a planar square and the other two lie along an axis perpendicular to the square. All the ABA angles in this type of geometry are of 90°. The Lewis structure of SF₆ is given in Figure 3.19, it shows that this is an AB₆ type molecule.
Figure 3.19: Lewis structure and octahedral shape of SF6 with each angle of 90 degrees (original drawing after the textbook's Figure 3.19).
XeF₄ is an AB₆ type molecule with four bond pairs and two lone pairs. The two lone pairs remain at farthest distance at angle of 180°. Excluding the lone pairs, the actual shape of XeF₄ is square planar with all F-P-F angles equal to 90°.
Figure 3.20: Lewis structure and square planar shape of XeF4 (original drawing after the textbook's Figure 3.20).
The bond energy of ionic bond (sodium chloride, 760 kJ mol⁻¹) is highest, followed by covalent bond (O-H = 464 kJ mol⁻¹), and average hydrogen bond energy (20-25 kJ mol⁻¹). It shows that the ionic bond is the strongest form of chemical bonding. It also reveals that chemical bonds are generally much stronger than intermolecular forces. The permanent dipole-dipole forces (5-20 kJ mol⁻¹) and London dispersion forces (1-20 kJ mol⁻¹) are even weaker as indicated by their low bond energies.
The metallic bond is mostly elaborated in terms of electrostatic forces, although some theories suggest that it may be of covalent nature. In any case, the metallic bond is weaker than both the ionic and covalent bonds. The average bond energy of the metallic bond is 100-150 kJ mol⁻¹. A satisfactory argument for the low strength of metallic bond is extensive delocalization of electrons within the metallic crystal.
The energy of hybrid orbitals lies between those of the orbitals that mixed: lower than the p orbitals but higher than the s orbital. All the hybrid orbitals of one set have the same energy.
Figure 3.27: Formation of sp3 hybrid orbitals of C in methane (original drawing after the textbook's Figure 3.27).
The four new hybrid orbitals of equal energy have a tetrahedral geometry with carbon nucleus at the center. The methane molecule is formed by the overlap of sp³ hybrid orbitals of carbon with 1s orbitals of four hydrogen atoms separately to form four sigma bonds. The four C-H bonds, which result from sp³-s overlaps, are directed towards the corners of a regular tetrahedron.
sp² Hybridization
In sp² hybridization, one s and two p atomic orbitals of an atom intermix to form three orbitals called sp² hybrid orbitals. The three half-filled sp² hybrid orbitals are arranged in a trigonal planar geometry with bond angles of 120°.
Figure 3.29: Formation of sp2 hybrid orbitals from atomic orbitals (original drawing after the textbook's Figure 3.29).
The sp² hybridization explains the geometry of planar molecules such as BF₃. Electronic configuration of ₅B is:
Electron boxes of boron in the ground, excited and sp2 hybridized states (original drawing after the box diagrams printed in the textbook).
Figure 3.30: Formation of BF3 molecule through sp2-p overlap (original drawing after the textbook's Figure 3.30).
The three outermost orbitals of B mix together to give three sp² hybrid orbitals. On the other hand, one of the p orbitals of fluorine is half filled (e.g. 2pz). BF₃ is formed by the overlap of three half-filled sp² hybrid orbitals of boron with 2pz orbitals of three fluorine atoms. The structure is triangular planar with bond angles equal to 120°, each.
sp Hybridization
In sp hybridization, one s (low energy and spherical) and one p orbital (high energy and dumb-bell shaped), intermix to give a new set of two orbitals of same energy and same shape called sp hybrid orbitals. These sp hybrid orbitals are arranged in linear geometry and oriented at 180°. The electronic configuration of the outermost shell of Be is as follows:
Electron boxes of beryllium in the ground, excited and sp hybridized states (original drawing after the box diagrams printed in the textbook).
The two sp hybrid orbitals lie linearly as in the following diagram Fig. 3.32. The sp hybridization explains the geometry of linear molecules such as beryllium chloride, BeCl₂. It is formed when two sp hybrid orbitals of Be atom overlap with the half-filled p-orbitals of chlorine atoms.
Figure 3.32: Mixing of s and p orbitals to give two hybrid sp orbitals and the formation of BeCl2 (original drawing after the textbook's Figure 3.32).
Figure 3.6: Vector addition of individual bond moments in angular H2O and SO2 molecules (original drawing after the textbook's Figure 3.6).
However, some molecules have zero dipole moments as the symmetry in their structures causes the cancellation of the individual bond moments. For example, BeCl₂ is a linear molecule having two similar Cl atoms on both sides of the central atom at 180°. The individual Be-Cl bond moments are cancelled out as they are opposite in direction and equal in amount. Similarly, CCl₄ has four C-Cl bonds which are expected to have high polarity due to a large electronegativity difference between C and Cl atoms. The bond moments associated to the four C-Cl bonds are directed in such a way that they cancel each other. The net dipole moment of the CCl₄ molecule is zero making it a non-polar molecule. The CCl₄ molecule is perfectly tetrahedral. Similarly, BF₃ has a trigonal planar symmetrical structure and its dipole moment is also zero. As a rule, the molecules that have same ligands (atoms or groups of atoms with the central atom) in a regular geometry, the individual dipole moments may not be zero, but overall molecule has zero dipole moment. Such a molecule is said to be non-polar.
Figure 3.7: The individual bond moments in symmetrical molecules BeCl2, BF3 and CCl4 cancel out to give zero net dipole moment (original drawing after the textbook's Figure 3.7).
Let us consider the role played by electronegativity difference. Look at the bond energies of H-X type of compounds, where X=F, Cl, Br, I. The data show that the bond energy of a bond rises with the increasing electronegativity difference between the bonded atoms. As the difference in electronegativity increases, the bond polarity also becomes greater and this gives rise to additional attractive force for binding the atoms. This is why the bond energy for HF is higher (565 kJ mol⁻¹) than for HI (295 kJ mol⁻¹). It may be noted that energies of multiple bonds are greater than those of single bonds
C≡C>C=C>C−C
swipeC≡C > C=C > C−C
Bond length is the distance between the nuclei of two atoms forming a covalent bond. The bond lengths are experimentally determined by physical techniques, such as electron diffraction, X-ray diffraction, or spectral studies. The bond length of a bond is governed by many factors including electronegativity, size, and the nature of the covalent bond (single, double, or triple). Some selected bond lengths are given in Table 3.3.
Table 3.3 Bond lengths of some selected bonds
Bond
Bond length (pm)
Bond
Bond length (pm)
H-H
74
Si-F
155
H-Br
144
C-F
135
C-C
154
C-Cl
180
C=C
133
C-Br
196
C≡C
120
C-I
214
C=O
122
B-F
130
Si-H
146
B-Cl
175
swipe
With an increase in size of the atoms, the covalent bond length also increases. The C-Cl bond length is about 180 pm, whereas the C-F bond length is 135. This is because the Cl atom is much larger. With the rise in electronegativity difference between the bonded atoms, the bond becomes shortened. For example, Si-F bond length in SiF₄ is found to be near 155 pm, whereas the calculation of Si-F bond from the covalent radii of Si and F (Si=117 pm and F=64 pm) is 181 pm. The electronegativity difference causes an ionic character in the covalent bond. The ionic character results in shortening of the bond length due to the additional attraction between the bonded atoms.
In the formation of H₂ molecule, two s orbitals of H atoms combine to give two molecular orbitals. The bonding molecular orbital is symmetrical about the axis joining the nuclei of the bonded atoms (nuclear axis), while the anti-bonding molecular orbital has the electron density away from the nuclei of the overlapping atoms as in Fig 3.34.
Figure 3.34: Formation of bonding and anti-bonding orbitals for the H2 molecule (original drawing after the textbook's Figure 3.34).
A polyatomic ion needs two or more atoms bonded together, not two types of atom; the atoms may be of the same element, as in I₃⁻ (discussed in this topic) or O₂²⁻. Examples: CO₃²⁻, SO₄²⁻, NH₄⁺.
From the Lewis structures of SO₄²⁻, we can calculate the number of electrons around the central S atom.
The number of electrons in the valence shell of S atom can be calculated as:
No of valence electrons=2×(double bond electrons)+2×(single bond electrons)
swipeNo of valence electrons = 2 × (double bond electrons) + 2 × (single bond electrons)
=2(4)+2(2)=12
swipe= 2(4) + 2(2) = 12
Thus, S has 12 electrons in its valence shell and it exceeds the octet by 4 electrons. The expansion of octet is caused by the involvement of the d orbital in bonding, which can accommodate the extra electrons. The following electronic configuration of native S(0) atom shows that it has two unpaired electrons in the p orbitals. The presence of d-orbital allows this configuration to extend to 4 unpaired electrons by the transfer of one electron from the 3p pair. It explains not only the variable oxidation states of S, but also the possibility of accepting extra electrons in its d orbital.
Electron boxes of sulfur: 3s, 3p and 3d orbitals before and after promotion of electrons (original drawing after the box diagrams printed in the textbook).
In the same way, we can calculate the number of valence electrons around the central iodine atom in the tri-iodide ion. The Lewis structure of the ion is given by:
Lewis structure of the tri-iodide ion, [I3]- (original drawing after the structure printed in the textbook).
The number of valence electrons of the central atom can be calculated as follows,
No of valence electrons=2×(no. of single bond electrons)+2×(no. of lone pairs)
swipeNo of valence electrons = 2 × (no. of single bond electrons) + 2 × (no. of lone pairs)
=2(2)+2(3)=10
swipe= 2(2) + 2(3) = 10
The central iodine atom in tri-iodide ion (I₃⁻) has 10 electrons in the valence shell and the octet expands by two electrons.
Figure 3.37: Molecular orbital diagram of N2 molecule (original drawing after the textbook's Fig 3.37).
Electronic configuration of N is,
7N:1s2,2s2,2px1,2py1,2pz1
swipe₇N: 1s², 2s², 2px¹, 2py¹, 2pz¹
The molecular orbital diagram of N₂ based on this electron configuration is shown in the figure below (Figure. 3.37). The valence shell 2s on both N atoms give σ2s and σ*2s orbitals; whereas, 2p orbitals give six molecular orbitals which are arranged in the increasing order of energy as:
The bond order for N₂ can be calculated from its orbital diagram as:
Bond order of N2=26−0=3
swipeBond order of N₂ = (6 − 0)/2 = 3
Therefore, there are three covalent bonds between the nitrogen atoms in this molecule. One of these is a σ bond while the other two are π bonds. Nitrogen molecule has a triple bond between its atoms.
iii) Oxygen, O₂
The formation of molecular orbitals in oxygen molecule is shown as follows in figure 36.
The bond order of oxygen is 2 ((6 − 2)/2), which shows the presence of one σ and one π bond between the oxygen atoms, i.e. they are linked by a double bond (O=O). Oxygen molecule is paramagnetic in nature, which means it is attracted by a magnetic field. Paramagnetic substances have one or more unpaired electrons in them. A substance with large number of unpaired electrons is strongly paramagnetic. MOT successfully explains the paramagnetic behavior of oxygen molecule.
Liquid oxygen is attracted and gets suspended between the poles of a strong magnet (original drawing after the photograph printed in the textbook).
The MO diagram of oxygen shows the presence of two unpaired electrons, one in π*(2py) and π*(2pz) each. Due to the presence of these unpaired electrons, oxygen molecule has a net magnetic field, which interacts with the external magnetic field.
Figure 3.38: Molecular orbital diagram of O2 molecule (original drawing after the textbook's Figure 3.38).