Benzene's delocalised pi system (resonance energy ~152 kJ/mol) makes it stable and prone to electrophilic substitution rather than addition. The unit covers naming of derivatives, mechanisms of halogenation, nitration, Friedel-Crafts alkylation/acylation, orientation (o/p vs m directors), and the few addition/oxidation reactions.
Ortho-Para Directing Groups (Activating Groups) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 77 KB
A group that makes the ring more reactive than benzene and influences the incoming electrophile to attach on -ortho and -para positions only, is called as -ortho, -para director. Substituents direct the reaction to give either the “ortho” (1,2) or “para” (1,4) product, with a slight preference for “para”. In this pattern, ortho- and para– products dominate, and the meta- product is an extremely minor byproduct. Examples of ortho-, para– directors are -SR, -R, -OH, -OR, -NR₂, -SH. Note that these are groups that have the ability to donate electrons to the benzene ring.
The chlorination in the methyl benzene ring takes place in the presence of aluminium chloride (or aluminum bromide if you are using bromine) or iron, and in the absence of UV light. The reactions take place at room temperature. Methyl group is 2,4-directing (o-p directing), which means that incoming groups will tend to go into the 2 or 4 positions on the ring. With chlorine, substitution into the ring gives a mixture of 2-chloromethylbenzene and 4-chloromethylbenzene.
Chlorination of methylbenzene (original drawing after the textbook's unnumbered figure on PDF page 69).
With bromine, you would get the equivalent bromine compounds. Like methyl group on benzene ring, OH group is also ring activator so incoming groups will tend to go into the 2, 4 & 6 positions on the ring.
Kekule structure of benzene · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 71 KB
Kekule structure of benzene (original drawing after the textbook's unnumbered figure on PDF page 60).
This structure explained many properties of benzene successfully.
There were, however, a number of problems with Kekule’s structure in that it didn’t fully explain the physical and chemical properties of benzene.
Bond angles and bond lengths in benzene (original drawing after the textbook's unnumbered figure on PDF page 60).
X-ray studies of benzene exhibits a planar configuration characterized by a regular hexagon comprising six sp² hybridized carbon atoms. As illustrated, each carbon atom is connected to three additional atoms with bond angles of 120° for C–C–C and H–C–C. The length of the C–H bond is 109 pm, while the length of the C–C bond is 139 pm, falling between the single bond lengths of sp³ hybridized carbons (154 pm) and sp² hybridized carbons (133 pm). All C-C and C-H bond lengths are 1.3970 Å and 1.090 Å, respectively.
20.4.2 Side Chain Oxidation in Benzene
20.4.2 Side Chain Oxidation in Benzene · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 91 KB
Oxidation reaction that takes place at an alkyl group directly attached to a benzene ring is termed as side-chain oxidation. In this reaction, alkylbenzenes are readily oxidized by alkaline KMnO₄ or acidic K₂Cr₂O₇ or dilute HNO₃. In these kinds of reaction, the alkyl groups are oxidized to carboxylic acid group, regardless of the size of alkyl group, keeping the benzene ring intact.
Side-chain oxidation of toluene (original drawing after the textbook's unnumbered figure on PDF page 70).
Side-chain oxidation of alkylbenzene takes place when there is at least one benzylic hydrogen attached to the carbon. No reaction occurs in the absence of benzylic hydrogen. Thus, these reactions have no effect on tertiary carbons attached to an aromatic ring.
Whatever the length of an alkyl group may be, it gives only on carboxyl group as a product after oxidation. Following example demonstrates the utilization of oxidation reaction in the production of substituted benzoic acid.
Side-chain oxidation with KMnO4 (original drawing after the textbook's unnumbered figure on PDF page 70).
20.2 Nomenclature of Benzene Derived Compounds
20.2 Nomenclature of Benzene Derived Compounds · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
Aromatic hydrocarbons that contain only one benzene ring in this structure are known as monocyclic aromatic hydrocarbons. We will look into nomenclature of monocyclic aromatic compounds first. There are two styles of naming benzene derivatives. One in which the compound is named with the suffix 'benzene' and one with no benzene (special name).
When a single substituent is present on a benzene, it is a monosubstituted benzene.
Most of the monosubstituted benzenes are named with the base name 'benzene' and using the substituent group as a prefix, such as chlorobenzene, nitrobenzene and methyl benzene.
Many monosubstituted benzenes have common names; some of these names have been included in IUPAC nomenclature as base names for the structure. e.g, phenol, toluene, aniline, etc. Common names in bold face given below are considered to be IUPAC correct base names for structures. The substituent in a monosubstituted benzene is always at C-1, so there is no need to number its location.
Some benzene derivatives have special names, which are accepted as IUPAC names, e.g., benzene carboxylic acid, benzene sulphonic acid, etc.
Common names of monosubstituted benzenes (original drawing after the textbook's unnumbered figure on PDF page 62-63).
20.4 Orientation in Electrophilic Substitution Reactions
20.4 Orientation in Electrophilic Substitution Reactions · Reviewed lesson · version 1 · published 16 Nov 2026
Any group attached with benzene ring affects the electrophilic substitution reaction and determines the orientation of the substitution. There are two ways in which various substituents “direct” electrophilic aromatic substitution of incoming electrophile to benzene ring.
Friedel-Crafts Alkylation and Acylation · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.4 MB
In the Friedel-Crafts acylation reaction, an acyl group is substituted into the benzene ring in the presence of a Lewis acid catalyst. An acyl group is an alkyl group attached to a carbonyl group, R-C=O. In the Friedel-Crafts alkylation, an alkyl group is substituted into the benzene ring.
Friedel-Crafts alkylation and acylation (original drawing after the textbook's unnumbered figure on PDF page 67).
a) Friedel-Crafts Alkylation
The Friedel-Crafts alkylation reaction proceeds via a three-step mechanism.
The Lewis acid catalyst (AlCl₃) undergoes reaction with the alkyl halide, resulting in the formation of a carbocation which acts as an electrophile.
Formation of the carbocation in Friedel-Crafts alkylation (original drawing after the textbook's unnumbered figure on PDF page 67).
Mechanism
Mechanism · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Mechanism of the nitration of benzene (original drawing after the textbook's unnumbered figure on PDF page 66).
Concentrated sulphuric acid acts as a catalyst so is not written in the equations. At higher temperatures there is a greater chance of getting more than one nitro group substituted onto the ring. You will get a certain amount of 1,3-dinitrobenzene formed even at 50°C.
Formation of 1,3-dinitrobenzene (original drawing after the textbook's unnumbered figure on PDF page 67).
Quick Check 20.5
20.1.1 Thermodynamic Stability of Benzene and Resonance
20.1.1 Thermodynamic Stability of Benzene and Resonance · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Benzene like alkenes have double bonds, however it is much more stable than alkenes. Evidence of the increased stability of benzene is obtained by measuring the heat emitted during the hydrogenation of benzene and cyclic alkenes. These heats of hydrogenation can be related to the relative thermodynamic stability of the compounds. This reaction yields cyclohexane as a common product via catalytic addition of hydrogen. In the following diagram, cyclohexane symbolizes a low-energy reference point. Let us analyse the heats of hydrogenation of different cyclohexenes.
Figure 20.1: Energy level diagram of hydrogenation of cyclohexenes and benzene (original drawing after the textbook's Figure 20.1).Describe this diagram
Dashed lines on the right mark 360, 240, 208 and 120 kJ/mol above cyclohexane. As printed, hypothetical cyclohexatriene is at the 360 line, the 1,3-cyclohexadiene and benzene levels are drawn just above the 240 line and cyclohexene between the 240 and 208 lines.
The hydrogenation of cyclohexene results in the formation of cyclohexane and releases 120 kJ mol⁻¹ of energy. From this, we could expect that cyclohexadiene would yield 240 kJ mol⁻¹ on complete hydrogenation, while the hypothetical 1,3,5-cyclohexatriene would produce 360 kJ mol⁻¹ as shown in Figure 20.1. Following this, we must expect that heat of hydrogenation of benzene would be much higher if it were a cyclohexene too. Its heat of hydrogenation would be equal to the hypothetical cyclohexatriene as shown in the above diagram. Benzene, however, has much lower heat of hydrogenation (208 kJ mol⁻¹) exhibiting an exceptional stability. This heat is
20.1 Structure of Benzene
20.1 Structure of Benzene · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Naphthalene, C₁₀H₈, and vanillin, an ice cream flavour (original drawing after the photographs printed in the textbook).
Benzene is one of the most important organic compounds with the chemical formula C₆H₆. It is the simplest aromatic hydrocarbon. Benzene derived products are well known to be
20.1.2 Atomic Orbital Structure of Benzene
20.1.2 Atomic Orbital Structure of Benzene · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
The hexagonal frame work of benzene ring can be conveniently explained by using hybridization approach. According to this, each carbon atom in benzene is sp² hybridized. The three sp² hybrid orbitals on each carbon are utilized to form three σ-bonds, two with adjacent carbon atoms and one with a hydrogen atom. Since all the sp² orbitals are in the same plane, therefore, all the carbon and hydrogen atoms of this σ framework are coplanar at 120°.
The six unhybrid '2p' orbitals, one from each carbon, are perpendicular to this sigma framework and parallel to each other overlap sideways to form a π-electron cloud above and below the plane of the benzene ring making it a conjugated molecule. Due to this overlap six electrons are shared equally among all the six carbons and this is known as delocalization of π electron.
Table: 20.1
Bond
Bond Length
C–C
154 pm
C=C
133 pm
C≡C
120 pm
swipe
20.3 Comparison of Reactivity of Benzene with Alkanes and Alkenes
20.3 Comparison of Reactivity of Benzene with Alkanes and Alkenes · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 60 KB
Alkanes are generally an unreactive class of organic compounds due to their non-polar nature and the presence of sigma bond only. However, they undergo free radical substitution reactions in the presence of UV light quite easily. Alkenes, on the other hand, are very reactive class of organic compounds due to the presence of π bond and the availability of π electrons for electrophilic reagents. They undergo electrophilic addition reactions easily.
Benzene has three π bonds and, as expected, shows some similarities to alkenes in being reactive towards electrophilic species. However, there are two key differences between their reactions with electrophiles:
benzene is very stable and thus less reactive.
Unlike alkenes, it undergoes the electrophilic substitution and not electrophilic addition reactions:
Electrophilic substitution of benzene and electrophilic addition to cyclohexene (original drawing after the textbook's unnumbered figure on PDF page 64).
20.3.1 Electrophilic Aromatic Substitution
20.3.1 Electrophilic Aromatic Substitution · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Regardless of electrophile used, the electrophilic aromatic substitution mechanism can be divided into three main steps.
i.Generation of electrophile: The first step of an electrophilic substitution reaction involves the generation of an electrophile. The electrophile can be a positive ion or the positive end of a polar molecule. Typically, electrophiles cannot simply be added to the reaction mixture. The electrophile is produced in situ, by adding appropriate reagents to the reaction mixture.
ii.Electrophilic attack: In the second step the π electrons of benzene attack the electrophile. This forms a sigma bond between one carbon atom of the benzene ring and the electrophile. This disrupts the aromaticity in the ring as there are now only four π electrons and there is a positive charge spread over the five carbon atoms. Because of the new sigma bond formed, this intermediate is called a sigma complex.
iii.Restoration of aromaticity: In the 3rd step, the hydrogen on the sp³-hybridized carbon is removed by a counterion/conjugate base restoring the aromaticity to the ring. This happens by heterolytic cleavage of the C-H bond. This means that the electrons in this bond go into the benzene π bonding system, and the d-localisation in the ring is restored
Meta Directing (Deactivating) Groups
Meta Directing (Deactivating) Groups · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 27 KB
Chlorination of nitrobenzene (original drawing after the textbook's unnumbered figure on PDF page 69).
Group that makes the ring less reactive than benzene, and directs the incoming electrophile to attack on meta position only is called as-meta director. Such groups are mostly electron-withdrawing groups, that destabilize the arenium intermediate. These substituents direct the reaction to give primarily the “meta” (1,3) product.
Major product formed in this case is meta substituted. Examples of meta– directors include -CN, C=O, -NO₂, -CO₂-. Nitrobenzene contains a meta directing group (-NO₂), its chlorination occurs at the meta position.
Quick Check 20.7
20.4.3 Addition Reactions of Benzene
20.4.3 Addition Reactions of Benzene · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
We will examine hydrogenation and halogenation addition reactions of benzene in the following reactions.
a) Hydrogenation of benzene
The hydrogenation of benzene and other arenes, involves the addition of 1, 2, or 3 moles of hydrogen to the carbons of benzene. Cyclohexane is produced when benzene is completely hydrogenated. Cyclohexane is a useful solvent and a precursor in the production of other chemicals.
Hydrogenation of benzene and methylbenzene (original drawing after the textbook's unnumbered figure on PDF page 70).
These reactions destroy the electron delocalisation in the original benzene ring, because those electrons are being used to form bonds with the new hydrogen atoms. Although the reactions are exothermic overall because of the strength of all the new carbon-hydrogen bonds, there is a high activation barrier to the reaction. The reactions are done using the same finely divided nickel catalyst that is used in hydrogenation of alkenes and at similar temperatures (around 150°C), but a higher pressure is applied.
b) Addition of Halogens
Chlorine and bromine react in the same way. In the absence of a catalyst, UV light and heat are sufficient for complete halogenation. The complete chlorination of benzene is shown below:
20.4.1 Combustion
20.4.1 Combustion · Reviewed lesson · version 1 · published 16 Nov 2026
When benzene is burnt in excess of air, it is completely oxidized to CO₂ and H₂O. However, this reaction gives a smoky flame which is used as a test for aromatic compounds.
Both alkane and benzene are very stable and insusceptible to oxidation but when put together, the benzylic carbon which is directly attached to the benzene ring becomes more reactive and more susceptible to oxidation.
Oxidation of alkylbenzene containing benzylic protons by KMnO₄ is used an identification test. Purple colour of KMnO₄ solution is discharged, once consumed in the oxidation reaction. Therefore, one can easily differentiate between benzene, benzene containing primary, secondary, and tertiary alkyl groups by chemical test with KMnO₄ solution.
Disubstituted benzenes are compounds when two substituents are present on the benzene ring. They are named according to the following rules.
The carbon to which a higher priority substituent is attached is C₁. Others are numbered accordingly. The order of priority of substituents (left to right) is: -COOH, -CN, -CHO, -COCH₃, -OH, -NH₂, -OR, -R
If both substituents are the same priority then the carbon having a substituent lower in alphabets is designated as C₁.
The following examples explain how the disubstituted benzenes are named.
Names of disubstituted benzenes (original drawing after the textbook's unnumbered figure on PDF page 63).
Ortho, meta and para positions of benzene (original drawing after the textbook's unnumbered figure on PDF page 63).
Aromatic hydrocarbons that contain two or more benzene rings in their molecules are known as polycyclic aromatic hydrocarbons.
Example of polycyclic benzenes (original drawing after the textbook's unnumbered figure on PDF page 63).Describe this diagram
In polycyclic arenes neighbouring rings share a C-C edge. Anthracene and phenanthrene have the same formula, C14H10, but their rings are joined differently: in a line and at an angle.
Quick Check 20.2
The arenes of Quick Check 20.2 (original drawing after the textbook's unnumbered figure on PDF page 64).
The π electrons of aromatic ring attack on electrophilic carbocation, forming an arenium ion as an intermediate. The aromaticity of the arene is temporarily lost due to the breakage of the carbon-carbon double bond.
The deprotonation of the intermediate leads to the reformation of the carbon-carbon double bond, restoring aromaticity to the compound. This proton goes on to form hydrochloric acid, regenerating the AlCl₃ catalyst.
Mechanism of Friedel-Crafts alkylation (original drawing after the textbook's unnumbered figure on PDF page 68).
b) Friedel-Crafts Acylation
Friedel-Crafts acylations proceed through a four-step mechanism.
A reaction occurs between the Lewis acid catalyst (AlCl₃) and the acyl halide. A complex is formed and the acyl halide loses a halide ion, forming an acylium ion.
Formation of the acylium ion in Friedel-Crafts acylation (original drawing after the textbook's unnumbered figure on PDF page 68).
An electrophilic attack of π electrons of the aromatic ring on the acylium ion (RCO⁺) takes place.
The intermediate complex is now deprotonated, restoring the aromaticity to the ring. This proton attaches itself to a chloride ion, forming HCl. The AlCl₃ catalyst is regenerated. Thus, the required acyl benzene product is obtained via the Friedel-Crafts acylation reaction.
Mechanism of Friedel-Crafts acylation (original drawing after the textbook's unnumbered figure on PDF page 68).
lower than expected. It shows benzene is much more stable than the hypothetical cyclohexatriene.
This stability is explained based on the delocalisation of π electrons. According to the modern concept, all the benzene π electrons are delocalised over the ring through the π orbital overlap on all the six carbon atoms. The actual heat of hydrogenation of benzene is 152 kJ mol⁻¹ lower than the theoretical value. This energy is called the resonance energy (delocalisation energy) of benzene. This concept of delocalisation is explained in the next topic (20.1.2).
. For this reason, organic compounds containing benzene rings were classified as being
“aromatic”
(sweet smelling)
amongst scientists in the early 19th century. Many aromatic compounds are
sweet/pleasant smelling
, such as
vanilla
. Organic hydrocarbons containing one or more benzene rings are known as
arenes
. However, the term
'aromatic'
continues to be used today in order to designate molecules with benzene and benzene-like rings in their structures that are not good-smelling, rather have foul smells.
After the discovery of benzene, its molecular formula was found to be C₆H₆. Following this, many scientists attempted to figure out its structure. Some scientists presented linear structures. But, these were soon rejected as they could not explain the properties of benzene.
The structure of benzene remained a mystery until 1865 when a German professor August Kekule elucidated it as a six membered cyclic compound having alternate single and double bonds as below.
This delocalization causes all the six C - C bond lengths to be same (139 pm). Benzene is thus represented as a hexagon with a circle inscribed, where the circle represents delocalized π electrons.
Figure 20.1: (a) sigma-framework (b) pi-bond formation (c) delocalized pi-bond (original drawing after the textbook's second Figure 20.1).
Bromine in the electrophilic substitution reaction replaces a hydrogen atom. This is due to the stability of the aromatic ring which is due to extensive delocalization of π electrons. Even though the reaction in benzene goes through an intermediate where the aromaticity is broken, it is restored after the completion of the reaction. Therefore, electrophilic substitution does not affect the overall stability of the benzene ring. In electrophilic addition the delocalisation is broken and addition is not favourable.
General mechanism of electrophilic substitution (original drawing after the textbook's unnumbered figure on PDF page 65).
Examples of electrophilic substitution reactions of arenes are given as follows.
Halogenation of Benzene
Benzene only reacts with bromine and chlorine in the presence of Lewis acids as they coordinate to the halogens and generate strong electrophilic species.
Bromination of benzene (original drawing after the textbook's unnumbered figure on PDF page 65).
The Lewis acids are usually aluminum chloride (AlCl₃), iron chloride (FeCl₃) or iron bromide (FeBr₃).
This is bromination of benzene, which involves following steps:
Formation of the electrophile Br+ from Br2 and AlBr3 (original drawing after the textbook's unnumbered figure on PDF page 65).
Attack of Br+ and loss of the proton in the bromination of benzene (original drawing after the textbook's unnumbered figure on PDF page 65-66).
Once the electrophile is formed, it follows the same general mechanism as we have discussed earlier.
First, the addition of the electrophile, forming the sigma complex which is then deprotonated by AlCl₄⁻
In the same way, FeCl₃ is used as the Lewis acid activator for generating Cl⁺. The rest of the mechanism is identical to what we saw for the bromination of benzene.
Quick Check 20.4
Nitration of Benzene
Nitro group is introduced on benzene, using mixture of conc. HNO₃ and conc. H₂SO₄. The mechanism involves the following steps:
Nitration of benzene (original drawing after the textbook's unnumbered figure on PDF page 66).
The electrophile NO₂⁺ ion is generated by reacting concentrated nitric acid (HNO₃) and concentrated sulphuric acid (H₂SO₄).
A pair of electrons from the benzene ring is donated to the NO₂⁺ electrophile to form a covalent bond causing a loss in aromaticity
The C–H bond of the substituted carbon atom breaks and the electrons go back into the benzene π bonding system, restoring its aromaticity