Basics of Organic ChemistryBasics of Organic Chemistry
Introduces the language of organic chemistry: how carbon's catenation gives hydrocarbons and functional-group families, IUPAC naming, ways to draw molecules and deduce formulas, how bonds break and which reagents attack, the main reaction types/mechanisms, and isomerism including chirality and cis-trans with its pharmaceutical relevance.
19.9.1 Stereoisomerism · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Stereoisomers are further divided into two types.
a)Optical isomers
b)cis-trans isomers
Optical Isomers are the stereoisomers which have identical physical and chemical properties except their ability to rotate the plane polarised light. Such isomers are said to be optically active and this property of these isomers of rotating the plane of polarization is called optical activity. Optical activity of a compound is identified by using plane polarised light (PPL). If the compound rotates the plane of polarised light to right (clockwise), it is called dextrorotatory indicated by symbol (+) and if it rotates the plane to left (anticlockwise), it is called levorotatory indicated by the symbol (-).
Figure 19.4: Optical rotation of PPL (original drawing after the textbook's Figure 19.4).
Optical activity and the structure of a compound
The basic requirement for a compound to be optically active is that it is non-superimposable on its mirror image. This condition is fulfilled by asymmetric/chiral molecules. It can be understood by considering an analogy of our right and left hands, which are non-superimposable as in Figure 19.5. the word 'chiral' is from a Greek word 'Cheir' which means hand. Hence, chirality is also called handedness.
Figure 19.5: Our hands are non-superimposable on their mirror images (original drawing after the textbook's Figure 19.5).
A carbon atom bearing four different atoms or group of atoms is called chiral carbon. Any organic molecule which is not symmetric and it rotates the plane polarised light is a chiral or asymmetric molecule. If a molecule has only one chiral carbon atom, it is always asymmetric and hence optically active. However, if there are more than one chiral atoms, a molecule may or not be asymmetric and optically active.
Enantiomers
If a molecule has only one chiral carbon atom, it is always chiral and hence optically active. For example consider the structure of lactic acid. It has a chiral carbon (indicated by an asterisk) bonded to four different groups, i.e, CH₃, H, OH and COOH.
Lactic acid and its two enantiomers, (-) and (+) lactic acid (original drawing after the textbook's unnumbered figure).
Its three dimensional structure shows that it has two stereoisomers which are non-superimposable mirror image of each other and are called enantiomers ('enantio' means opposite). The enantiomers have identical physical and chemical properties but they rotate the plane of polarised light in opposite directions, with the same extent. One enantiomer is, therefore, dextrorotatory (+) and the other is levorotatory (-). When 50% dextrorotatory and 50% levorotatory enantiomers are present, they form an optically inactive mixture. Such a mixture is called a racemic mixture. A racemic mixture is symbolized by placing symbol (±) in front of the name of the compound. Thus, lactic acid exists in two different optically active forms i.e, (+) lactic acid, (-) lactic acid and an inactive racemic mixture (±).
Meso Isomers
Meso form of tartaric acid (original drawing after the textbook's unnumbered figure).
The stereoisomers which contain at least two similar chiral carbon atoms and also possess a plane of symmetry are optically inactive. The plane of symmetry divides the molecule into two equal halves, one half of the molecule being mirror image of the other half. The two halves will rotate the plane of polarised light in opposite direction. As a result, rotation of one half of molecule is internally compensated (cancelled) by the other half and the molecule will become optically inactive. Such stereo isomers are called meso forms. Tartaric acid is the classic example of this phenomenon.
19.6 Determination of the Molecular Formula · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Let us write the molecular and empirical formulae for the following compounds.
Skeletal formulae of the compounds (a) and (b) (original drawing after the textbook's unnumbered figure).
Steps to find molecular formula
Count the C atoms represented and the heteroatoms shown in the skeleton.
Each line represents a bond and each joint shows a carbon atom. (Double lines represent double bonds). Count one C atom at the end of each line unless another atom is shown there.
Count the number of H atoms necessary to complete the octet of each C atom:
Finding the molecular formula from a skeletal formula (original drawing after the textbook's unnumbered figure).
ii) Suffix
ii) Suffix · Reviewed lesson · version 1 · published 16 Nov 2026
There are two types of suffixes:
a)Primary suffix, also called suffix of stem or root. It indicates whether the parent chain is saturated or unsaturated.
b)Secondary suffix, also called suffix of the key functional group. It gives family name of the compound.
1. Molecular Formula · Reviewed lesson · version 1 · published 16 Nov 2026
“The formula which represents the actual number of atoms of each element present in a molecule of a compound is called molecular formula.”
For example, molecular formula of butane is C₄H₁₀, for acetic acid C₂H₄O₂ and that of ethanol is C₂H₆O. However, molecular formula gives no information about the sequence in which atoms are linked together as well as the nature of a functional group. That is why two different compounds may have the same molecular formula e.g. ethanol and methoxymethane are represented by same molecular formula i.e; C₂H₆O.
A. Breaking of Covalent Bonds · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 35 KB
There are two ways in which covalent bonds can break:
I. Homolytic Fission (Homolysis)
Homolytic fission occurs when the breaking bond is nonpolar. In this type of fission, the two shared electrons in the bond are distributed equally between the two atoms.
Homolytic fission of Cl-Cl and H3C-H (original drawing after the textbook's unnumbered figure).
The dot (.) beside each atom indicates the unpaired electron that the atom has gained from the shared pair in the bond.
“These atoms or groups of atoms with unpaired electrons are called free radicals.”
Free radicals are formed when a nonpolar bond is broken. These free radicals are the reaction intermediates and are highly reactive because of the tendency of their unpaired electrons to be paired.
ii. Heterolytic Fission (Heterolysis)
19.8 Mechanisms of Chemical Reactions
19.8 Mechanisms of Chemical Reactions · Reviewed lesson · version 1 · published 16 Nov 2026
A mechanism is the pathway adapted by a reaction showing the breaking and making of bonds in the substrate leading to the formation of the product. Depending upon the nature of reagents, reaction mechanisms are divided into two main types.
1) Ionic or polar mechanism · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
It involves heterolysis, during which electrophiles and nucleophiles are produced, which may attack polar substrate molecules. The polar mechanism is further divided into the following types.
i) Nucleophilic Substitution Reactions
In this type of reaction, a nucleophile attacks on a saturated electrophilic carbon and substitutes another nucleophile called leaving group e.g.
Nucleophilic substitution: hydroxide ion and bromomethane give methanol through a transition state (original drawing after the textbook's unnumbered figure).
ii) Nucleophilic Addition Reactions
In this type of reactions, a nucleophile attacks on electrophilic carbon of a carbonyl compound to give addition product e.g.
19.4 Nomenclature of Aliphatic Organic Compounds
19.4 Nomenclature of Aliphatic Organic Compounds · Reviewed lesson · version 1 · published 16 Nov 2026
Since, millions of organic compounds are found in nature and hundreds and thousands of new compounds are being synthesized every year, so a need was felt to name these compounds according to their structures. A set of rules was thus formulated by IUPAC (International Union of Pure and Applied Chemistry) for systematic nomenclature of organic compounds. The systematic or IUPAC name of an organic compound is based on the parent hydrocarbon. Each name consists of the components listed below.
2. Empirical Formula · Reviewed lesson · version 1 · published 16 Nov 2026
The formula which represents the smallest whole number ratio of atoms of each element present in a molecule of a compound is called empirical formula. For example, empirical formula of butane (C₄H₁₀) is C₂H₅, and for ethanoic acid (acetic acid, C₂H₄O₂) is CH₂O.
Cis-trans Isomerism · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
The stereoisomers having different spatial arrangement of atoms due to restricted rotation about a double bond in open chain compounds are called cis-trans isomers.
First of all we consider free rotation about C-C single bond in butane.
Two forms (I and II) of butane interconverted by rotation about the C2-C3 single bond (original drawing after the textbook's unnumbered figure).
When the C-C single bond between C-2 and C-3 atoms rotates, the methyl groups also rotate and structure I changes in II and II back into I due to this free rotation.
Now, consider but-2-ene CH₃–CH=CH–CH₃ in which both carbon atoms 2 and 3 are sp² hybridized. The C-C double bond consists of a σ bond formed by the linear overlap of sp² hybrid orbitals and a π bond formed by the parallel overlap of p orbitals. The presence of π bond locks the molecule in one position. The two carbon atoms C-2 and C-3 of the double bond and all the groups attached to them lie in the same plane and their position in space is fixed. For free rotation around the C-C double bond, π bond should be broken first. It requires energy equal to 263 kJ/mol, which is not possible at room temperature. The rotation about C-C double bond is therefore restricted. This restriction of rotation about the C-C double bond is responsible for the cis-trans isomerism (
19.1 Catenation
19.1 Catenation · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 18 KB
i) Stem or Root
i) Stem or Root · Reviewed lesson · version 1 · published 16 Nov 2026
It gives the longest continuous carbon chain including the carbon bearing the functional group. Lowest possible number is given to the carbon bearing the functional group. If the carbon atoms are joined in a ring, the name is started by “cyclo”.
19.10 Stereochemistry in Drug Development · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 49 KB
Figure 19.7: Thalidomide (original drawing after the textbook's Figure 19.7).
In the synthesis of pharmaceutical products chirality is a critical feature to determine safety and efficacy. Because biological system are composed of chiral building block drug receptors which function as highly specific “chiral locks”. Consequently, the two enantiomers of a chiral drug often exhibit vastly different potentials and profiles.
Thalidomide, a tranquilliser was originally distributed as racemic mixture Figure 19.7. It seemed to be a very successful, non-toxic sedative with no known side-effects. In the early 1960s, however, it was discovered that women who had been prescribed the sedative to treat the nausea ('morning sickness') in early pregnancy had produced badly deformed babies. The drug was immediately withdrawn.
Research showed that whilst the (+) isomer was an effective and safe tranquilliser, the (-) isomer was the culprit in damaging the fetus. Originally it was thought that the problem had been due to contamination by the (-) isomer in some production batches, but subsequent research has shown that racemisation of the pure (+) isomer occurs rapidly as soon as it enters the blood stream. Within 10 minutes racemisation is over 50% complete. Thalidomide will never be marketed again, although analogues, that are chirality stable are being, investigated as possible anti-inflammatory drugs.
19.7 Understanding Organic Reactions
19.7 Understanding Organic Reactions · Reviewed lesson · version 1 · published 16 Nov 2026
Since chemical reactions of organic compounds are complex in nature, therefore, in order to have a deep insight into their chemistry, we proceed further by keeping in view the following basic statements:
A.There are two ways in which a covalent bond can break, i.e homolytic and heterolytic
B.There are basically three types of reagents, i.e free radicals electrophiles, and nucleophiles.
C.There are four generally types of organic reactions.
iii) Prefix · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Components of a systematic (IUPAC) name (original drawing after the textbook's unnumbered figure).
It gives the name of the side chain (alkyl group) or any substituent (e.g some functional group like halo, nitro, etc.) along with number of carbon atom to which it is attached.
If prefix is absent, then systematic name will consist of root and suffix.
Examples:
Examples: 4-chlorobutanal and 3-methylbut-2-en-1-ol, split into prefix, stem and suffixes (original drawing after the textbook's unnumbered figure).
19.9 Isomerism
19.9 Isomerism · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Two or more than two compounds which have same molecular formulae but different arrangement of atoms and different properties are called isomers and the phenomenon is called isomerism.
The isomerism of organic compounds stems from the two distinct features.
When same groups or atoms are connected at different places in two or more molecules, it results in structural or constitutional isomerism. This type of isomerism has been discussed earlier in Chemistry 11.
When the substituents or groups have different spatial arrangement in isomers, they are said to have different configuration. This type of isomerism is called stereoisomerism.
Classification of isomers (original drawing after the textbook's unnumbered figure).
19.3 Functional Groups · Reviewed lesson · version 1 · published 16 Nov 2026
An atom or group of atoms or presence of double or triple bond which determines the characteristic properties of an organic compound is called functional group. Both physical and chemical properties of organic compounds are highly affected by the nature of functional groups they possess.
Methanol and ethanol are liquids while methane and ethane are gases. Likewise, m.p and b.p of alcohols are higher than their corresponding alkenes. These properties are due to the presence of the hydroxyl functional group (-OH) in alcohols. The alcohol functional group has the ability to form the hydrogen bonding. Alkanes lack this ability as they have no such functional group in their molecules. Similarly, lower alcohols and carboxylic acids, glucose and sucrose etc., are soluble in polar solvents like water due to their polar functional groups.
The types of organic compounds are dictated by the following factors in their functional groups:
i)Polarity of the bond
ii)Bond order i.e. number of bonds in the functional group
Alkanes and cycloalkanes have no functional group in them as they do not possess any charges or polarity, or double and triple bonds in their structures.
19.2 Hydrocarbons (Compounds of Carbon and Hydrogen Only)
19.2 Hydrocarbons (Compounds of Carbon and Hydrogen Only) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Compounds containing carbon and hydrogen only in their molecules are called hydrocarbons. On the basis of carbon skeleton, hydrocarbons are broadly classified into two types:
a)Hydrocarbons possessing open chain of carbon atoms are called open chain or acyclic hydrocarbons, or more commonly aliphatic hydrocarbons (aleiphatos is a Greek word meaning fat; fats have open chain structure). These can be further subdivided into saturated hydrocarbons (alkanes) or unsaturated hydrocarbons (alkenes and alkynes).
Aliphatic + cyclic: alicyclic (original drawing after the textbook's unnumbered figure).
a)Hydrocarbons possessing rings of carbon atoms are called closed chain or cyclic hydrocarbons. These can be further divided into two types;
(i)Some cyclic hydrocarbons both saturated and unsaturated which behave like aliphatic hydrocarbons, are called alicyclic hydrocarbons e.g, cycloalkanes, cycloalkenes etc.
(ii)
7. Acid halides (CₙH₂ₙ₋₁OX) (–C(=O)–X)
7. Acid halides (CₙH₂ₙ₋₁OX) (–C(=O)–X) · Reviewed lesson · version 1 · published 16 Nov 2026
B) Types of Reagents · Reviewed lesson · version 1 · published 16 Nov 2026
A chemical reaction between two reactants may be regarded as the attack of one species on the other. In this case, the attacking species is called reagent and the species which is undergoing attack is called the substrate.
i. Free Radical
An atom or group of atoms having unpaired electrons are called free radicals e.g. Cl•, H•, •CH₃, CH₃COO• etc.
ii. Electrophile
An atom or group of atoms that is able to accept a pair of electrons to form a new bond is called an electrophile. Electrophiles (electron lovers) are either positive ions (including carbocations) or neutral molecules e.g. CH₃⁺, H⁺, Br⁺, NO₂⁺, SO₃, BF₃, etc.
iii. Nucleophile
An atom or group of atoms that is able to donate a pair of electrons to form a new bond is called nucleophile. Nucleophiles (nucleus lovers) are either negative ions (including carbanions) or neutral molecules e.g. CH₃⁻, Br⁻, OH⁻, CN⁻, NH₃, H₂O, ROH etc.
The terms electrophilic and nucleophilic do not apply only to ions. Many organic compounds are polar; they carry partial charges, which can also make them electrophilic or nucleophilic.
3. Structural Formula · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 96 KB
The structural formula not only shows the number of each kind of atom in the molecule but also the sequence in which atoms are joined together.
There are different types of structural formulae.
(a) Displayed formula (Graphical formula)
This formula is more complete and self-explanatory form of the structural formula.
“The formula which shows all the bonds between different atoms including the type of bonds as well as positions of functional groups in a molecule is called the displayed formula.”
Displayed formulae of butane, ethanol and ethanoic acid (original drawing after the textbook's unnumbered figure).
a) Condensed formula (Linear Formula)
Displayed formula uses a lot of space, it is very often condensed in to a one – line structure called condensed or linear formula. In this kind of formula, single covalent bonds are omitted, however, branches, functional groups, double or triple bonds and separating methylene groups in the middle of the molecule are shown in brackets e.g.
1) Free Radical Mechanism
1) Free Radical Mechanism · Reviewed lesson · version 1 · published 16 Nov 2026
It involves homolysis during which free radicals are produced which attack the substrate molecule e.g.
CHX4+4ClX2Diffused sunlightCClX4+4HCl
swipeCH₄ + 4Cl₂ → [diffused sunlight] CCl₄ + 4HCl
C. Types of Organic Reactions
C. Types of Organic Reactions · Reviewed lesson · version 1 · published 16 Nov 2026
The reactions of organic compounds can be classified into four main types:
i. Substitution Reactions
In substitution reactions, two reactants react in such a way that an atom or group of atoms in one molecule is replaced by another atom or group of atoms. Two products may be formed. For example:
In this type of fission, the two shared electrons in the bond are distributed unequally between the two atoms. One of the atoms keeps both electrons, and it acquires a negative charge. The other atom is deficient in one electron and, thus, acquires a positive charge.
iii. Carbocation Formation
A species which contains a carbon atom with a positive charge is known as carbocation:
Carbocation is formed when carbon is bonded to a heteroatom whose electronegativity is more than carbon e.g; O, N, S, P etc.
Formation of a carbocation from (CH3)3C-Cl (original drawing after the textbook's unnumbered figure).
Nucleophilic addition: cyanide ion adds to ethanal, giving 2-hydroxypropanenitrile (original drawing after the textbook's unnumbered figure).
iii) Electrophilic Addition Reactions
In this type of reaction, an electrophile attacks on an electron rich position (nucleophilic) like carbon-carbon double or triple bond e.g.
Electrophilic addition: ethene and hydrogen bromide give bromoethane (original drawing after the textbook's unnumbered figure).
iv) Elimination Reactions
In this type of reaction, two atoms or groups are removed from two adjacent carbon atoms in molecule. The removal results in the formation of a double or triple bond.
Elimination: hydroxide ion and bromoethane give ethene, water and bromide ion (original drawing after the textbook's unnumbered figure).
Figure 19.6: The two isomers of but-2-ene cannot interconvert by rotation about the C-C double bond without breaking the pi bond (original drawing after the textbook's Figure 19.6).
Cis-but-2-ene and trans-but-2-ene (original drawing after the textbook's unnumbered figure).
Now the above sturctures can be considered as cis-trans isomers and named as follows.
The cis isomer is one in which two similar groups are on the same side of the double bond. The trans isomer is that in which two similar groups are on the opposite side of the double bond. It is important to note that cis-trans isomerism will not be possible, if one of the unsaturated carbon atom is bonded to two identical groups. For example:
but-1-ene and 2,3-dimethylbut-2-ene (original drawing after the textbook's unnumbered structures).
Each of the above two compounds does not show cis-trans isomerism.
“Thus for an open chain compound the necessary and sufficient condition to show cis-trans isomerism is that, it should have double bond in its molecule and that two different groups must be attached to each of the doubly bonded carbon atoms.”
Today, we are familiar with more than 20 million carbon containing compounds. Most of these are studied in organic chemistry, which is defined by IUPAC as, “the study of compounds containing carbon, where carbon is bonded to itself, hydrogen, or other elements excluding some inorganic compounds.”
The examples of traditional inorganic compounds, which are excluded from organic chemistry are carbonates, cyanides (e.g KCl), CO₂, CO, etc. Organic compounds can be easily distinguished from inorganic compounds by their unique properties, such as low m.p’s, b.p’s, low densities and low solubility in water.
The ability of self-linkage between the atoms of the same element is known as catenation (from the Latin: Catena-Chain). Carbon forms long chains and rings through the stable C – C covalent bonds. The self-linking property of carbon atoms has unique importance in organic chemistry.
Tetravalent nature of carbon enables it to have much more different ways of arrangements to give a variety of compounds. For example, with four carbon atoms, there are four different arrangements.
Four different arrangements of four carbon atoms (original drawing after the textbook's unnumbered figure).
Catenation explains why organic compounds are complex, having large structures and vast diversity.
The first printed example numbers a four-carbon chain but names it '4-chloro prop an al'; the stem for four carbons is 'but', so the name is 4-chlorobutanal, as drawn above.
Keeping in view, the above procedure for giving systematic or IUPAC names to various organic compounds, following different classes will be discussed one by one:
Some cyclic hydrocarbons having benzene ring or resembling structures are called aromatic hydrocarbons, e.g., benzene, naphthalene, diphenyl methane etc.
Examples of aliphatic and aromatic hydrocarbons (original drawing after the textbook's unnumbered figure).
Quick Check 19.2
Quick Check 19.2 (a): the compounds to classify, i) to vii) (original drawing after the structures printed in the textbook).
Skeletal formula is the simplified version of displayed formula which can be used to represent more complex organic molecules.
In skeletal formula, all the symbols of carbon and hydrogen atoms as well as the carbon to hydrogen bonds are removed. Bonds between carbon atoms are shown by single lines which meet at an angle. Each carbon is assumed to form enough C – H bonds to make a total of four bonds. Double and triple bonds as well as functional groups are shown in the skeletal formula. For example:
Condensed and skeletal formulae of butane, ethanol, methoxymethane and ethanoic acid (original drawing after the textbook's unnumbered figure).
This reaction proceeds through the free radical mechanim, which was already discussed in Chemistry 11. The reaction involves initiation where initial free radicals are produced. These radicals generate more radicals in the propagation step. Finally, the reaction terminates by combining the free radicals of the same or different types.
In elimination reactions, removal of atoms or groups of atoms from two adjacent atoms in the substrate molecule occurs to form a multiple bond. For example:
In condensation reactions two molecules combine to form a bigger molecule with or without loss of a smaller molecule like H₂O, NH₃, HCl etc. For example,
Loss of electron is called oxidation. Moreover, if a molecule gains oxygen or loses hydrogen or there is increase in number of bonds of carbon with oxygen or increase in oxidation state of carbon, it is oxidized.
Reduction is a reaction where gain of electron, loss of oxygen or gain of hydrogen, or a decrease in the number of bonds of carbon with oxygen or decrease in oxidation state of carbon occurs.