Redox chemistry via electron transfer and oxidation numbers (rules, disproportionation, oxidation-number balancing), electrolysis with Faraday calculations and an electrolytic determination of the Avogadro constant, then electrode potentials: SHE, measurement of standard potentials, galvanic cells, cell potentials, feasibility, Nernst equation and the activity series. Ends with photovoltaic cells and the Winkler method for DO/BOD.
12 MCQs · 4 long questions · 11 short questions · 3 numericals
The chapter's topics and page numbers follow the official textbook. Lessons, lectures and practice are added after academic review.
Lessons
10.22 Photovoltaic cells
10.22 Photovoltaic Cells · Reviewed lesson · version 1 · published 16 Nov 2026
The word ‘photovoltaic’ is composed of photo (light) and volt (electrical potential). The cell which converts light energy into electrical energy is called photovoltaic cell.
10.27 Winkler Method, BOD and DO · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Figure 10.12: Inverse relationship between BOD and DO (original drawing after the textbook's Figure 10.12).
Biochemical oxygen demand (BOD) is the capacity of organic matter in natural water to consume oxygen within a period of five days. The value of BOD is the amount of oxygen consumed as a result of biological oxidation of dissolved organic matter in the sample. The oxidation reaction is catalyzed by microorganisms which are already present in the natural water. It is measured experimentally through Winkler method by calculating the concentration of oxygen at the beginning and at the end of five days period, in which a sealed water sample is maintained in the dark at constant temperature at 25°C.
Dissolved oxygen (DO) is defined as the amount of oxygen dissolved in water. It is dissolved either from the atmosphere or released by plants during photosynthesis in water. Its concentration is between 5 to 8 mg/dm³. The minimum level of DO should be 5 mg/dm³. Below 5 mg/dm³, the water supposed to be polluted.
Dissolved Oxygen (DO) and Biochemical Oxygen Demand (BOD) have an inverse relationship as shown in Figure 10.12. As bacteria consume oxygen in the water while decomposing organic matter, BOD increases, leading to lower dissolved oxygen (DO) level.
Winkler method
Winkler method is a technique used to measure the amount of dissolved oxygen (DO) in water samples. It is based on the idea that dissolved oxygen (DO) in the sample solution, has oxidizing properties and reacts with KI. The amount of iodine formed is measured by titrating with sodium thiosulfate using starch as an indicator which turns the solution dark blue, indicating the endpoint. The amount of iodine formed is proportional to the amount of dissolved oxygen in the solution.
10.11.1 Electrical Double Layer · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 65 KB
Figure 10.3: Formation of electrical double layer (original drawing after the textbook's Figure 10.3).
It is thought that the absolute electrode potentials cannot be measured due to the formation of an electrical double layer, when an element is placed in a solution of its ions. For example, when zinc is placed in a solution containing zinc ions, a tiny number of zinc atoms on the surface of the metal is converted to zinc ions, which go into solution. This leaves an excess of electrons on the surface of the zinc.
The solution around the metal now has excess Zn²⁺ ions. Some of these cations near the surface of the zinc are attracted to its surface. So, an electrical double layer is formed. This buildup of charge causes an electric potential (voltage) between the metal and the metal ions in solution as shown in Figure 10.3.
Due to the formation an electrical double layer, the potential cannot directly be measured. But the difference in potential between the metal/metal ion system and another system can be measured. We call this value the electrode potential, E. Electrode potential is measured in volts. The system we use for comparison is the standard hydrogen electrode (SHE).
10.2 Oxidation Number and its Significance · Reviewed lesson · version 1 · published 16 Nov 2026
The oxidation numbers are also called oxidation states. An oxidation number is a number given to each atom or ion in a compound that shows us its degree of oxidation. Oxidation numbers can be positive, negative or zero. The + or – sign must always be included. It is the apparent charge on an atom (per atom) of an element in a molecule or an ion. Higher positive oxidation numbers mean that an atom or ion is more oxidized. Higher negative oxidation numbers mean that an atom or ion is more reduced.
Compound ions · Reviewed lesson · version 1 · published 16 Nov 2026
Compound ions are ions with two or more different atoms. Examples are the sulfate ion, SO₄²⁻, and the nitrate ion, NO₃⁻.
Sample Problem 10.2
Calculate the oxidation number (Ox. No.) of sulphur in SO₄²⁻.
Solution
[Ox. No. of S] + 4 [Ox. No. of O] = -2
S + 4 (-2) = -2
S = +6
Thus, the oxidation number of sulphur in SO₄²⁻ is +6.
Sample Problem 10.3
Calculate the oxidation number (Ox. No.) of manganese in KMnO₄.
Solution
(Ox. No. of K) + (Ox. No. of Mn) + 4 (Ox. No. of O) = 0
+1 + Mn +4 (-2) = 0
(+1) + Mn – 8 = 0
Or Mn = + 7
Thus, the oxidation number (Ox. No.) of Mn in KMnO₄ is + 7.
10.13 Standard electrode potential
10.13 Standard Electrode Potential · Reviewed lesson · version 1 · published 16 Nov 2026
The voltage of an electrochemical cell will also depend on concentration, temperature, and pressure of the gas. Therefore, we should use standard conditions when comparing electrode potentials.
These are:
concentration of ions at 1.00 mol dm⁻³
a temperature of 25 °C (298 K)
any gases should be at a pressure of 1 atmosphere (101 kPa)
the value of the electrode potential of the half-cell is measured relative to the standard hydrogen electrode.
Under these conditions, the electrode potential we measure is called the standard electrode potential. This has the symbol, E°. It is spoken of as ‘E standard’.
“The standard electrode potential for a half-cell is the voltage measured under standard conditions with a standard hydrogen electrode (SHE) as the other half-cell”.
10.20 Activity series of metals and ease of oxidation
10.20 Activity Series of Metals and Ease of Oxidation · Reviewed lesson · version 1 · published 16 Nov 2026
The activity series of metals is a ranking of metals based on their reactivity, particularly their tendency to lose electrons and undergo oxidation. Metals higher in the activity series have more negative standard reduction potentials, meaning they are more likely to lose electrons and undergo oxidation. Hence such metals act as reducing agents. Metals at the top of the series are the most reactive with water, oxygen and acid. For example, alkali metals like cesium and sodium are highly reactive and oxidize readily, reacting vigorously with substances like water to form ions and release hydrogen gas.
In contrast, metals lower in the activity series, such as noble metals like gold and silver, do not oxidize easily. They are less reactive and do not readily lose electrons, that is why they do not react with water.
Metals at the bottom of the series are the least reactive with water, oxygen and acid. Thus, the position of a metal in the activity series directly correlates with its ease of oxidation and overall reactivity. Conversely, metals lower in the activity series have more positive standard reduction potentials, indicating a greater tendency to gain electrons and undergo reduction. Hence such metals act as oxidizing agents.
Activity series of metals is actually reactivity series.
Thus, the activity series can be understood in terms of standard reduction potentials: metals with more negative potentials are more reactive and oxidize more readily, while those with more positive potentials are less reactive and oxidize less readily as given in Table 10.2.
10.22.2 Merits of photovoltaic cell as sustainable source of energy
10.22.2 Merits of Photovoltaic Cell as Sustainable Source of Energy · Reviewed lesson · version 1 · published 16 Nov 2026
i.The photovoltaic effect continues as long as light is present, making it a sustainable method for generating electricity.
ii.A photovoltaic system is a renewable energy source that converts sunlight into electrical energy.
iii.The photovoltaic systems use the sun’s energy, making them a sustainable energy source that is independent of fossil fuels.
10.6 Electrolytic Cell · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 62 KB
An electrolytic cell is a device that converts electrical energy into chemical energy through a process called electrolysis. It consists of two electrodes, typically made of metal or another conductive material, which are immersed in an electrolyte-a substance containing free ions that carry electric current.
Figure 10.1: Main parts of an electrolytic cell (original drawing after the textbook's Figure 10.1).
When a direct electric current is applied, one electrode becomes negatively charged (the cathode) and the other positively charged (the anode).
In an electrolytic cell, positive ions in the electrolyte migrate towards the cathode, where they gain electrons (a reduction process), while negative ions move towards the anode, where they lose electrons (an oxidation process). This movement of ions and transfer of electrons results in chemical changes at the electrodes, effectively converting electrical energy into chemical energy.
Electrolytic cells are used in the electrolysis of sodium chloride to produce sodium metal and chlorine gas, the refining and plating of metals, and the production of chemicals like caustic soda. Electrolysis is also used to produce non-metals such as chlorine and to purify metals. Electrolysis is generally carried out in an electrolysis cell as shown in
10.2.1 Oxidation number rules
10.2.1 Oxidation Number Rules · Reviewed lesson · version 1 · published 16 Nov 2026
The oxidation number of any atom or ion can be deduced by using oxidation number rules. It is important to note that an oxidation number refers to a single atom in a compound.
i.The oxidation number of any uncombined element is zero. For example, the oxidation number of each atom in S₈, H₂, Cl₂, Na, Mg and Zn is zero.
ii.In either a compound or an ion, the more electronegative element is given the negative oxidation number. In HF, fluorine has -1 oxidation number.
iii.In compounds, many atoms or ions have fixed oxidation numbers, group 1 alkali metals are always +1, group 2 alkaline earth elements are always +2, group 17 halogens in binary compounds are always –1, hydrogen is +1 (except in metal hydrides, such as NaH, where it is –1), oxygen is –2 (except in peroxides, where it is –1, and in F₂O, where it is +2).
iv.The oxidation number of an element in a mono-atomic ion is always the same as the charge on the ion, for example, Cl⁻ is –1, Al³⁺ is +3.
v.The sum of the oxidation numbers in a compound is zero. In neutral molecules, the algebraic sum of the oxidation numbers of all the elements is zero. HCl and NaCl.
vi.In ions, the algebraic sum of oxidation number equals the charge on the ion. For examples CO₃⁻² and SO₄⁻².
While applying the oxidation number rules in the following examples, ‘Ox. No.’ as an abbreviation for oxidation number is used.
10.22.1 Principle of photovoltaic cells
10.22.1 Principle of Photovoltaic Cells · Reviewed lesson · version 1 · published 16 Nov 2026
The central principle behind the operation of PV cells is the photovoltaic effect, which involves the generation of voltage and electric current in a material upon exposure to light. The photovoltaic effect involves the excitation of electrons from the valence band to the conduction band in semiconductors, facilitated by the energy from photons. This process is improved by the presence of a PN junction, which separates the electrons and holes, creating a voltage that drives an electric current.
10.9 Amount of substance produced during electrolysis
10.9 Amount of Substance Produced during Electrolysis · Reviewed lesson · version 1 · published 16 Nov 2026
The value of F can be used to calculate the mass of substance deposited at an electrode and the volume of gas produced at an electrode.
Sample Problems 10.5
Calculate the mass of lead (Pb) deposited at the cathode during electrolysis when a current of 1.50 A flows through molten lead(II) bromide (PbBr₂) for 20.0 min. (relative atomic mass, Ar value: [Pb] = 207; F = 96500 C mol⁻¹)
Solution:
Step 1 Write the half-equation for the reaction.
Pb²⁺(aq) + 2e⁻ → Pb(s)
Step 2 Find the number of coulombs required to deposit 1 mole of product at the electrode.
2 moles of electrons are required per mole of Pb formed
= 2F
= 2 × 96500
= 193000 C mol⁻¹
Step 3 Calculate the charge transferred during the electrolysis.
Q = I × t = 1.50 × 20 × 60 = 1800 C
10.10.1 Finding the charge on 1 mole of electrons
10.10.1 Finding the Charge on 1 Mole of Electrons · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 82 KB
Figure 10.2: Apparatus for calculating the mass of copper deposited (original drawing after the textbook's Figure 10.2).
The charge on 1 mole of electrons can be found from a simple electrolytic experiment. The apparatus for this is shown in Figure 10.2.
The procedure is to weigh the pure copper anode and pure copper cathode separately arrange the apparatus during the electrolysis of aqueous copper(II) sulfate as shown in Figure 10.2. The variable resistor is used to keep the current constant pass about 0.2 amperes. Pass a constant electric current for a measured time interval, e.g., 40 min. Remove the cathode and anode and wash and dry them with distilled water and then with propanone. Reweigh the cathode and anode.
The cathode increases in mass because copper is deposited. The anode decreases in mass because the copper goes into solution as copper ions. The decrease in the mass of the anode is measured. This is preferred because the copper does not always stick to the cathode very well.
10.18 Variation of E Value with Ion Concentration · Reviewed lesson · version 1 · published 16 Nov 2026
The position of an equilibrium reaction is affected by changes in concentration, temperature and pressure. If we change the concentration or temperature of half-cell X, the electrode potential also changes. Under these non-standard conditions we use the symbol E for the electrode potential. Let us take an example of a metal/metal ion equilibrium:
Table 10.1 Variation of Potential with Ion Concentration
[Fe³⁺] (mol dm⁻³)
[Fe²⁺] (mol dm⁻³)
E° (V)
Effect
> 1.00
1.00
+ 0.85
More positive
< 1.00
1.00
+ 0.70
Less positive
10.15 Electrochemical cell (galvanic cell)
10.15 Electrochemical Cell (Galvanic Cell) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
A cell in which the conversion of chemical energy into electrical energy takes place spontaneously in exothermic redox process with oxidation at anode and reduction at cathode. A galvanic cell is designed to take advantage of spontaneous transfer of electrons. A Galvanic Cell, is also known as a Voltaic Cell. For example: Daniel cell and dry cell etc.
For example:ZnX2+X(aq)+2eX−ZnX(s)voltage=−0.76V
swipeFor example: Zn²⁺(aq) + 2e⁻ → Zn(s) voltage = –0.76 V
10.12 Standard hydrogen electrode
10.12 Standard Hydrogen Electrode · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 98 KB
The standard hydrogen electrode is one of several types of half-cell that can be used as reference electrode. Figure 10.4 shows a standard hydrogen electrode.
This electrode consists of:
Hydrogen gas at 101 kPa pressure, in equilibrium with H⁺ ions of concentration 1.00 mol dm⁻³
A platinum electrode covered with platinum black in contact with the hydrogen gas and the H⁺ ions.
Figure 10.4: Standard hydrogen electrode (SHE) (original drawing after the textbook's Figure 10.4).
The platinum black is finely divided platinum, which allows close contact of hydrogen gas and H⁺ ions in solution so that equilibrium between H₂ gas and H⁺ ions is established quickly. The platinum electrode is inert so it does not take part in the reaction. Standard electrode potential E° values for all half-cells are measured relative to this electrode.
When connected to another half-cell, the value read on the voltmeter gives the standard electrode potential for that half-cell. The half-equation for the hydrogen electrode can be written:
2HX+X(aq)+2eX−HX2X(g)E∘=0.00V
swipe2H⁺(aq) + 2e⁻ → H₂(g) E° = 0.00 V
10.21 Feasibility of redox reactions from activity series or reaction data
10.21 Feasibility of Redox Reactions from Activity Series or Reaction Data · Reviewed lesson · version 1 · published 16 Nov 2026
The activity series is actually a reactivity series of metals, in order of reactivity from highest to lowest. It is used to determine the products of single displacement reactions; whereby metal M₁ will replace another metal M₂ in a solution if M₁ is higher in the series.
From the activity series of metals, we can determine whether the reaction is feasible or not. We sum up the potentials of half reactions, if potential of the cell is positive, the reaction is possible if negative, the reaction is not feasible. Let us see the reactions:
FeX2+X(aq)+2eX−FeX(s)E(ox)∘=−0.44V
swipeFe²⁺(aq) + 2e⁻ ⇌ Fe(s) E°(ox) = – 0.44 V
10.8 Mass of a substance deposited during electrolysis
10.8 Mass of a Substance Deposited during Electrolysis · Reviewed lesson · version 1 · published 16 Nov 2026
The mass of a substance produced at an electrode during electrolysis is proportional to the time over which a constant electric current pass and the strength of the electric current.
Combining current and time, we get the relationship:
Q=I×t
swipeQ = I × t
Where Q = Charge (in coulombs, C)
I = Current (in amperes, A)
t = Time (in seconds, s)
The mass of a substance produced at (or removed from) an electrode during electrolysis is proportional to the quantity of electricity (in coulombs) which passes through the electrolyte.
10.17.2 Feasibility of a reaction using E° values
10.17.2 Feasibility of a Reaction Using E° Values · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.4 MB
Standard electrode potential values, E°, give us a measure of how easy or difficult it is to oxidize or reduce a species. The E° values are listed in order of increasingly negative values. For each half-equation, the more oxidized form is on the left and the more reduced form is on the right.
The more positive the value of E°, the greater the tendency for the half-equation to proceed in the forward direction, and the easier it is to reduce the species on the left of the half-equation.
The less positive the value of E°, the greater the tendency for the half-equation to proceed in the reverse direction, and the easier it is to oxidize the species on the right of the half-equation.
To check the feasibility of reaction between Mg²⁺ and Ag
MgX2++Ag?
swipeMg²⁺ + Ag → ?
10.10 Avogadro's constant by the electrolytic method
10.10 Avogadro's Constant by the Electrolytic Method · Reviewed lesson · version 1 · published 16 Nov 2026
The Avogadro constant, L, is the number of specified particles (atoms, molecules, or ions) in 1 mole. An electrolytic method can be used to find a value for the Avogadro constant by calculating the charge associated with 1 mole of electrons.
L=Charge on 1 electronCharge on 1 mole of electrons
swipeL = Charge on 1 mole of electrons / Charge on 1 electron
The charge on the electron can be calculated by experiment. The results show us that the charge on the electron is approximately 1.60 × 10⁻¹⁹ C.
10.2.2 Finding oxidation number of an element in a compound or a radical
10.2.2 Finding Oxidation Number of an Element in a Compound or a Radical · Reviewed lesson · version 1 · published 16 Nov 2026
The oxidation number or state of any atom of an element present in a compound or a radical can be determined by making use of the above-mentioned rules.
Compounds of a metal with a non-metal
A metal always has the positive Ox. No. and nonmetals have the negative Ox. state For example, in sodium sulfide, Na₂S:
2(+1)+S=0
swipe2(+1) + S = 0
+2+S=0
swipe+2 + S = 0
10.5 Balancing of redox equations by oxidation number method
10.5 Balancing of Redox Equations by Oxidation Number Method · Reviewed lesson · version 1 · published 16 Nov 2026
Carry out the following steps for balancing of redox equations by oxidation number method:
i.Write down the skeleton equation of the redox reaction under consideration.
ii.Identify the elements, which undergo a change in their oxidation number during the reaction.
iii.Record the oxidation number above the symbols of the element, which have undergone a change in the oxidation number.
iv.Indicate the change in oxidation number by arrows joining the atoms on both sides of the equation. It shows number of electrons gained or lost.
v.Equate the increase or decrease in the oxidation number, i.e., electrons gained or lost by multiplying with a suitable digit.
vi.Balance the rest of the equation by inspection (hit and trial) method.
10.17.1 Direction of electron flow
10.17.1 Direction of Electron Flow · Reviewed lesson · version 1 · published 16 Nov 2026
We can deduce the direction of electron flow in the wires in the external circuit by comparing the E° values for the two half-cells which make up the electrochemical cell. For example, in Figure 10.9 these voltages are:
AgX+X(aq)+eX−AgX(s)E∘=+0.80V
swipeAg⁺(aq) + e⁻ ⇌ Ag(s) E° = +0.80 V
10.4 Oxidizing agent (oxidant) and reducing agent (reductant)
10.4 Oxidizing Agent (Oxidant) and Reducing Agent (Reductant) · Reviewed lesson · version 1 · published 16 Nov 2026
An oxidizing agent (atom, ion or molecule) is that substance which oxidizes some other substance, and is itself reduced to a lower oxidation state by gaining one or more electrons, while, a reducing agent (atom, ion or molecule) is that substance which reduces some other substance, and is itself oxidized to a higher oxidation state by losing one or more electrons.
If an element M gains one or more electrons and is converted into M⁻ anion, the element M is said to be acting as an oxidizing agent, since it withdraws an electron from the other atom, in this process oxidation number of M has decreased that is:
For oxidizing agent:[Ox. No.=0](Higher Oxidation State)X+eX−[Ox. No.=−1](Lower Oxidation State)XX−
10.11 Electrode potentials (ease of oxidation and reduction)
10.11 Electrode Potentials (Ease of oxidation and reduction) · Reviewed lesson · version 1 · published 16 Nov 2026
During the redox processes, a redox equilibrium exists between two chemically related species that are in different oxidation states. When a metal is put into a solution of its ions, an electric potential (voltage) is established between the metal and the metal ions in solution. This is called electrode potential and it indicates the ease of oxidation or reduction of a substance. For example, when a copper rod is placed in contact with an aqueous solution of its ions, the following equilibrium exists:
CuX2+X(aq)+2eX−CuX(s)
swipeCu²⁺(aq) + 2e⁻ ⇌ Cu(s)
10.7 Redox reactions in electrolysis
10.7 Redox Reactions in Electrolysis · Reviewed lesson · version 1 · published 16 Nov 2026
During electrolysis, the positive ions (cations) move to the cathode. When they reach the cathode, they gain electrons from the cathode.
For example,
CuX2+X(aq)+2eX−CuX(s)
swipeCu²⁺(aq) + 2e⁻ → Cu(s)
10.1 Oxidation, reduction, and redox reactions
10.1 Oxidation, Reduction, and Redox Reactions · Reviewed lesson · version 1 · published 16 Nov 2026
10.3 Disproportionation reaction
10.3 Disproportionation Reaction · Reviewed lesson · version 1 · published 16 Nov 2026
A disproportionation reaction is a chemical reaction where a single substance acts as both the oxidizing and reducing agent, resulting in two different products with different oxidation states. This type of reaction involves the simultaneous oxidation and reduction of the same element.
For example, the decomposition of hydrogen peroxide (H₂O₂) to form water (H₂O) and oxygen (O₂) is a disproportionation reaction:
2HX2OX2HX2OX2X−1+OX2X0
swipe2H₂O₂ → H₂O₂⁻¹ + O₂⁰
10.19 Nernst equation
10.19 Nernst Equation · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 73 KB
If we consider a cell made up from a silver/silver ion electrode and a copper/copper(II) ion electrode, the reaction taking place is:
10.17.3 Oxidising and reducing agents using E° values
10.17.3 Oxidising and Reducing Agents Using E° Values · Reviewed lesson · version 1 · published 16 Nov 2026
Look back at Figure 10.11. Note the following as the values of E° for each of these reduction reactions gets more negative.
The species on the left of the equation become weaker oxidizing agents. They accept electrons less readily.
The species on the right of the equation become stronger reducing agents. They release electrons more readily.
Cu will not reduce Zn²⁺ ions to Zn. So how can we reduce Zn²⁺ ions? The answer is to react the Zn²⁺ ions with a stronger reducing agent, which should have an E° value more negative than the E° value for Zn²⁺/Zn. In Figure 10.13 we see that the half-equation Mg²⁺/Mg has a more negative E° value. So, Mg is a suitable reducing agent.
ZnX2+X(aq)+eX−ZnX(s)E∘=−0.76V
swipeZn²⁺(aq) + e⁻ → Zn(s) E° = –0.76 V
10.10.2 Calculating charge on an electron
10.10.2 Calculating charge on an electron · Reviewed lesson · version 1 · published 16 Nov 2026
A sample calculation is shown below, using a current of 0.20 A for 34 min.
mass of anode at start of the experiment=56.53g
swipemass of anode at start of the experiment = 56.53 g
mass of anode at end of experiment=56.40g
swipemass of anode at end of experiment = 56.40 g
10.14 Measuring standard electrode potentials
10.14 Measuring Standard Electrode Potentials · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
There are three main types of half-cell whose E° value can be obtained when connected to a standard hydrogen electrode (SHE):
metal/metal ion half-cell (Cu²⁺/Cu⁰)
non-metal/non-metal ion half-cell (Cl¹⁻/Cl₂)
ion/ion half-cell. (Fe²⁺/Fe³⁺)
Figure 10.5 shows how to measure the E° value for a Cu²⁺/Cu half-cell. The Cu²⁺/Cu half-cell is connected to the SHE and the voltage measured. The voltage is +0.34 V. The copper is the positive terminal (positive pole) of the cell and the SHE is the negative terminal. The two half-equations are:
Figure 10.5: Measuring the standard electrode potential of a Cu2+/Cu half-cell (original drawing after the textbook's Figure 10.5).
CuX2+X(aq)+2eX−CuX(s)E∘=+0.34V
swipeCu²⁺(aq) + 2e⁻ → Cu(s) E° = +0.34 V
10.16 Calculation of standard potential (E cell)
10.16 Calculation of Standard Potential (E cell) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
We can use E° values to calculate the voltage of an electrochemical cell made up of two half-cells, even when neither of them is a standard hydrogen electrode. The voltage measured is the difference between the E° values of the two half-cells. We call this value the standard cell potential (E°Cell).
For the electrochemical cell shown in Figure 10.8 (a), the two relevant half-equations are:
the electrolyte is the compound that is decomposed; it is either a molten ionic compound or a concentrated aqueous solution of ions
the electrodes are, made from either carbon (graphite) or metal, which conduct electricity to and from the electrolyte – the anode is the positive electrode – the cathode is the negative electrode
the power supply must be direct current.
The actual structure of the cell will vary according to the element extracted.
• Hydrogen shows -1 oxidation state with all metals.
• Hydrogen shows +1 oxidation state with all non-metals.
• Oxygen shows negative oxidation state with all metals.
• Oxygen shows negative oxidation state with all non-metals except fluorine
• Oxygen shows -2, -1 and -1/2 in H₂O, Na₂O₂, and KO₂ respectively.
If [Zn²⁺] is greater than 1.00 mol dm⁻³, the value of E becomes less negative / more positive (say −0.61 V).
If [Zn²⁺] is less than 1.00 mol dm⁻³, the value of E becomes more negative / less positive (say −0.80 V).
Le-Chatelier’s principle can be applied to redox equilibria. If we increase the concentration of the species on the left of the equation, the position of equilibrium will shift to the right. So, the value of E becomes more positive / less negative change in concentration of ions and its effect on E° is shown in Table 10.1. If two different ions are present in the half-cell, we have to consider both ions. Let us take the equilibrium between Fe³⁺ ions and Fe²⁺ ions as an example.
In order to measure the electrode potential relating to the half-equation
CuX2+X(aq)+2eX−CuX(s)
swipeCu²⁺(aq) + 2e⁻ → Cu(s)
A pure copper rod is placed in a solution of Cu²⁺(aq) ions (for example copper(II) sulfate solution). This Cu²⁺/Cu system is called a half-cell.
The following standard conditions are used to make the half-cell:
the Cu²⁺(aq) ions have a concentration of 1.00 mol dm⁻³
the temperature is 25 °C (298 K)
the copper rod must be pure.
If we connect two half-cells together, we have made an electrochemical cell. We can measure the voltage between these two half-cells. Figure 10.7 shows a Cu²⁺/Cu half-cell connected to a Zn²⁺/Zn half-cell to make a complete electrochemical cell.
Half-cells are connected together using:
wires connecting the metal rods in each half-cell to a high-resistance voltmeter; the electrons flow round this external circuit from the metal with the more negative (or less positive) electrode potential to the metal with the less negative (or more positive) electrode potential
Figure 10.7: An electrochemical cell, made by connecting a Cu2+/Cu half-cell to a Zn2+/Zn half-cell (original drawing after the textbook's Figure 10.7).
a salt bridge to complete the electrical circuit allowing the movement of ions between the two half-cells so that ionic balance is maintained; a salt bridge does not allow the movement of electrons.
A salt bridge can be made from a strip of filter paper (or other inert porous material) soaked in a saturated solution of potassium nitrate.
The voltages for the half-cells in Figure 10.7 can be represented by the following half-equations:
CuX2+X(aq)+2eX−CuX(s)E∘=+0.34V
swipeCu²⁺(aq) + 2e⁻ → Cu(s) E° = +0.34 V
ZnX2+X(aq)+2eX−ZnX(s)E∘=−0.76V
swipeZn²⁺(aq) + 2e⁻ → Zn(s) E° = –0.76 V
An electrochemical cell is made by connecting a Cu²⁺/Cu half-cell to a Zn²⁺/Zn half-cell. The relative values of these voltages tell us that Zn²⁺ ions are more difficult to reduce than Cu²⁺ ions. The voltage generated by this cell is +1.10 V.
The way that the half-equation is balanced makes no difference to the value of E°. The equation does not affect the tendency for the element to gain electrons. Its voltage is arbitrarily fixed at 0.00 V.
The quantity of electricity is often expressed in terms of a unit called the
Faraday
(symbol F). 1
Faraday
is the quantity of electric charge carried by 1 mole of electrons or 1 mole of singly charged ions. Its value is 96500 C mol⁻¹.
During the electrolysis of silver nitrate solution, silver is deposited at the cathode.
1molAgX+X(aq)+1moleX−1molAgX(s)
swipeAg⁺(aq) + e⁻ → Ag(s) (1 mol, 1 mol, 1 mol)
1 Faraday of electricity (96500 C) is required to deposit 1 mole of silver. During the electrolysis of copper(II) sulfate solution, copper is deposited at the cathode.
1molCuX2+X(aq)+2mol2eX−1molCuX(s)
swipeCu²⁺(aq) + 2e⁻ → Cu(s) (1 mol, 2 mol, 1 mol)
The equation shows that 2 moles of electrons are needed to produce 1 mole of copper from Cu²⁺ ions. So, it requires 2 Faradays of electricity (2 × 96500 C) to deposit 1 mole of copper.
No. of Faraday=No. of moles of electrons gained or lost
swipeNo. of Faraday = No. of moles of electrons gained or lost
Negative value of E°cell indicates the reaction is not feasible. On the other hand reaction between Ag⁺ and Mg is feasible as for this reaction E°cell will be positive as given below.
Figure 10.9: Standard electrode potentials for some oxidizing and reducing agents (original drawing after the textbook's Figure 10.9).
Zn has a greater tendency to lose electrons than Cu, so the chemical reaction that proceeds in this half-cell is in the reverse direction:
ZnX(s)ZnX2+X(aq)+2eX−
swipeZn(s) → Zn²⁺(aq) + 2e⁻
We can combine these two half-equations to show the direction of the reaction in the electrochemical cell as a whole.
ZnX(s)+CuX2+X(aq)ZnX2+X(aq)+CuX(s)
swipeZn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s)
This is the reaction taking place in the electrochemical cell. The reaction between zinc metal and copper ions is feasible. If the forward reaction is feasible, the reverse reaction (between Cu metal and zinc ions) is not feasible.
If a piece of copper metal is placed directly into a 1.00 mol dm⁻³ solution of Zn²⁺ ions, no reaction takes place. The half-equations, the direction of the reaction is given by a clockwise pattern reactant, product, reactant, product) starting from the top left as shown in Figure 10.10 for the cell made from the two half-cells Cu²⁺/Cu and Zn²⁺/Zn.
Figure 10.10: A reaction occurs in a direction so that the stronger oxidizing agent reacts with the stronger reducing agent (original drawing after the textbook's Figure 10.10).
In compounds containing two different non-metals, the sign of the Ox. No. depends on the electronegativity of each atom. The most electronegative element is given the negative sign.
Sample Problem 10.1
Find the oxidation No. of S in Sulfur dioxide, SO₂.
Ox. No. of each O atom = –2
For two oxygen atoms = 2 × (–2) = –4
SO₂ has no charge, so the total Ox. No. is zero. So,
a) If an element in a species undergoes only increase in oxidation number or decrease in oxidation number in a reaction. The species containing such element is written once on the RHS of the equation.
Zn(s) + HCl(aq) → ZnCl₂(aq) + H₂(g)
b) If an element in a species undergoes both increase in oxidation number or decrease in oxidation number simultaneously in a reaction (as in case of self-redox or disproportionation reaction). The species containing such element is written twice on the RHS of the equation. First for increase in oxidation number while second is written for decrease in oxidation number.
Cl₂ + NaOH + Cl₂ → NaCl + H₂O + NaOCl
c) If an element in a species undergoes increase or decrease in oxidation number as well as no change in oxidation number in a reaction. The species containing such element is also written twice. First, for change in oxidation number while second is for no change in oxidation number.
HNO₃ + Cu + HNO₃ → Cu(NO₃)₂ + H₂O + NO₂
HCl + K₂Cr₂O₇ + HCl → Cl₂ + KCl + CrCl₃ + H₂O
Sample Problem 10.4
Balance the following equation by oxidation number method.
K₂Cr₂O₇ + HCl → KCl + CrCl₃ + Cl₂ + H₂O
Solution:
1-Write down the skeleton of chemical equation.
K₂Cr₂O₇ + HCl → Cl₂ + KCl + CrCl₃ + H₂O
2-Write down the oxidation number of each element.
Here, Cr undergoes a change in oxidation state from +6 to +3 and it is reduced (acts as an oxidizing agent) while Cl undergoes a change in oxidation state from -1 to 0 and it is oxidized (acts as a reducing agent).
4.Write two half reactions separately i.e., reduction and oxidation reactions
K₂Cr⁶⁺₂O₇ → 2Cr³⁺Cl₃ Half reduction reaction ....... (ii)
The relative values of these voltages tell us that Zn²⁺ ions are more difficult to reduce than Ag⁺ ions. So, Zn metal will lose electrons to the Ag⁺/Ag half-cell and Ag⁺ ions will accept electrons from the Zn²⁺/Zn half-cell. The electrons move through the wires in the external circuit. They do not travel through the electrolyte solution. So, the electron flow is from the Zn²⁺/Zn half-cell to the Ag⁺/Ag half-cell. In other words, the flow is from the negative pole to the positive pole. Remember that the more positive pole attracts the negative electrons.
On other hand, if an element M loses one electron and is converted to M⁺ cation, the element M is said to be acting as a reducing agent, since it is providing electrons, it gets higher oxidation state. Thus,
For reducing agent:[Ox. No.=0](Lower Ox. No.)M[Ox. No.=+1](Higher Ox. No.)MX++eX−
There are two opposing reactions in this equilibrium.
a)Metal atoms from the rod entering the solution as metal ions. This leaves electrons behind on the surface of the electrode.
CuX(s)CuX2+X(aq)+2eX−
swipeCu(s) → Cu²⁺(aq) + 2e⁻
b)Ions in solution accepting electrons from the metal rod and get deposited as metal atoms on the surface of the electrode.
CuX2+X(aq)+2eX−CuX(s)
swipeCu²⁺(aq) + 2e⁻ → Cu(s)
The redox equilibrium is established when the rate of electron gain equals the rate of electron loss.
For unreactive metals such as copper, if this equilibrium is compared with the equilibrium set up by other metals, the equilibrium set up by copper lies further over to the right.
CuX2+X(aq)+2eX−CuX(s)
swipeCu²⁺(aq) + 2e⁻ → Cu(s)
Cu²⁺(aq) ions are therefore relatively easy to reduce. They gain electrons readily to form copper metal.
For reactive metals such as vanadium, the equilibrium lies further over to the left.
VX2+X(aq)+2eX−VX(s)
swipeV²⁺(aq) + 2e⁻ ← V(s)
V²⁺(aq) ions are therefore relatively difficult to reduce. They gain electrons much less readily by comparison. The position of equilibrium differs for different combinations of metals placed in solutions of their ions.
Gain of electrons is reduction and it always occurs at the cathode. If metal atoms are formed, they may be deposited as a layer of metal on the cathode. Alternatively, they may form a molten layer in the cell. If hydrogen gas is formed, it bubbles off.
The negative ions (anions) move to the anode. When they reach the anode, they lose electrons to the anode. Loss of electrons is oxidation. Oxidation always occurs at the anode.
For example:
2ClX−X(aq)ClX2X(g)+2eX−
swipe2Cl⁻(aq) → Cl₂(g) + 2e⁻
4OHX−X(aq)OX2X(g)+2HX2OX(l)+4eX−
swipe4OH⁻(aq) → O₂(g) + 2H₂O(l) + 4e⁻
Electrolysis is a redox reaction. For example, when molten zinc chloride (ZnCl₂) is electrolyzed, the electrode reactions are:
Cathode:ZnX2+X(l)+2eX−ZnX(s)(Reduction)
swipeCathode: Zn²⁺(l) + 2e⁻ → Zn(s) (Reduction)
Anode:2ClX−X(l)ClX2X(s)+2eX−(Oxidation)
swipeAnode: 2Cl⁻(l) → Cl₂(s) + 2e⁻ (Oxidation)
The electron loss at the anode balances the electron gain at the cathode. The overall reaction is
ZnClX2X(l)ZnX(s)+ClX2X(g)
swipeZnCl₂(l) → Zn(s) + Cl₂(g)
Quick Check 10.4
Molten copper (II) bromide (CuBr₂) is electrolyzed using inert electrodes.
The branch of chemistry which deals with inter conversion of electrical and chemical energy i.e., electrical energy into chemical energy and chemical energy into electrical energy is called electrochemistry.
Oxidation is a process involving loss of electron or electrons.
FeX+2FeX+3+eX−
swipeFe⁺² → Fe⁺³ + e⁻
ZnX0ZnX+2+eX−
swipeZn⁰ → Zn⁺² + e⁻
Here Fe⁺² and Zn⁰ have lost electrons, therefore they are oxidized.
Reduction is a process involving gain of electron or electrons.
ClX0+eX−ClX−1
swipeCl⁰ + e⁻ → Cl⁻¹
CuX+2+2eX−CuX0
swipeCu⁺² + 2e⁻ → Cu⁰
In these examples, Cl⁰ and Cu⁺² have gained electrons; therefore, they are reduced.
Oxidation and reduction always take place together. The reactions in which this happens is called redox reactions.
There are two ways of finding out whether or not a substance has been oxidized or reduced during a chemical reaction:
Figure 10.11: Increasing the concentration of silver ions in the cell reaction (original drawing after the textbook's Figure 10.11).
When E°cell is plotted against concentration we obtain a graph as shown in Figure 10.11.
Note that we have plotted the value of Ecell (non-standard conditions for the cell as a whole) against the logarithm of the silver ion concentration. The above redox cell reaction makes the value of Ecell more positive.
The effect of concentration and temperature on the value of Ecell can be deduced using the Nernst equation. For a given electrode, e.g., a Cu(s)/Cu²⁺(aq) electrode, the relationship is:
Zn²⁺ is the better oxidizing agent. It is more likely to accept electrons than Mg²⁺ ions. Mg is the better reducing agent. It is more likely to release electrons than Zn.
Compounds can also act as oxidizing and reducing agents. For example KMnO₄ (+0.54V) K₂Cr₂O₇ (+1.33V) are oxidizing agent because of their higher E° values. Whereas, KI and FeSO₄ are reducing agents due to their lower E° values.
Few compounds, such as H₂O₂ can act both has oxidizing as well as reducing agents.
The E° values show us that Cu²⁺ ions are easier to reduce than H⁺ ions (they have a more positive E° value). Cu²⁺ ions are more likely to gain electrons than H⁺ ions. So Cu²⁺ ions will accept electrons from the H⁺/H₂ half-cell and H₂ will lose electrons to the Cu²⁺/Cu half-cell.
Figure 10.6 shows how to measure the E° value for a Zn²⁺/Zn half-cell. The voltage of the Zn²⁺/Zn half-cell is –0.76 V. Zinc metal is the negative terminal (negative pole) of the cell and the hydrogen electrode is the positive terminal.
The two half-equations are:
HX+X(aq)+eX−21HX2X(g)E∘=0.00V
swipeH⁺(aq) + e⁻ → 1/2 H₂(g) E° = 0.00 V
ZnX2+X(aq)+2eX−ZnX(s)E∘=−0.76V
swipeZn²⁺(aq) + 2e⁻ → Zn(s) E° = –0.76 V
The E° values show us that Zn²⁺ ions are more difficult to reduce than H⁺ ions (they have a more negative E° value). Zn²⁺ ions are less likely to gain electrons than H⁺ ions. So, Zn will lose electrons to the H⁺/H₂ half-cell and H⁺ ions will gain electrons from the Zn²⁺/Zn half-cell.
Figure 10.6: Measuring the standard electrode potential of a Zn2+/Zn half-cell (original drawing after the textbook's Figure 10.6).
From these two examples, we can see that:
Reduction takes place at the positive terminal of the cell. For example, in the Zn²⁺/Zn; H⁺/H₂ cell:
2HX+X(aq)+2eX−HX2X(g)
swipe2H⁺(aq) + 2e⁻ → H₂(g)
Oxidation takes place at the negative terminal of the cell. For example, in the Zn²⁺/Zn; H⁺/H₂ cell:
The voltage of this cell is +0.80 – (–0.76) = +1.56 V as in Figure 10.8 (b).
Figure 10.8: (a) An Ag+/Ag, Zn2+/Zn electrochemical cell, (b) The difference between +0.80 V and -0.76 V is +1.56 V (original drawing after the textbook's Figure 10.8).
Quick Check 10.7
The E° value for the Ag⁺/Ag half-cell is more positive than for the Zn²⁺/Zn half-cell. So, the Ag⁺/Ag half-cell is the positive pole and the Zn²⁺/Zn half-cell is the negative pole of the cell.