Environmental chemistry of the atmosphere: composition and temperature-defined layers with stratospheric ozone chemistry, classification and sources of air pollutants (oxides of C, N, S, hydrocarbons, ozone, CFCs, PAHs, POPs, VOCs, PM, heavy metals), smog, acid rain and the greenhouse effect, the Air Quality Index and health effects, monitoring methods, control technologies (catalytic converter, DPF, SCR, scrubbers) and Pakistani air-quality laws with socio-economic issues.
14.4.4 Hydrocarbons · Reviewed lesson · version 1 · published 16 Nov 2026
Hydrocarbons are produced naturally in various environmental processes like vegetation, wildfire, volcanoes, and seeps. Anthropogenic activities like incomplete burning of fossil fuels, oil spills, industrial and vehicle emission are sources of hydrocarbons. Automobiles are the major source of hydrocarbon emission. Methane is the most common hydrocarbon and air pollutant.
14.8.1 Factors Affecting Air Quality · Reviewed lesson · version 1 · published 16 Nov 2026
Air quality is influenced by several key factors or sources.
i) Emission sources
Burning of wood and fossil fuels can increase local pollution level. Factories and power plants use fossil fuels that release dangerous pollutants in air like SOₓ and NOₓ. Vehicles release CO, PM and VOCs.
ii) Meteorological conditions
Wind, temperature, and humidity affect pollutant dispersion and concentration. A layer of warm air trapping pollutants near the ground can lead to poor air quality.
iv) Natural Events
Wild fires can release large amounts of smoke and PM into the atmosphere. Natural dust storms can significantly lower air quality.
v) Seasonal Changes
Temperature variations, such as heating or cooling of buildings in different seasons can increase emissions of pollutants. Seasonal pollen concentration can contribute to poor air quality.
Table 14.2 AQI and level of health concern
Air Quality Index (AQI) Values
14.16.1 Economic Issues
14.16.1 Economic Issues · Reviewed lesson · version 1 · published 16 Nov 2026
Poor air quality can reduce worker productivity due to illness and absenteeism.
Air pollution and air quality can damage crops reducing agricultural yield and increasing food prices.
Air pollution leading to acid rain can degrade buildings, bridges and other infrastructure.
iii) Selective catalytic reduction (SCR) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
SCR is used in diesel engines to remove pollutants from the emission gases. It reduces NOₓ to N₂ and oxidizes CO and hydrocarbons to CO₂ and water vapour using catalysts, such as TiO₂, zeolites, etc.
Figure 14.6: Selective Catalytic Reduction (original drawing after the textbook's Figure 14.6).
14.16.3 Political Issues · Reviewed lesson · version 1 · published 16 Nov 2026
Implementing effective air quality regulations can be challenging due to political and economic interests.
Air pollution is not confined to borders and effective management requires international corporation.
Implementing air quality regulations requires strict governance, which might slow down industrial growth and economic development and leads to political conflicts.
Addressing air pollution requires a multi-faceted approach, balancing socio-economic, and technological considerations.
14.4.8 Persistent Organic Pollutants (POPs) · Reviewed lesson · version 1 · published 16 Nov 2026
These are organic compounds that are resistant to degradation through chemical, biological and photolytic processes. These are toxic and adversely affect human health and the environment, traveled by wind and water. Most POPs are generated in one country can affect people and wildlife far from where they are used and released.
Owing to their persistence, they accumulate in the environment and can have significant adverse effects on human health. Some POPs are given in Table 14.1 below:
Table 14.1 Some POPs with their uses
Names of POPs
Uses
Polychlorinated Biphenyls (PCBs)
Used in electrical equipment, surface coating ink, adhesives and paints
Dichlorobiphenyl tri-chloroethane (DDT)
Used as an insecticide in agriculture
swipe
iii) Mesosphere
iii) Mesosphere · Reviewed lesson · version 1 · published 16 Nov 2026
It extends to a height of about 50 – 85 km from the ground. Here, the temperature decreases with altitude from -2 °C to -93 °C. The coldest region of the atmosphere is located in this layer.
14.13 Analyze Data and Interpret Air Quality · Reviewed lesson · version 1 · published 16 Nov 2026
The collected data is analyzed to confirm the truth or falseness of the hypothesis. The results of the analysis are interpreted and concluded.
Analyzing and interpreting air quality data involves understanding the concentration of various pollutants, identifying trends overtime and assessing the implications for public health and environmental Policy. General approach to analyze and interpret air quality measurements and trends are follows.
By carefully designing experiments, collecting and analyzing data, a hypothesis about air quality can be tested and the strategies for improving air quality can be made.
14.5 Impact of Human Activities on the Atmosphere · Reviewed lesson · version 1 · published 16 Nov 2026
Human activities have significant impact on the atmosphere, primarily through the burning fossil fuels and deforestation. These activities contribute to climate change, air pollution, poor air quality and other environmental issues.
In urban areas, most air pollution comes from human-made sources. Such sources can be classified as either mobile (cars, trucks, air planes, marine engines) or point sources (factories, electric power plants etc.)
14.10 Potential health risk associated with air pollution
14.10 Potential Health Risk Associated with Air Pollution · Reviewed lesson · version 1 · published 16 Nov 2026
Air pollution poses significant health risks to humans. The potential health effects can be acute or chronic and vary depending on the type and concentration of pollutants, duration of exposure and individual weakness.
14.3.2 Human-made sources · Reviewed lesson · version 1 · published 16 Nov 2026
Such sources can be classified as either mobile (cars, trucks, air planes, marine engines) or point sources (factories, electric power plants etc.). The combustion of fossil fuels (coal, fuel oils, and natural gas) in vehicle engines, factories and power plants produce carbon dioxide (CO₂) carbon-monoxide (CO), and hydrocarbons (CH₄). The burning of wood as a domestic fuel and coal in brick kilns are also the sources of air pollutants.
ii) Designing the experiment · Reviewed lesson · version 1 · published 16 Nov 2026
The detail of the experiment including the variables and method of data collection is planned. Busy roads sites and residential areas are selected for monitoring.
14.8 Air Quality · Reviewed lesson · version 1 · published 16 Nov 2026
Air quality is measured in terms of Air Quality Index (AQI). AQI is a measure of the concentrations of pollutants present in the air at a particular location. When the air quality is good, the air is clear and contains only small amount of solid particles and chemical pollutants. Poor air quality, which contain high level is often hazy and dangerous to health and the environment.
An AQI value under 50 is considered good in quality. This means, it is safe for you to spend time outdoor without posing a risk to your health. An AQI over 300 is considered hazardous. Children under 18, adult over 65, people with chronic heart, and lung diseases are under high-risk. Outdoor workers are at higher risk because of the prolonged exposure.
14.4.5 Low-Altitude Ozone (O3) · Reviewed lesson · version 1 · published 16 Nov 2026
Ozone is a powerful oxidizing agent. It is non-toxic in small concentrations, but above 100 parts per million (ppm), it is toxic. It is harmful to humans, plants and other materials i.e., rubber, fabric dyes, and durability and appearance of paints.
14.4.10 Particulate Matter (PM) · Reviewed lesson · version 1 · published 16 Nov 2026
Particulate matter (PM) is all the dust, smoke, and haze particles suspended in ambient air. Particulate matter (PM) comprises acids, organic chemicals, metals, and soil or dust particles. Sources of PM are both natural and anthropogenic. Natural sources include volcanoes, fires, dust storms, and aerosolized sea salt. Man-made sources of particulate matter PM include combustion in mechanical and industrial processes, vehicle emissions, and tobacco smoke.
i) Hypothesis · Reviewed lesson · version 1 · published 16 Nov 2026
As a first step, a hypothesis is developed to design an experiment. For example, the hypothesis, “The concentration of airborne particulate matters (PM 2.5) and nitrogen dioxide (NO₂) in urban areas is higher during peak traffic hours as compared to non-peak hours” can be tested by collecting air quality data at different time of the day.
14.4.3 Oxides of Sulphur (SOx) · Reviewed lesson · version 1 · published 16 Nov 2026
There are two oxides of sulphur i.e., sulphur dioxide (SO₂) and sulphur trioxide (SO₃) which are collectively called SOₓ. These gases are emitted primarily by burning coal and oil. When SOₓ combine water vapour, it causes acid rain that damages ecosystem. SO₂ is the major source of acid deposition in the air.
14.15.2 Measures to Control Air Pollutions · Reviewed lesson · version 1 · published 16 Nov 2026
i.Vehicle Emission Standard: Enforcement of this standard is to reduce pollution from motor vehicles. The promotion of cleaner fuels such as compressed natural gas (CNG), liquid petroleum gas (LPG) and sticker regulation on fuel quality.
ii.Industrial Emission Control: To reduce emission from industrial resources and the encouragement of industries to adopt cleaner production techniques and pollution control technologies.
iii.Public Awareness Campaigns: Educating the public about the sources and effect of air pollution and ways to reduce personal contributions to air pollution also promote the use of public transport carpooling and non-motorized transport such as cycling and walking.
iv.Urban Planning and Green Infrastructure: Development of green belts and parks in urban / areas to improve air quality. Implementation of urban planning measures to reduce traffic congestion and promote sustainable transport options.
v.Smog Control Measures: Specific measures to control smog particularly during the winter months when air quality deteriorates significantly, Restrictions the burning of crop residues, which is a major contributes to smog and should use smog towers and other technologies to reduce particulates matter in the air.
vi.
iii) Data Collection
iii) Data Collection · Reviewed lesson · version 1 · published 16 Nov 2026
The data on traffic volume during rush hours and non-rush hours is collected and finally compared. The reliable instruments and methods to collect air quality data are used.
14.6.1 Formation of Smog · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.4 MB
Figure 14.3: Smog around Lahore Fort (original drawing after the textbook's Figure 14.3).
Smog is a type of air pollution typically characterized by a thick haze. It primarily occurs in urban areas and is often caused by emissions from vehicle, industrial activities and other sources of pollution. It consists of fine dust or soot particles, condensed water vapor, poisonous gases like SO₂, NOₓ, O₃, CO and CO₂, secondary pollutants like O₃, unburned hydrocarbons, VOCs and PM 10-2.5 micron.
Types of Smog
i)Industrial or Classical Smog (London Smog)
ii)Photochemical smog (Los Angeles Smog)
i) Classical or Sulphurous Smog
Sulfurous or Industrial smog also called as “Reducing smog or Classical Smog” usually results from high quantities of sulfur oxides (SOₓ) being released into the air. It is also called London smog.
14.7 Greenhouse effect and global warming
14.7 Greenhouse Effect and Global Warming · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
Global warming refers to the long-term rise in the Earth’s average surface temperature due to human activities, primarily the emission of greenhouse gases (GHGs) released by burning fossil fuels.
Figure 14.5: Mechanism of Global Warming (original drawing after the textbook's Figure 14.5).
It is a global scale problem of air pollution. Carbon dioxide and water vapour in the atmosphere transmit short wavelength solar radiations but reflect back the longer wavelength heat radiation coming from warmed surface of the earth.
ii) Diesel Particulate Filter (DPF)
ii) Diesel Particulate Filter (DPF) · Reviewed lesson · version 1 · published 16 Nov 2026
Diesel particulate filter (DPF) is incorporated in modern diesel engines to reduce the emission of harmful particulate matter (PM) from the exhaust gases. The primary function of diesel particulate filter is to capture and store soot particles from the exhaust gases.
i) Troposphere · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.8 MB
Figure 14.1: Layers of the atmosphere (original drawing after the textbook's Figure 14.1).
It is the lowest region of the atmosphere which extends up to 12 km. It includes all the major gases present in the atmosphere i.e., nitrogen, oxygen, and carbon-dioxide, etc. In this region, temperature decreases from 17 °C to -58 °C regularly. It is the densest layer of the atmosphere. It is the layer in which major events such as rain, lightning, and hurricanes occur.
14.16.2 Social Issues · Reviewed lesson · version 1 · published 16 Nov 2026
Vulnerable populations, such as children, the elderly, and low-income communities are disproportionately affected by air pollution.
Chronic exposure to polluted air reduces the overall quality of life. This affects social well-being and community health.
Severe air pollution can force people to migrate from the unhealthy polluted areas to places with better air quality, leading to social displacement and associated challenges.
14.11 Methods & techniques to measure & monitor air quality
14.11 Methods & Techniques to Measure & Monitor Air Quality · Reviewed lesson · version 1 · published 16 Nov 2026
Measuring and monitoring air quality involves a combination of methods and techniques to assess the concentration of various pollutants in the air. These pollutants can include particulates matter (PM), nitrogen dioxides (NO₂), sulphur dioxide (SO₂), carbon monoxide (CO), ozone (O₃) and volatile organic compounds (VOCs). There are various methods are techniques used by environmental engineers to measure air quality accurately.
The instrument used to measure air quality index (AQI) is nephelometer. This is an instrument used to monitor PM such as dust, smoke, mist and fumes. Nephelometer, also known as photometer, detects particles by measuring the total amount of light they scatter.
14.9.1 Major air pollutants and their health effects
14.9.1 Major Air Pollutants and their Health Effects · Reviewed lesson · version 1 · published 16 Nov 2026
i) Particulate matter (PM)
Particular matter (PM) consists of tiny particles suspended in the air, including dust, dirt, soot and smoke ranging from diameter of 2.5 micrometer to 10.0 micrometer. Inhalation of these particulate matter (PM) can cause inflammation and irritation of airways, leading to conditions such as asthma and bronchitis.
ii) Nitrogen Dioxide (NO₂) and Sulphur Dioxide (SO₂)
The short-term exposures of NO₂ and SO₂ can irritate the respiratory system, while long-term exposure can increase the risk of respiratory infection, asthma and bronchitis.
i) Catalytic convertor (CC) · Reviewed lesson · version 1 · published 16 Nov 2026
Oxides of nitrogen and other undesirable gases such as CO and various unburnt hydrocarbon are emitted by the vehicle engines. The most cars are equipped with catalytic convertors to convert the harmful pollutants to harmless substances. CO is oxidized to CO₂. NOₓ are reduced to N₂. The unburnt hydrocarbon is converted to CO₂ and H₂O.
14.3.1 Natural sources · Reviewed lesson · version 1 · published 16 Nov 2026
Naturally occurring particulate matter (PM) include dust from earth’s surface, and biological materials in the form of pollens, spores and animal debris. Volcanic eruptions can introduce very large quantities of gases and particulate matter (PM) into the atmosphere. Thunderbolt produces significant quantities of oxides of nitrogen (NOₓ).
Other natural sources of air pollution are algae on the surface of the oceans, which gives out hydrogen sulphide (H₂S), wind erosion which introduces PM, and humid zones such as swamps, peat-bags or little deep lakes, which produce methane (CH₄).
Introduction : major, minor, trace components · Reviewed lesson · version 1 · published 16 Nov 2026
The atmosphere is a sphere of different gases around the earth. The component of the atmospheres may be divided into major, minor and trace components.
iv) Scrubbers
iv) Scrubbers · Reviewed lesson · version 1 · published 16 Nov 2026
Scrubbers can be used to control wide range of pollutants including particulate matters, SO₂, HCl, NH₃ and VOCs. Scrubbers use liquids (e.g. H₂O) to remove pollutants such as SO₂, PM from the industrial exhaust gases.
14.12 Experiments and data collection to test hypothesis about air quality
14.12 Experiments and Data Collection to Test Hypothesis about Air Quality · Reviewed lesson · version 1 · published 16 Nov 2026
The design of experiments to test hypothesis about air quality involves careful planning, data collection and analysis. Following steps should be done about the air quality.
iv) Thermosphere · Reviewed lesson · version 1 · published 16 Nov 2026
It extends from 85 km to 600 km above the earth surface. This is the region where the temperature increases as the altitude increases. The increase in the temperature is caused due to the absorption of energetic ultra-violet (UV) and X-rays. Temperature in the upper thermosphere can range from 500 °C to 2000 °C or higher.
14.11.1 Direct measurement methods · Reviewed lesson · version 1 · published 16 Nov 2026
i) Continuous Emission Monitoring System (CEMS)
Continuous emission monitoring system (CEMS) can usually monitor gas like CO, O₃, SO₂, NO₂, VOCs and PM at industrial sites.
ii) Air Quality Monitoring Stations (AQMS)
Fixed monitoring stations are equipped with various sensors and analyzers to measure pollutant level in real time located in urban areas and industrial zones.
iii) Remote Sensing Techniques
Satellites equipped with sensors can measure atmospheric pollutants over large areas, providing valuable data on regional and global air quality.
14.2 Air Pollutants · Reviewed lesson · version 1 · published 16 Nov 2026
Pollutants are substances (gases, liquids and solids) that are harmful to the environment. Air pollutants can be classified as primary and secondary.
The most important pollutants are mentioned below:
Oxides of Carbon (CO and CO₂)
Oxides of Nitrogen (NO and NO₂) collectively known as NOₓ
Oxides of Sulphur (SO₂ and SO₃) collectively known as SOₓ
Hydrocarbons (Methane, Ethane)
Low altitude Ozone (O₃)
Chlorofluorocarbons (CFCs)
Polycyclic Aromatic Hydrocarbon (PAHs)
Persistent Organic Pollutant (POPs)
Volatile Organic Compounds (VOCs)
Particulate Matter (PM)
14.4.7 Polycyclic aromatic hydrocarbon (PAHs)
14.4.7 Polycyclic Aromatic Hydrocarbon (PAHs) · Reviewed lesson · version 1 · published 16 Nov 2026
Polycyclic aromatic hydrocarbon (PAHs), composed of fused multiple aromatic rings are common environmental pollutants. Naphthalene, anthracene and phenanthrene are examples of PAHs. They are generated primarily during the incomplete combustion of fossil fuels (coal, oil, petrol, and wood), vehicle emissions, industrial processes and even grilled foods. Some PAHs in the environment originate from the natural sources such as open burning, natural loss or seepage of petroleum and coal deposits. Naphthalene, anthracene and phenanthrene are examples of PAHs. They have potential toxicity and carcinogenic properties.
14.14 Strategies Used to Reduce Air Pollution · Reviewed lesson · version 1 · published 16 Nov 2026
A variety of technologies is used to reduce air pollution and improve air quality. The following five types of technologies can be used to control emission of air pollutants.
14.5.2 Impact of Deforestation on the Atmosphere · Reviewed lesson · version 1 · published 16 Nov 2026
Deforestation is purposeful cleaning or thinning of forests by humans. Deforestation represents one of the largest issues in global climate. Forests absorb GHGs like CO₂ and clean air for us. In short, deforestation has a wide range of negative impact on the environment, including loss of biodiversity climate change, soil degradation, and water cycle disruption.
Quick Check 14.2
14.5.1 Impact of burning fossil fuels on the atmosphere
14.5.1 Impact of Burning Fossil Fuels on the Atmosphere · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
The burning of fossil fuels is the primary cause of current climate change, altering the earth ecosystem and causing human and environment health problems. The burning of fossil fuels affects the earth system in a variety of ways. Some of these ways include greenhouse gas emission, air pollution, volatile organic compounds.
Figure 14.2: Impacts of air pollutants on the atmosphere (original drawing after the textbook's Figure 14.2).
14.10.1 Main health risks associated with air pollutions
14.10.1 Main Health Risks Associated with Air Pollutions · Reviewed lesson · version 1 · published 16 Nov 2026
i) Respiratory Diseases
Air pollutants such as ozone, particular matters (PM) and nitrogen dioxide (NO₂) can increase asthma symptoms and trigger asthma attack. Long term exposure may lead to chronic cough and respiratory infections like pneumonia.
ii) Cardio–Vascular Diseases
Exposure to particular matters and other pollutants can increase the risk of heart attack by causing inflammation, blood vessel damage, high blood pressure and finally heart stroke.
iii) Cancer
Prolonged exposure to certain air pollutants especially particulate matter (PM) and carcinogenic compounds (benzene formation) cause lung cancer.
iv) Reproductive and Developmental Effects
Exposure to air pollution may negatively impact reproductive health and fertility in both man and women. Premature birth and developmental problems in children may occur.
Quick Check 14.4
14.4.9 Volatile organic compounds (VOCs)
14.4.9 Volatile Organic Compounds (VOCs) · Reviewed lesson · version 1 · published 16 Nov 2026
A large group of organic compounds that easily evaporates at room temperature. VOCs are emitted as gases from certain solids or liquids. Liquid fuels are major sources of VOCs that impact outdoor air quality. Vehicle exhaust and burning liquid fossil fuels, wood and garbage all release VOCs into the atmosphere.
Exposure to VOCs can cause a variety of health effects including eye, nose and throat irritation, headache, nausea are short term exposures and damage to the liver, kidney and central nervous system are long term exposures. They are significant air pollutants contributing to indoor and outdoor air pollution Some common VOCs are benzene, xylene, toluene, ethanol, formaldehyde and acetone etc,.
14.4.11 Heavy Metals (Lead, Mercury and Cadmium) · Reviewed lesson · version 1 · published 16 Nov 2026
Heavy metal like lead, mercury and cadmium can indeed be significant air pollutants. They are released into the atmosphere from various industrial process, transportation and other human activities. Metallurgy, battery waste and incineration are their major sources.
14.6.2 Acid Rain · Reviewed lesson · version 1 · published 16 Nov 2026
When rain water has pH less than 5.6, it is known as acid rain refers to precipitation (rain, snow sheet or hail). Burning of fossil fuels releases SOₓ and NOₓ into the atmosphere. These gases mix with the moisture in the air and form acids. Wind can carry these acidic droplets to huge distance. Finally, these droplets return to the ground as acid rain, acid hail, snow and even fog. Acid rain looks, feels and tastes like clean rain. Its corrosive nature causes widespread damage to the environment. The most important chemical reactions are following:
2SOX2X(g)+OX2X(g)2SOX3X(g)
swipe2SO₂(g) + O₂(g) → 2SO₃(g)
14.4.2 Oxides of nitrogen (NOx)
14.4.2 Oxides of Nitrogen (NOx) · Reviewed lesson · version 1 · published 16 Nov 2026
The gases like nitric oxide (NO) and nitrogen dioxide (NO₂) are represented by NOₓ. It is generally produced from burning fossil fuels. NOₓ is produced as a result of the following chemical reactions:
ii) Stratosphere · Reviewed lesson · version 1 · published 16 Nov 2026
Above the troposphere, the stratosphere lies which is at a distance of 12-50 km above the earth surface. Temperature increases from -58 °C to -2 °C. Stratosphere can also be divided into three regions according to the distribution of ultraviolet radiations from the Sun. Since ozone in the upper layer absorbs high energy ultraviolet radiations from the Sun. It breaks down into monoatomic oxygen and diatomic oxygen.
OX3X(g)hνOX2X(g)+OX(g)
swipeO₃(g) →(hν) O₂(g) + O(g)
14.4.6 Chlorofluorocarbons (CFCs)
14.4.6 Chlorofluorocarbons (CFCs) · Reviewed lesson · version 1 · published 16 Nov 2026
The decrease in the concentration of ozone in stratosphere is called depletion of ozone. This depleting of ozone has been caused by certain organic compounds called chlorofluorocarbons (CFCs). These compounds exist as gases or low boiling liquids at room temperature and are used as aerosols or refrigerants.
Chlorofluorocarbons are known to diffuse into the stratosphere where they are broken down by UV radiation creating chloride free radical (Cl•). The chloride free radical breaks down the Ozone molecule as shown in the following reactions.
CFClX3UVCFClX2+ClX∙
swipeCFCl₃ →(UV) CFCl₂ + Cl•
14.4.1 Oxides of carbon
14.4.1 Oxides of Carbon · Reviewed lesson · version 1 · published 16 Nov 2026
There are two oxides of carbon i.e., carbon monoxide (CO) and carbon dioxide (CO₂).
Carbon monoxide (CO)
Carbon monoxide (CO) is produced mainly due to incomplete combustion of fossil fuels.
for the disposal of domestic and industrial waste. Using open fire to bulk domestic and industrial waste can produce dust, smoke and significant amount of air pollutants.
vii.Use of low-Sulphur Diesel Reduction of permissible level of sulphur in diesel.
Through these regulations and measures, Pakistan aims to improve air quality and minimize the adverse effects of air pollutions on public health and the environment.
Figure 14.4: Illustration of Photochemical smog (original drawing after the textbook's Figure 14.4).
Photochemical smog is a type in which primary air pollutants like nitrogen oxides (NOₓ), VOC and unburned hydrocarbons undergo photochemical reactions in the presence of sunlight and form secondary pollutants like ozone and peroxyacetyl nitrates (PAN). This type of smog is considered more dangerous as it can cause heart palpitations, pneumonia and even lung cancer.
Greenhouse gases do not reflect infrared radiation. CO₂ and water vapour absorb the longer-wavelength infrared (heat) radiation given off by the warm Earth and re-emit part of it back towards the surface, which keeps the Earth warmer.
The greenhouse effect is a phenomenon which is based on the gases to absorb infra-red radiations. In the day, heat from the sun (in the form of infrared) passes through the atmosphere heating up the earth. At night, the earth radiate heat to the outer space. Some atmospheric gases trap the heat from the sun, thus, preventing the loss of heat. Higher the concentration of carbon dioxide gas and other gases, greater will be the absorption of thermal radiations and greater will be the increase of global temperature.
Natural sources of N₂O include microbial processes in soil and oceans where bacteria break down nitrogen compounds. Human activities include agricultural activities (synthetic fertilizers) and industrial processes (combustion of fossil fuels). It depletes the ozone layer. The increased levels of N₂O contribute to climate change and can also affect air quality.
The middle stratosphere has less ultraviolet radiations passing through it. Here, monoatomic oxygen and diatomic oxygen recombine to form ozone which is an exothermic reaction due to which formation of ozone layer takes place.
OX2X(g)+OX(g)OX3X(g)
swipeO₂(g) + O(g) → O₃(g)
The lower stratosphere receives very low ultraviolet radiations, thus monoatomic oxygen is not found here and ozone is not formed here.
The formation of another chlorine free radical in the last step that can further break down another molecule of O₃. The 2nd and the 3rd steps are repeated many times.
Carbon dioxide is the key greenhouse gas emitted by human activities like combustion of fossil fuels. Carbon dioxide (CO₂) is a primary greenhouse gas that traps heat in the atmosphere, leading to global warming.