Class 12 · Physics · Chapter 14 (Contents page: 2)
Simple Harmonic MotionSimple Harmonic Motion
SHM is oscillation under a restoring force proportional to displacement; mass-spring, simple pendulum and projection of circular motion are analysed for x, v, a, phase and energy; damping, forced oscillation, resonance and its applications follow.
9 MCQs · 6 long questions · 8 short questions · 6 numericals · 6 constructed-response
The chapter's topics and page numbers follow the official textbook. Lessons, lectures and practice are added after academic review.
Lessons
14.2 Simple Harmonic Motion
14.2 Simple Harmonic Motion · Reviewed lesson · version 1 · published 16 Nov 2026
Simple harmonic motion is a type of oscillation or vibratory motion produced under the action of restoring force.
The necessary conditions for the execution of simple harmonic motion are:
The restoring force shall be directly proportional to the displacement from the mean position.
The restoring force shall be proportional to the inertia of body.
The force and displacement should follow Hooke's law (F = – kx), where k is spring constant depends upon the nature of material of spring.
Acceleration of oscillating object should be proportional to the displacement (α–x), the negative sign indicates that acceleration is directed towards mean position.
14.9 Damped Oscillation · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
In an ideal free oscillation system, we have studied that the total mechanical energy of the oscillating body remains constant, as we discussed in mass spring system, motion of a body in a circle and also in case of a simple pendulum. But in practical life, as we observe daily, some dissipating forces such as air resistance, friction, etc. The amplitude of the oscillation gradually decreases with time due to these forces and finally it comes to rest.
For example, a girl is swinging on a swing as shown in Fig. 14.14. Damping occurs and the swing will oscillate with smaller and smaller amplitude and eventually stops. Graphically the damped oscillation of the oscillating body is shown in Fig. 14.15. Similarly, the amplitude of oscillating simple pendulum decreases gradually with time till it become zero and touching an oscillating tuning fork with our finger are examples of damped oscillation.
Application of Damped Oscillation
Application of Damped Oscillation · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Figure 14.16: Suspension system of a vehicle (original drawing after the textbook's Figure 14.16).
Shock absorbers used in the suspension system of a car shown in Fig. 14.16 are one practical application of damped oscillation. Damping system is required to ensure a comfortable ride for the passengers when the car is moving on a bumpy, rough road by producing excessive oscillations by damping using shock absorbers in such vehicles.
Acoustic Levitation · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
Interesting Information: Ernst Chladni (original drawing after the portrait printed in the textbook)
Acoustic levitation is a method for suspending matter in air against gravity using radiation pressure from high intensity sound waves. This method explains the relations between resonance and standing waves. In which the high frequency sound waves (ultrasonic) are used to suspend the small particles such as bits of styrofoam or droplets of water against gravity in air without any physical contact.
Figure 14.23: Acoustic levitation setup (original drawing after the textbook's Figure 14.23).
14.11 Sharpness of Resonance
14.11 Sharpness of Resonance · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Figure 14.20: Damping system illustration (original drawing after the textbook's Figure 14.20).
We have seen that at resonance, the amplitude of the oscillator becomes very large. The amplitude as well as its sharpness, both depend upon the damping. Smaller the damping, greater will be the amplitude and more sharp will be the resonance.
A heavily damped system has a fairly flat resonance curve as is shown in an amplitude frequency graph in Fig. 14.20.
Point to ponder!: the collapse of the Tacoma Narrows Bridge (original drawing after the photograph printed in the textbook)
14.8 Free and Forced Oscillations
14.8 Free and Forced Oscillations · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Figure 14.12: Illustration of free oscillation of simple pendulum (original drawing after the textbook's Figure 14.12).
For example, a simple pendulum shown in Fig. 14.12 vibrates freely with its natural frequency that depends only upon its length when it is slightly displaced from its mean position.
Figure 14.13: Illustration of forced oscillations of a swing (original drawing after the textbook's Figure 14.13).
In free oscillations, the total energy of the body remains constant i.e., energy is conserved. As we are assuming in the absence of resistance force the amplitude of the oscillation remains constant.
If a freely oscillating system is subjected to an external force, then forced vibrations will take place. Such as when swing is struck repeatedly, then forced vibrations are produced as shown in Fig. 14.13.
Quantitative Analysis
Quantitative Analysis · Reviewed lesson · version 1 · published 16 Nov 2026
Consider a motion of particle P along the circumference of circle of radius x₀ with uniform angular velocity ω. Its linear velocity at point P is along the tangent (vₚ = rω). Let Q be the projection which oscillates along the diameter of circle about the mean position O. When the body is at point P its projection is at distance x from the mean position.
14.1 Oscillatory Motion · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
Examples of oscillatory motion: a mass on a vertical spring, a mass on a horizontal spring, a simple pendulum, a tuning fork and a child on a swing (original drawing after the textbook's unnumbered pictures).
We come across many examples of oscillatory motion in our daily life. Some examples of oscillatory motion are given below:
(i)A simple pendulum vibrating about its mean position when displaced from its rest position.
(ii)A mass oscillating at the end of a spring in a horizontal or vertical plane when pulled and released.
(iii)A vibrating tuning fork.
(iv)The atoms or molecules in a solid substances oscillate about their mean position.
Chladni Plate
Chladni Plate · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Figure 14.22: Chladni plates, (a) classical and (b) modern (original drawing after the textbook's Figure 14.22).
A Chladni plate is a good example of resonance and it demonstrates a standing waves pattern. It is usually a circular or square shaped metal plate which is fixed horizontally to a vibrator and is driven transversally at its centre as shown in Fig. (14.20). When the plate is vibrated at the frequency of a resonant normal mode, the nodes and antinodes are formed over the surface of the plate.
The metal plate does not vibrate at points where nodes are formed while the rest of the plate is vibrating with its maximum amplitude. In order to observe such pattern, sand is sprinkled evenly in the form of a thin layer over the plate. Hence, the sand will vibrate and shift from antinode to nodes because the nodes are stationary.
Application of Resonance and Standing Waves · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
There are many applications of resonance in different devices that generate and use standing waves.
There is relationship between standing wave and resonance phenomenon which can be studied by some experimental examples such as Rubens tube, chaaladni plates and acoustic levitations.
Interesting Information: the portrait printed in the Rubens tube box (original drawing after the printed portrait)
A Rubens tube is a long tube which is an experimental apparatus used to explain the acoustic standing wave. It consists of a metal pipe with holes drilled a long top and sealed at both ends. One sealed end is attached to a small speaker or frequency generator while the other end is connected to supply of a flammable gas as shown in Fig (14.21). The pipe is filled with gas and gas leaks from holes and produce a resonant flame.
Simple Harmonic Motion: Introduction
Introduction · Reviewed lesson · version 1 · published 16 Nov 2026
Some Circumstances in which Resonance is Useful
Some Circumstances in which Resonance is Useful · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 73 KB
1. Heating / Cooking Food in Micro Wave Oven
Figure 14.18: Microwave oven (original drawing after the textbook's Figure 14.18)
Microwave ovens generate super high frequency electromagnetic waves (3GHz-30GHz and wavelength of about 12 cm and scatter them throughout the oven. The frequency of microwave excites water molecules in food causing them to oscillate at the same frequency as the microwaves and cause them to collide with one another. Friction generated by the collisions changes the kinetic energy of the water into heat that warms the food.
Food containing water molecules can only be heated by the microwave oven as shown in Fig. 14.18. The plastic or glass container do not heat up since they do not contain water molecules.
2. Radio Tuning:
Figure 14.19: Radio (original drawing after the textbook's Figure 14.19)
14.4 Simple Harmonic Motion and Uniform Circular Motion
14.4 Simple Harmonic Motion and Uniform Circular Motion · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 89 KB
In order to get an insight into simple S.H.M, we will co-relate it with uniform circular motion which we have already studied. The different parameters such as displacement, velocity, acceleration and time period of simple harmonic motion (S.H.M) can be understood by relating it with uniform circular motion. It has been observed that when a particle moves in a circular path, its projection on diameter of the circle executes S.H.M.
To study the simple harmonic motion, consider a turntable of radius r with a ball attached to its rim. A beam of light casts a shadow of the ball on the screen (Fig 14.4).
Figure 14.4: The oscillation of the shadow of ball on screen. The ball is attached with uniformly rotating turn table (original drawing after the textbook's Figure 14.4).
When the turntable rotates with constant angular speed ω, then the ball also moves along it with uniform circular motion. Its shadow on the screen oscillates executing to and fro motion across the screen in the form of simple harmonic motion, like a body attached to a spring.
Using simple pendulum to measure g · Reviewed lesson · version 1 · published 16 Nov 2026
The simple pendulum can be used to determine the gravitational acceleration at a particular location. We measure the length 'ℓ' of the pendulum and then set the pendulum into motion. The time period T of the simple pendulum is measured using a stopwatch and the acceleration due to gravity is calculated by using Eq. (14.10) in the following form:
g=T24π2ℓ
swipeg = 4π²ℓ/T²
14.6 Graphical Representation of S.H.M
14.6 Graphical Representation of S.H.M · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Figure 14.9 (a): Graphical representation of displacement of oscillation performing S.H.M (original drawing after the textbook's Figure 14.9 (a)).
The graphical representations of displacement, velocity and acceleration of a body executing SHM is given in Fig. 14.9 (a, b and c).
(i)The displacement of the particle executing SHM is given by the expression:
x=x0cosωt(14.19)
swipex = x₀ cos ωt (14.19)
Terms Related to Oscillatory Motion
Terms Related to Oscillatory Motion · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
We will discuss some important terms related to oscillatory motion.
Figure 14.1: Illustration of different terms of oscillatory motion with the help of vibrating simple pendulum (original drawing after the textbook's Figure 14.1).
Vibration: “One complete round trip (cycle) of vibrating body about its mean position is called vibration”. Alternatively, vibration can also be defined motion of the body from one extreme position to other extreme position and back to first extreme position crossing mean position. For example, motion of bob of pendulum from A to B and back from B to A is one vibration as shown in Fig. 14.1.
Instantaneous Displacement (x): “The distance of a vibrating body from its mean position at any instant, is called instantaneous displacement”. The distance of bob of simple pendulum from O to C is called displacement and denoted by “x”. i.e., OC = x.
Amplitude (x₀): “The magnitude of the maximum displacement of the vibrating body on either side of its mean position is called amplitude denoted by x₀, the amplitude of bob of simple pendulum is shown in Fig. 14.1 is OA or OB. i.e., OA = OB = x₀.
14.7 Conservation of Energy in S.H.M
14.7 Conservation of Energy in S.H.M · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Figure 14.10: A mass on a spring at its natural length, at the mean position and at the extreme position (original drawing after the textbook's Figure 14.10).
When a body is executing simple harmonic motion, it possesses both potential energy as well as kinetic energy. Its potential energy is on account of its displacement from mean position and the kinetic energy is due to its velocity. These energies vary during the oscillation, but the total energy at any instant remains constant in the absence of unbalanced frictional forces. In case of mass-spring system shown in Fig (14.10), when the mass is displaced from the mean position O then there is a restoring force (F) whose value is zero at mean position when x = 0 and its value is maximum at either extreme position where x = x₀. Thus, average value of force from the mean position to the extreme position is:
Fav=20+F=2F
swipeF_av = (0 + F)/2 = F/2
14.3 Practical S.H.M Systems
14.3 Practical S.H.M Systems · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 91 KB
Mass Attached to An Elastic Spring
Figure 14.2: Mass attached with spring performing S.H.M (original drawing after the textbook's Figure 14.2).
Consider a body of mass 'm' attached with a spring of spring constant 'k' lying on smooth horizontal surface (Fig. 14.2). Initially the body is at rest position O called mean position. Now we apply some force F on the body and we displace the body from O to A through displacement x towards right. According to Hooke's law, the applied force is proportional to displacement, i.e.;
F∝xorF=kx(14.1)
swipeF ∝ x or F = kx (14.1)
14.5 Phase
14.5 Phase · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Phase is the quantity which shows the state of motion of an oscillator. In circular motion, the displacement of projection of the body moving in a circle, executing S.H.M. on the diameter of the circle, is given by: x = x₀ cosθ
orx=x0cos(ωt+180∘)(14.17)
swipeor x = x₀cos(ωt + 180°) (14.17)
Simple Pendulum
Simple Pendulum · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
A simple pendulum consists of a small heavy solid bob of mass m suspended from a rigid support through a light inextensible string of certain length.
Figure 14.3: Simple pendulum, (a) swinging between its extreme positions and (b) the forces on the bob at P (original drawing after the textbook's Figure 14.3).
When the pendulum is displaced from its mean position O through an angle to the extreme position P and released, then a restoring force acts on the pendulum towards the mean position. Due to this restoring force, the pendulum starts oscillation to and fro under the action of gravity along a curved path about the mean position O (Fig. 14.3-b).
At extreme position P, the weight of the body makes an angle θ with the direction of the string. We can resolve weight into its rectangular components. As the pendulum has no motion along the direction of the string, therefore, the component mg cosθ and tension T are along the same line but in opposite direction, so they cancels the effects of each other. The component mg sinθ provides the necessary restoring force towards mean position and is responsible for the motion of simple pendulum. Thus;
Time period and frequency
Time period and frequency · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Hereω2=mk
swipeHere ω² = k/m
orω=mk
swipeor ω = √(k/m)
Instantaneous Displacement
Instantaneous Displacement · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 92 KB
Figure 14.5: A point P moving on circular path at constant angular velocity (original drawing after the textbook's Figure 14.5).
If A is the initial position of particle P, then the angle which the radius OP sweeps out in time t is θ = ωt with OQ as shown in Fig. 14.5.
Considering triangle POQ:
OPOQ=cosθ
swipeOQ/OP = cosθ
14.10 Resonance
14.10 Resonance · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 39 KB
In damped oscillation, the oscillator cannot maintain its natural frequency for long duration due to the resistive forces and the amplitude of the oscillation decreases gradually with time. But we can maintain constant amplitude by applying a periodic external force which is called a driving force. Thus, when the oscillating body is subjected to a periodic driving force, then such oscillation is called forced oscillation and its frequency is called driving frequency. The vibration of a vehicle caused by the running of engine is an example of forced vibration. In forced oscillation, the amplitude of the oscillation depends upon the relation between the driving frequency and the natural frequency of the body.
If the frequency of the driving force is same as the natural frequency of the oscillating body, the amplitude of vibration is very much increased. This phenomenon is known as resonance. It also occurs when the applied force has frequency an integral multiple of the natural frequency of the body. If f is the natural frequency of a body, then resonance will take place at:
f2=2f1,f3=3f1,f4=4f1,…fn=nf1
swipef₂ = 2f₁, f₃ = 3f₁, f₄ = 4f₁, … fₙ = nf₁
Instantaneous Velocity
Instantaneous Velocity · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 99 KB
Figure 14.6: Velocity of the point P and its horizontal component (original drawing after the textbook's Figure 14.6).
Considering Fig. 14.6, the line PR is the horizontal component of velocity vₚ of the particle and it is parallel to the diameter AB of the circle. Therefore, as Q vibrates horizontally, so instantaneous velocity of the point Q is horizontal component of velocity vₚ.
v=(vP)x
swipev = (vₚ)ₓ
Instantaneous Acceleration
Instantaneous Acceleration · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 92 KB
Acceleration aₚ of the particle at point P is directed towards the centre of the circle as shown in Fig. 14.7. The horizontal component of aₚ is along the diameter. Thus, the acceleration of projection Q is equal to the horizontal component of aₚ.
a=(aP)x
swipea = (aₚ)x
a=aPcosθ
swipea = aₚ cosθ
Figure 14.14: Damped oscillation of swing (original drawing after the textbook's Figure 14.14).
Figure 14.15: Graphical representation of damped oscillation (original drawing after the textbook's Figure 14.15).
The teacher may perform activity in class room to show relationship between resonance and standing waves using resonance tube or Chladni plates.
Working: Basically, an acoustic levitator consists of a source of sound (transducer) and a reflector. The high frequency sound waves from the transducer is bounced off by the reflector. The interaction between the incident and reflected waves forms a standing wave, where the pressure of sound in the area of node is minimum and pressure is maximum in the area of antinode. Such difference between higher and lower pressure exerts a force on small particles of Styrofoam against the gravity. As a result, the particles are trapped at node as shown in Fig. (14.23). In this case, the nodes of the standing waves act as acoustic traps.
The effect of damping can be observed by attaching a pendulum having light mass such as a pith ball as its bob and another of the same length carrying a heavy mass such as a lead bob of equal size, to a rod (Fig. 14.17). They are set into vibrations by a third pendulum of equal length, attached to the same rod. It is observed that amplitude of the lead bob is much greater than that of the pith-ball. The damping effect for the pith-ball due to air resistance is much greater than for the lead bob.
The vibrations of a factory floor caused by the running of heavy machinery are an example of forced vibrations. Another example of forced vibration is loud music produced by sounding wooden boards of string instruments.
(vi)Air molecules oscillate when sound waves travel through air.
(vii)Most of musical instruments like guitar and violin have strings attached to them to produce music by vibratory motion.
(viii)The wings of birds during flying.
Guitar strings and the wings of a flying bird (original drawing after the photographs printed beside examples (vii) and (viii))
All the bodies that undergo vibrational or oscillation motion have an equilibrium position or mean position. When the body is displaced from this mean position then there is restoring force which brings it back to its equilibrium position and it causes vibration or oscillation motion of the body.
Figure 14.21: Rubens tube apparatus (original drawing after the textbook's Figure 14.21).
When sound waves of resonance frequency are produced by frequency generator, a standing wave is formed inside the tube. The standing wave creates points with oscillating (higher and lower) pressure within the tube. Less gas will escape from the holes in the tube where pressure is low, hence, the flame will be lower at these points. Large quantity of gas will escape from holes in the tube where pressure is high, hence, flame will be high at these points.
These low and high flame reveal the nodes and antinodes of standing waves inside the tube as shown in Fig. (14.21).
This outcome prints a = ω²x without the minus sign. As the outcome just above says, the acceleration is opposite to the displacement: a = −ω²x, the same as Eq. 14.4, a = −(k/m)x, with ω² = k/m.
In this chapter, we will discuss concept of simple harmonic motion (S.H.M), a special type of oscillatory motion where a restoring force always pulls the object back towards its mean position. We will also explore the mathematics and physics behind S.H.M, understanding its characteristics, equations and real world applications.
The tuning of an analogue radio set for a certain station is also based on resonance in which we need to turn the knob of a radio to tune a station. Here, actually, we change the natural frequency of the electrical circuit of receiver to make it equal to the transmission frequency of radio station. When two frequencies match with each other, then resonance occurs and energy absorbed by the station is maximum and this is the only station we hear. A simple radio is shown in Fig.14.19.
Following are some circumstances in which resonance should be avoided:
1. Bridge Vibration
The soldiers are advised to break their steps while crossing a bridge. If the soldiers march in steps, then it is possible that the frequency of their footsteps becomes equal to the natural frequency of the bridge and the bridge may be set into vibrations with large amplitude due to the resonance and bridge may collapse.
2. Aeroplane Wing
For equilibrium, the structure of an aero-plane has been designed with its two wings. These wings experience the forces such as; aerodynamics force, turbulence, engine vibration, etc. When the frequencies of these forces are matching with the natural frequency of the wings, the resonance will occur and it may be proved dangerous.
Amplitude of a wave measures the energy carried by a wave. The greater the amplitude of the wave, greater will be the energy carried by the wave and vice versa.
Time Period: Time period is defined as the time taken to complete one vibration or one cycle. It is represented by T and its SI unit is second (s).
Time period in terms of frequency f and angular frequency ω is expressed as:
T=f1=ω2π
swipeT = 1/f = 2π/ω
Frequency: Frequency is defined as the number of vibrations or oscillations (n) completed by the vibrating body in one second. It is denoted by f.
Mathematically,f=tn
swipeMathematically, f = n/t
It is expressed in terms of the reciprocal of time period i.e.;
f=T1
swipef = 1/T
The unit of frequency is hertz (Hz). One hertz is defined as one oscillation per second. The dimension of frequency is [T⁻¹].
Angular Frequency: Angular displacement per unit time is called angular frequency. It is represented by ω and it can be expressed as:
ω=tθ
swipeω = θ/t
Now for one revolution θ = 2π radian and t = T (time period).
Soω=T2π
swipeSo ω = 2π/T
Asf=T1Therefore,ω=2πf
swipeAs f = 1/T Therefore, ω = 2πf
The SI unit of angular frequency is rad s⁻¹ and its dimension is [T⁻¹].
When the spring is stretched to its maximum displacement x₀, work is done on the spring which is given by
W=21kxo(xo)=21kx02
swipeW = ½kx₀(x₀) = ½kx₀²
This work done on the mass attached to a spring is stored in terms of potential energy, called elastic potential energy. So, we have the expression for P.E. at any instant x given by
(P.E.)inst=21kx2(14.22)
swipe(P.E.)inst = ½kx² (14.22)
It is clear from Eq. (14.22) that the potential energy of oscillator is zero at x = 0 and maximum at x = ± x₀ i.e., the extreme position on either side and total energy is entirely elastic potential energy.
(P.E.)max=21kxo2(14.23)
swipe(P.E.)max = ½kx₀² (14.23)
After the removal of force, the mass attached to a spring starts its motion with velocity v.
As the instantaneous velocity v of the mass executing simple harmonic motion is given by;
v=ωxo2−x2
swipev = ω√(x₀² − x²)
As ω = √(k/m), so above Eq. becomes:
v=mk(xo2−x2)(14.24)
swipev = √((k/m)(x₀² − x²)) (14.24)
At mean position x = 0, the mass gets maximum velocity i.e.,
vmax=vo=mkxo(14.25)
swipevₘₐₓ = v₀ = √(k/m) x₀ (14.25)
Hence, at any instant where the displacement is x, the kinetic energy of mass attached to spring is given by
K.E.=21mv2=21k(xo2−x2)(14.26)
swipeK.E. = ½mv² = ½k(x₀² − x²) (14.26)
At mean position (x = 0), the elastic P.E. is zero but the velocity is maximum, hence, total energy is entirely kinetic energy.
T.E=K.E.max=21mvmax2=21kxo2(14.27)
swipeT.E = K.E.max = ½mv²max = ½kx₀² (14.27)
The total energy is the sum of kinetic and potential energy of the system at displacement 'x', so we may write;
T.E=K.E+P.E
swipeT.E = K.E + P.E
Substituting the values of K.E. and P.E. from above Eqs., we have
T.E=21k(xo2−x2)+21kx2=21kxo2(14.28)
swipeT.E = ½k(x₀² − x²) + ½kx² = ½kx₀² (14.28)
As, ω = √(k/m) or k = mω², so Eq. 14.28 can be written as;
T.E=21kmω2xo2(14.29)
swipeT.E = ½kmω²x₀² (14.29)
From Eqs. (14.23), (14.27) and (14.28), it is proved that total energy of mass spring system is constant and is directly proportional to the square of the amplitude of oscillation. This statement of conservation of energy is equally valid for all bodies executing S.H.M. When K.E. of mass is maximum, mass passes through the centre of oscillation, the P.E. of mass spring is zero (x = 0), conversely when the P.E. of spring is maximum, the mass is at its extreme position on either side, the K.E. of mass is zero (x = x₀).
Figure 14.11: Graphical representation of energy (K.E, P.E and T.E) against displacement, for S.H.M (original drawing after the textbook's Figure 14.11).
The energy oscillates between K.E. and P.E., but their sum remains constant. This can be illustrated by plotting graph of K.E., P.E. and T.E. versus displacement as shown in Fig. (14.11).
Example 14.5
A body of 0.010 kg executes simple harmonic motion of period 6 s. one second after it has passed its mean position, it's velocity is 0.06 meter per second. Find its kinetic energy, potential energy and Total energy.
Solution
m = 0.010 kg
T = 6 s
v = 0.06 m s⁻¹ (at t = 1 s)
Angular frequency (ω)
ω = 2π/T = 2π/6 = π/3 rad s⁻¹
K.E. = (½) mv²
= (½) × 0.010 kg × (0.06 m s⁻¹)²
= 1.8 × 10⁻⁵ J
To find the total energy (Eᴛ), first, find the amplitude x₀, using the formula of velocity;
v = x₀ω sin(ωt)
0.06 m s⁻¹ = x₀(π/3) sin(π/3 × 1)
0.06 m s⁻¹ = x₀(π/3)(0.866)
0.06 m s⁻¹ = x₀(1.047)(0.866)
0.06 m s⁻¹ = 0.90x₀
x₀ = 0.066 m
Total energy Eᴛ of system is given by
Eᴛ = ½mω²x₀²
Substituting the values, we have:
Eᴛ = ½ 0.01(π/3)²(0.066)²
Eᴛ = 2.4 10⁻⁵ J
P.E. = Eᴛ − K.E
= 2.4 10⁻⁵ − 1.8 10⁻⁵
P.E. = 0.6 10⁻⁵ J
P.E. = ½kx² = ½mω²x²
Note:
(i)P.E. can also be calculated by expression P.E. = ½kx² = ½mω²x² where x being displacement of a particle which can be found out by x = x₀ cosω t.
(ii)The total energy of a system can also be found out by Eᴛ = K.E. + P.E.
The spring will exert the force on the body due to elastic restoring force at the same time which is equal in magnitude and opposite in direction to the applied force.
F=−kx(14.2)
swipeF = −kx (14.2)
When the body is released by removing the applied force, it will move towards 'O' and will cross the mean position O due to inertia and reaches the point B, compresses the spring it returns and starts oscillating between A and B.
Also, according to Newton's second law of motion:
F=ma(14.3)
swipeF = ma (14.3)
Comparing Eqs. (14.2) and (14.3), we have
ma=−kx
swipema = −kx
ora=−mkx(14.4)
swipeor a = −(k/m)x (14.4)
where 'k' is spring constant depending upon the nature (physical shape and structure of a spring). The negative sign shows that acceleration and displacement are always in opposite direction or acceleration is always towards mean position.
As, k/m is a constant, so, Eq. (14.4), can be written as
a=−(constant)x
swipea = −(constant) x
ora∝−x
swipeor a ∝ −x
This is mathematical form of simple harmonic motion.
Where x is instantaneous displacement, x₀ is maximum displacement; ω is the angular velocity its graphical representation is shown in Fig. 14.8 (a). The general way of showing this equation is:
x=x0cos(ωt+ϕ)(14.18)
swipex = x₀cos(ωt + φ) (14.18)
The time varying quantity (ωt + φ), is called the phase of the motion. It describes the state of motion at a given time. The constant φ is called the phase constant (or phase angle). The value of φ depends on the displacement and velocity of the particle at t = 0.
The quantity φ represents the phase difference between the states of motion of two oscillators. Let us explain, with the help of graph plotted between x and t.
If φ = 0°, then Eq. (14.18) becomes:
x=x0cosωt
swipex = x₀ cosωt
Figure 14.8 (a): Graph of x = x₀ cos(ωt + φ) for φ = 0° (original drawing after the textbook's Figure 14.8 (a)).
Putting t = 0, T/4, T/2, 3T/4, ...., we obtain a graph, as shown in Fig. 14.8 (a). This graph shown that;
at t = 0, T/2 and T (corresponding to θ = 0, π and 2π), the point is at the extreme positions. At t = T/4 and 3T/4 (corresponding to θ = π/2 and 3π/2), the point is at mean position.
If φ = 90°, then Eq. (14.18) becomes:
x=x0cos(ωt+90∘)
swipex = x₀cos(ωt + 90°)
Figure 14.8 (b): Graph of x = x₀ cos(ωt + φ) for φ = 90° (original drawing after the textbook's Figure 14.8 (b)).
Putting t = 0, T/4, T/2, 3T/4, T ..., we obtain graph, as shown in Fig. 14.8 (b). This graph shows that:
at t = 0, T/2 and T (corresponding to θ = 0, π and 2π), the point is at mean positions. At t = T/4 and 3T/4 (corresponding to θ = π/2 and 3π/2), the point is at extreme position.
If φ = 180°, then Eq. (14.18) becomes:
x=x0cos(ωt+180∘)
swipex = x₀cos(ωt + 180°)
Figure 14.8 (c): Graph of x = x₀ cos(ωt + φ) for φ = 180° (original drawing after the textbook's Figure 14.8 (c)).
Putting t = 0, T/4, T/2, 3T/4, T ...., we obtain a graph, as shown in Fig. 14.8 (c).
It can be noted that:
When the phase difference between two oscillating systems is 180°, they are said to be oscillating out of phase.
When phase difference between oscillating systems is 0° or 360°, they are said to be oscillating in phase.
Example 14.4
A 0.5 kg mass is attached to a spring with a spring constant of 200 N m⁻¹. the mas is displaced by 0.2 m from its equilibrium position and released from rest. Assuming simple harmonic motion, find:
Negative sign shows that the acceleration of the pendulum is always directed towards mean position. According to Newton's 2ⁿᵈ law:
F=ma
swipeF = ma
Comparing above equations
ma=−mgsinθ
swipema = −mg sinθ
a=−gsinθ(14.5)
swipea = −g sinθ (14.5)
If the angle of the simple pendulum is small, then the sinθ can be replaced by the angle θ itself, expressed in radians. That is, for small angles:
sinθ≈0
swipesinθ ≈ 0
So, Eq. (14.5) is written as:
a=−gθ(14.6)
swipea = −gθ (14.6)
By the definition of an angular displacement,
θ=ℓS
swipeθ = S/ℓ
where S is the actual path length followed by the pendulum. Thus,
a=−(ℓg)S
swipea = −(g/ℓ)S
In Fig. (14.3 (b) x is very nearly equal to the arc of length S of the circular path when the angle is small (about 10 or less). Hence,
a=−(ℓg)x(14.7)
swipea = −(g/ℓ)x (14.7)
Table 14.1: Values of θ and sinθ for small angle
θ(degree)
θ (radian)
sin θ
0.00
0.0000
0.0000
1.00
0.0175
0.0175
2.00
0.0349
0.0349
3.00
0.0524
0.0524
4.00
0.0698
0.0698
5.00
0.0873
0.0872
6.00
0.1048
0.1046
7.00
0.1222
0.1219
8.00
0.1397
0.1392
9.00
0.1571
0.1565
swipe
If length ℓ of the pendulum is fixed and 'g' remains constant for a given place and (g/ℓ) is constant, then Eq. (14.7) can be rewritten as;
a=−(constant)x
swipea = −(constant) x
a∝−x
swipea ∝ −x
This is the mathematical from of S.H.M and it is concluded that the motion of a simple pendulum is S.H.M.
Asa=−ω2x(14.8)
swipeAs a = −ω²x (14.8)
Comparing Eqs. (14.7) and (14.8), we have
ω2=ℓg
swipeω² = g/ℓ
orω=ℓg(14.9)
swipeor ω = √(g/ℓ) (14.9)
Asω=2πf,therefore,2πf=ℓgorf=2π1ℓg
swipeAs ω = 2πf, therefore, 2πf = √(g/ℓ) or f = (1/2π)√(g/ℓ)
T=f1=2πgℓ(14.10)
swipeT = 1/f = 2π√(ℓ/g) (14.10)
The above expression shows that the time period of simple pendulum is directly proportional to the square root of the length of the string and inversely proportional to the square root of acceleration due to gravity. The time period of motion of the pendulum is independent of the mass m of the bob and amplitude.
A pendulum that completes one vibration in two seconds, i.e., its time period is two seconds is known a second pendulum.
Figure 14.17: A set of five different pendulums of different lengths (original drawing after the textbook's Figure 14.17).
To demonstrate the resonance phenomenon, we perform a simple experiment. The experimental setup consists of two pair of pendulums A & B and C and D such that the length of A and B is ℓ₁, and length of C and D is ℓ₂. All the pendulums are suspended by a horizontal rod (Fig. 14.17).
Now we introduce another pendulum P whose length can be varied i.e. either ℓ₁ or ℓ₂. Consider the case when the length of pendulum P is equal to ℓ₁.
If the pendulum 'P' is set into vibration, this vibration reaches the other pendulums through the rod. Then the pendulums A and B receive a driving force through the rod and they also start vibration and their amplitude increases due to the resonance phenomenon because their lengths, natural frequency and natural periods are same. At the same time, the pendulums C and D whose natural frequencies are different from natural frequency of P do not oscillate i.e. they continue to remain at rest. If the length of the pendulum P is made equal to ℓ₂, and allowed to vibrate, then the pendulums C and D start vibration due to resonance while pendulum 'A and B' remain at rest.
Figure 14.7: Acceleration of the point P and its horizontal component (original drawing after the textbook's Figure 14.7).
As a = −x₀ω² (centripetal acceleration) and cos θ = x/x₀.
The negative sign indicates that the direction of acceleration is always directed towards the mean position.
a=−x0ω2(x0x)=−ω2x
swipea = −x₀ω²(x/x₀) = −ω²x
a=−xω2(14.15)
swipea = −xω² (14.15)
As particle is moving in the circle with uniform angular frequency ω, therefore, Eq. (14.15) can be rewritten as;
a∝−x
swipea ∝ −x
This expression is the mathematical condition of S.H.M i.e., acceleration is directly proportional to the displacement and negative sign shows that its direction is towards mean position, therefore, it is concluded that when a particle is moving along a circumference of a circle then its projection executes S.H.M.
Example 14.3
A 0.2 kg mass is attached to a spring with a spring constant of 10 N m⁻¹. The mass is displaced by 0.1 m from its equilibrium position and released from rest. Find:
Solution
(a)acceleration at x = 0.05 m (b) velocity at x = 0.05 m
m = 0.2 kg
k = 10 N m⁻¹
x₀ = 0.1 m
Angular frequency ω = ?
ω = √(k/m) = √(10 N m⁻¹ / 0.2 kg) = √50 = 5√2 rad s⁻¹ ≈ 7.07 rad s⁻¹.