NMR detects nuclei with spin (1H, 13C) flipping in a magnetic field. Chemical shift relative to TMS reveals the chemical environment; peak areas give relative proton numbers; n+1 splitting reveals neighbouring protons; D2O shake identifies O-H/N-H. 13C NMR counts distinct carbon environments over 0-220 ppm.
30.7.3 Determination of Structure of a Molecule · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 60 KB
The ¹³C NMR a spectrum can be used to figure out a molecule's structure. The steps during the analysis of a spectrum are:
1. Count the Peaks
The number of peaks in the spectrum tells the number of different types (environments) of carbon atoms in the molecule. If a molecule has 5 carbon atoms but only 3 peaks, it means there are 2 pairs of carbons, which are identical (chemically equivalent).
2. Look at the Position of Peak (Chemical Shift δ)
The position (ppm value) of each peak tells whether the carbon atom is present in an alkane, alkene, alkyne, aromatic or carbonyl compound. The assignment of the chemical shift value can be made according to the data provided in Table 30.3.
3. Work out the spectrum for possible structures
Use the information from the peak count and positions to draw possible structures that fit the molecular formula of the compound.
Figure 30.8: 13C NMR spectrum of an unknown molecule (original drawing after the textbook's Figure 30.8).
If the formula of a compound is C₄H₁₀O and its ¹³C NMR spectrum shows 3 peaks (Figure 30.8). It means that 3 different carbon environments are present in the molecule. The three possible molecules for this formula are butan-1-ol, butan-2-ol and 2-methoxypropane. The structure of the unknown compound cannot be butan-1-ol or butan-2-ol (which are expected to show 4 peaks). It must be a structure with 3 chemical environments; 2-methoxypropane which has 3 peaks.
30.6 Determination of the Possible Structure of a Molecule from ¹H NMR
30.6 Determination of the Possible Structure of a Molecule from ¹H NMR · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 74 KB
The structure of an unknown compound can also be deduced by analyzing its ¹H NMR spectrum. It can be done by putting together the following key pieces of information like a puzzle. To determine the structure:
Count the number of peaks in the spectrum. No. of peaks = No of protons
Use the chemical shift of each peak to identify functional groups (use data table).
Use peak area to find the actual number of hydrogen atoms for each peak (this gives the no. of hydrogen atoms present in each environment)
Analyze the splitting pattern and calculate the number of adjacent protons. No. of sub-peaks = n +1; n = No. of sub-peaks – 1
Combine this information to assemble the complete molecular structure.
Example 30.2
The ¹H NMR spectrum of an ester is given below. Deduce the structure of the ester.
Solution:
30.7.1 Chemical Environment of Carbon
30.7.1 Chemical Environment of Carbon · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 26 KB
A carbon atom's environment is determined by the types of atoms directly attached to it. Carbon atoms that are in the same environment are chemically equivalent, and show the same chemical shift. For example, both carbon atoms in ethane have the same environment. Carbon atoms in different environments are chemically non-equivalent and they will appear at different positions (chemical shifts) in ¹³C NMR spectra. For example, all three methyl carbon atoms in 2-methylpropane have the same environment, while the tertiary carbon has different environment than these three carbon atoms.
2-Methylpropane (original drawing after the structure printed in 30.7.1).
The type of environment can be predicted by looking at atoms or bonds around carbon atoms. The chemical shifts of different carbon environments are given in Table 30.3.
Table 30.3 Chemical shifts of different carbon environments
Hybridization of carbon atom
Environment of carbon atom
Examples
30.7 ¹³C NMR Spectroscopy
30.7 ¹³C NMR Spectroscopy · Reviewed lesson · version 1 · published 16 Nov 2026
The nucleus of ¹²C does not have magnetic properties because of even number of protons and neutrons (even mass number), and is, therefore, NMR inactive. However, the ¹³C nucleus possesses magnetic spin due to its odd number of neutrons. On the basis of the magnetic properties of carbon-13 isotope, ¹³C NMR spectra can be recorded for carbon compounds. Like ¹H NMR, chemical shift (δ in ppm) in ¹³C NMR is compared to the reference molecule TMS (δ = 0.0 ppm). However, the ¹³C NMR has a range of chemical shift from 0 – 220 ppm. The deuterated chloroform (CDCl₃) is usually used as a solvent which produces a small signal near 80 ppm.
Introduction · Reviewed lesson · version 1 · published 16 Nov 2026
Nuclear Magnetic Resonance (NMR) spectroscopy is a powerful technique which is extensively used in chemistry, polymer industry, study of proteins and natural products, environment monitoring, and medical field. In chemistry, this technique is particularly used for the identification of organic compounds and determination of their structures. Proton (¹H) NMR and carbon-13 (¹³C) NMR are two most commonly used methods in this regard.
30.4.1 Low-Resolution ¹H NMR Spectra · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 98 KB
A low-resolution ¹H NMR spectrum provides three main pieces of information about the structure of a compound; the number of different proton environments in the molecule, types of these environments, and the relative number of protons in each environment. While interpreting a ¹H NMR spectrum, three parameters are carefully analysed; total number of peaks in the spectrum, position of each peak (chemical shift δ), and the area under each peak. The number of peaks in a ¹H NMR spectrum corresponds to the number of different chemical environments for protons present in the molecule. Each peak in the spectrum stands for a different chemical environment.
Figure 30.4: Low-resolution 1H NMR spectrum of ethanol (original drawing after the textbook's Figure 30.4).
Low-resolution ¹H NMR spectrum of ethanol (CH₃CH₂OH) has been illustrated in Figure 30.4. The spectrum has three peaks which shows that there are three different proton environments in ethanol molecule i.e., the CH₃ protons, the CH₂ protons, and the OH proton.
Chemical shift of each peak corresponds to the type of chemical environment of protons giving rise to that peak. The type of proton environment can be identified by comparing the chemical shifts to standard values (
30.3 Chemical Environment and Chemical Shift (δ)
30.3 Chemical Environment and Chemical Shift (δ) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
Chemical shift is an important parameter in NMR spectroscopy and represents the position of a signal relative to a reference compound. Tetramethylsilane, Si(CH₃)₄ (commonly known as TMS) is used as the standard reference and its signal is assigned a value of 0.0 ppm. All other signals due to the hydrogen nuclei (protons) in the sample compounds are measured relative to this TMS zero point. The position of a peak in a ¹H NMR spectrum relative to TMS peak is called the chemical shift (δ) which is measured in parts per million (ppm) unit. Chemical shift indicates the electronic environment of a proton. Protons in different environments have different δ values, while those lying in same environment have same δ value.
Tetramethylsilane (TMS) (original drawing after the structure in the book's Did You Know box).
30.1 Principle of Proton (¹H) NMR
30.1 Principle of Proton (¹H) NMR · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 98 KB
Figure 30.1: Alignment of nuclei in a magnetic field and spin flipping (original drawing after the textbook's Figure 30.1).
NMR spectroscopy is based on the magnetic properties (nuclear spin) of nuclei. Atoms with odd mass numbers usually show signals on NMR. The atomic nuclei of these atoms, such as hydrogen (¹H) and carbon-13 (¹³C) behave like a tiny magnet. In the absence of a magnetic field, all the nuclei have random orientation and have the same energy. When placed in a strong magnetic field, these nuclei align themselves either with or against the field and give rise to two spin states i.e., low energy state and high energy state (Figure 30.1).
30.4 Interpretation of ¹H NMR Spectra
30.4 Interpretation of ¹H NMR Spectra · Reviewed lesson · version 1 · published 16 Nov 2026
30.2 Solvents for NMR Spectroscopy · Reviewed lesson · version 1 · published 16 Nov 2026
In the ¹H NMR analysis the sample to be analyzed is dissolved in excess solvent to prepare a solution. Ordinary solvents contain hydrogen atoms which produce strong signals and cause interference in the spectrum of the sample. To avoid this problem, deuterated solvents such as CDCl₃ (deuterated chloroform) or CD₃OD (deuterated methanol), are used. If regular CHCl₃ is used as a solvent, the signal from its single proton (¹H) would be intense enough to completely overlap and mask the weaker signals arising from the protons in the actual sample. In CDCl₃, hydrogen (H) is replaced with its isotope Deuterium (D). Deuterium requires a different frequency of radio waves for flipping, hence it neither absorbs radio frequency provided to the sample solution nor its peak appears in the ¹H NMR spectrum. This makes the solvent "silent", and only the signals of the sample are observed in the spectrum.
30.7.2 Predicting ¹³C NMR Spectra · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 34 KB
The ¹³C NMR spectrum is simpler than ¹H NMR in which each peak (or signal) corresponds to a single, different environment or type of carbon atom. Chemical shift of each peak tells about its environment.
The number of peaks=The number of different carbon environments
swipeThe number of peaks = The number of different carbon environments
Figure 30.7: 13C NMR spectrum of ethanol (original drawing after the textbook's figure).
¹³C NMR spectrum of ethane shows only one peak as both the carbon atoms have the same environment. In propane
30.5 Prediction of ¹H NMR Spectrum for a Given Molecule
30.5 Prediction of ¹H NMR Spectrum for a Given Molecule · Reviewed lesson · version 1 · published 16 Nov 2026
After understanding the concepts of chemical environment, chemical shift and splitting of peaks, one can predict the ¹H NMR spectrum of a given molecule by analyzing its structure. This can be done in the following steps:
Step I: Identify different proton environments in the molecule.
Number of different environments=Number of peaks expected in spectrum
swipeNumber of different environments = Number of peaks expected in spectrum
Step II: Estimate the chemical shift (δ) for each set of protons having same chemical environment by using known ranges from the data table (Table 30.1). If the data table is not available, check the nearest bonds and atoms. The protons near electronegative elements have higher chemical shift (δ), while those with alkyl groups generally have lower chemical shift.
30.4.3 Identification of O-H and N-H Proton in ¹H NMR Spectrum
30.4.3 Identification of O-H and N-H Proton in ¹H NMR Spectrum · Reviewed lesson · version 1 · published 16 Nov 2026
The hydrogen atoms in O-H (alcohols or carboxylic acids) and N-H (amines or amides) are easily exchangeable, due to which they show a wide range of chemical shift value for their singlet peak.
30.4.2 High-Resolution ¹H NMR and Splitting of Peaks
30.4.2 High-Resolution ¹H NMR and Splitting of Peaks · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
The NMR signals of protons are not only affected by the nearby electrons, but also by protons on the adjacent atoms. This effect can be observed by a high-resolution NMR. When a high-resolution ¹H NMR spectrum of a molecule is studied, it reveals that each peak is often made up of a cluster of sub-peaks. This is due to the splitting of each signal due to the presence of protons (¹H) on adjacent carbon atoms. The splitting of signals into multiple peaks (e.g., doublets, triplets, quartets) indicates the number of protons (¹H) on the adjacent (neighbouring) carbon atom. Number of sub-peaks can be calculated by using 'n+1' rule. A signal usually splits into n+1 sub-peaks, where n is the number of protons on adjacent carbon atoms.
Number of sub-peaks=n+1
swipeNumber of sub-peaks = n+1
The solution is given in the table below.
Example 30.2: the 1H NMR spectrum of an ester (original drawing after the spectrum printed in Example 30.2).
Example 30.2: solution
No.
Peak Chemical Shift (ppm)
No. of Equivalent protons
Responsible Group
Splitting
No. of Neighbouring Protons
1
1.3
3H
-CH₃ next to -CH₂
Triplet
3-1 = 2H (CH₃-CH₂-)
2
2.2
3H
-CH₃ next to C=O
Singlet
1-1 = 0 (CH₃-C=O)
3
3.9
2H
CH₂- next to an electronegative O atom
doublet
2-1 = 1 (CH₃-CH₂-O) Combining information from 1 and 3
Overall Structure
H₃C–CO–O–CH₂–CH₃ (the C=O printed with its O above)
), the peak at 5.4 ppm represents the presence of electrons in less electron density environment (OH). The peak having chemical shift 3.7 ppm can be identified as –CH₂– next to oxygen while the signal at 1.2 ppm can be identified as methyl group (–CH₃ protons).
The area under each peak is proportional to the number of protons giving rise to that peak.
In the ¹H NMR spectrum of ethanol (Figure 30.4), peaks are labeled 1H, 2H and 3H to show relative peak areas in 1:2:3 ratio. This ratio matches with the number of protons in each environment (-OH has 1, –CH₂ has 2 and –CH₃ has 3 protons). Analysis of the above spectrum shows that there are three kinds of chemical environments for protons, so three signals are observed. The intensity ratio shows that they are present in the ratio of 1:2:3. The sum of number of each type of protons gives the total number of protons present in the molecule. Hence, there are total 6 hydrogen (1+2+3) atoms in an ethanol molecule.
Figure 30.2: 1H NMR Spectrum of Methanol (original drawing after the textbook's Figure 30.2).
For example, in the ¹H NMR spectrum of methanol (Figure 30.2), the relative position of peak for methyl (-CH₃) hydrogens at 3.35 ppm compared to 0.0 ppm of TMS is the chemical shift of these protons. Similarly, O-H hydrogen of methanol has a chemical shift of 4.80 ppm.
Protons (¹H) in a molecule are surrounded by electrons and this electron density affects the appearance of an NMR spectrum. Protons in different parts of a molecule are in different "environments" because of the atoms and bonds near them. All the protons (¹H) found in chemically identical environments within a molecule are chemically equivalent, and they exhibit the same chemical shift in the ¹H NMR spectra of that molecule. All the protons in TMS, methane, ethane, benzene and propanone (acetone) are chemically equivalent. Each of these compounds gives rise to a single absorption peak in its ¹H NMR spectrum (Figure 30.3).
All the hydrogen atoms in these molecules have same chemical environment (original drawing after the structures printed in 30.3).
Figure 30.3: 1H NMR spectrum of methane (original drawing after the textbook's Figure 30.3).
On the other hand, a molecule which has sets of protons that are chemically different from one another, have different chemical shift and give rise to more than one peaks.
Molecules having two and three different chemical environments for protons (original drawing after the boxes printed in 30.3).
For example, a proton on a -CH₃ group is different from the one on -CH₂- and O-H in ethanol (C₂H₅OH) molecule. Similarly, all the three protons of -CH₃ have same environment, while the two protons of -CH₂- have same environment. The chemical shift of a proton (¹H) is affected by the electron density of its surrounding chemical environment. Protons surrounded by high electron density (alkyl groups) have lower chemical shift values, whereas protons surrounded by a low electron density (near electronegative atoms like F, O, N, Cl etc.) appear at high chemical shift values. For example, methyl (-CH₃) protons in the ¹H NMR spectrum of methanol appear at 3.35 ppm due to a higher electron density around them as compared to O-H proton, which appears at 4.80 ppm due to the presence of electronegative oxygen next to it (Figure: 30.2).
A ¹H NMR spectrum has a chemical shift (δ) range of 0 – 12 ppm. The chemical shifts for different environments of protons have been given in Table 30.1. This data table is helpful in identifying and predicting the environment of protons in ¹H NMR spectrum of an unknown compound.
Table 30.1 Chemical shifts of some common types of protons
Environment of Proton
Examples
Chemical Shift Range δ (ppm)
Alkyl (alkanes)
–CH₃, –CH₂–, >CH–
0.5 – 1.5
Alkyl next to C=O (ketone/ester)
CH₃–C=O, –CH₂–C=O, >CH–C=O
2.0 – 2.6
Alkyl next to aromatic ring
CH₃–Ar, –CH₂–Ar, >CH–Ar
2.3 – 3.0
Alkyl next to electronegative atom (halogenoalkanes, alcohols)
By irradiating with radio waves, the nuclei at low energy state can absorb energy and move to higher energy state (spin flipping). When they return to their original states, they emit energy which is detected and converted into an NMR spectrum (plural spectra). The exact energy required to flip a nucleus depends upon its position in a compound and the surrounding atoms, collectively known as the molecular environment. Thus, NMR can be used to identify different hydrogen atoms lying in different environments within one molecule. For example, in the methanol (CH₃OH) molecule, three hydrogen atoms are attached to a carbon atom and one hydrogen atom is bonded to an oxygen atom. The methyl (-CH₃) hydrogens and hydroxyl (O-H) hydrogen lie in different environment, so they absorb different amount of energy (different frequency of radio waves) for flipping.
Methanol (original drawing after the structure printed at the end of 30.1).
Nuclei lying in different environments can be flipped by using the radio waves of same frequency, if the strength of magnetic field is varied.
, there are two types of carbon environments, the two terminal -CH₃ carbons have the same environment while the middle -CH₂- carbon has a different environment. The ¹³C NMR spectrum of propane shows two peaks, one for the methyl carbon atoms while the other for -CH₂- carbon atom. Similarly, two peaks are observed in the ¹³C spectrum of ethanol (CH₃–CH₂–OH), due to the presence of two types of environments in this molecule (
Figure 30.7
).
Analyzing the ¹³C NMR spectrum of ethanol by using the data given in Table 30.3, it is evident that the peak at 18 ppm is for -CH₃ carbon, while the peak near 57 ppm is due to -CH₂- carbon atom.
There are two key differences between ¹H NMR and ¹³C NMR spectra. The relative peak area in ¹³C NMR is usually not proportional to the number of carbon atoms unlike ¹H NMR in which peak area shows the number of protons. Secondly, the peaks do not show splitting, hence these appear as vertical lines. Due to this, ¹³C NMR technique is less sensitive than ¹H NMR.
Step III: Predict the splitting pattern of each peak by applying the 'n+1' rule.
Step IV: Assign integration ratios according to the number of hydrogen atoms in each environment.
Example 30.1
Predict the ¹H NMR spectrum of chloroethane (CH₃-CH₂-Cl).
Solution:
No. of peaks
Two different chemical environments are present in the molecule.
No. of peaks in the ¹H NMR spectrum of chloroethane = 2
Chemical shift
The -CH₂- is attached to an electronegative element, it will show a higher value of chemical shift (3.0 – 4.5 ppm). The methyl protons will show lower value of chemical shift (0.5 – 1.5 ppm).
Splitting of Peaks
No. of sub-peaks for -CH₃ = 2 + 1 = 3 (The carbon adjacent to -CH₃ has 2 protons)
-CH₃ signal will split into a triplet.
No. of sub-peaks for -CH₂- = 3 + 1 = 4 (The carbon adjacent to -CH₂- has 3 protons)
-CH₂- signal will split into a quartet.
Relative peak area
The ratio of peak area for -CH₃ and -CH₂- will be 3:2.
Quick Check 30.5
For the compound (CH₃)₂CHOH, predict the following:
Sometimes, it becomes very difficult to identify these peaks in spectra. A technique known as 'deuterium exchange' or 'D₂O shake' is used to detect whether the singlet in a ¹H NMR spectrum is actually due to the presence of an O-H or N-H hydrogen. In this method, the ¹H NMR spectrum of the compound is recorded which shows all the H atoms in the molecule including the O–H or N–H proton(s). A few drops of D₂O are then added to the NMR sample tube, the solution is shaken well and its spectrum is recorded again. The peak belonging to O–H or N–H proton disappears in the second spectrum. Comparing both spectra confirms the identity of the peak arising due to N-H or O-H.
The reason for this observation is that protons (¹H) attached to highly electronegative atoms like O or N are easily exchanged. When D₂O is added to the sample solution, these hydrogens are quickly exchanged with the deuterium (D) atoms.
R−O−H+DX2OR−O−D+HOD
swipeR–O–H + D₂O ⇌ R–O–D + HOD
As deuterium atom requires different energy for spin flipping as compared to ¹H, it does not show a peak in the ¹H NMR spectrum making it 'invisible'.
(Where n = the number of protons on the adjacent carbon atom).
Figure 30.5: High-resolution 1H NMR spectrum of ethanol (original drawing after the textbook's Figure 30.5).
In the high-resolution ¹H NMR spectrum of ethanol, the -CH₃ peak is split into three sub-peaks (known as triplet) because the number of protons on adjacent carbon is 2 (2+1=3). Similarly, -CH₂- peak is split into four sub-peaks (known as a quartet) because there are 3 protons on its adjacent carbon (3+1=4). The -OH signal is not split because hydrogen is bonded to an oxygen atom instead of carbon atom (Figure 30.5).
Figure 30.6: High-resolution 1H NMR spectrum of ethane (original drawing after the textbook's Figure 30.6).
This is important to note that -OH and -NH protons usually do not show splitting, so these appear as singlet peak. Similarly, chemically equivalent protons do not cause splitting of their neighbouring protons. For example, the ethane (CH₃-CH₃) molecule has two methyl groups attached to each other. If one methyl group is considered, its adjacent carbon has 3 protons attached to it. However, the peak does not show splitting because all the hydrogen atoms in ethane are chemically equivalent (Figure 30.6).
The number of sub-peaks for different number of neighbouring protons and their appearance given in Table 30.2 is useful to recognise splitting patterns in high-resolution ¹H NMR spectra.
Table 30.2 Common splitting patterns in high-resolution ¹H NMR spectra
No. of Protons on Adjacent Carbon Atom (n)
Number of Sub-Peaks (n+1)
Splitting Pattern
Abbreviation
0
1
Singlet
s
1
2
Doublet
d
2
3
Triplet
t
3
4
Quartet
q
swipe
Table 30.2, Appearance of Split Peak (original drawing after the peak shapes printed in Table 30.2).