Amines are organic bases whose basicity depends on lone-pair availability (alkyl amines > NH3 > phenylamine). Phenylamine is diazotised to give diazonium salts that couple to form azo dyes. The unit also covers nitrile hydrolysis, amides (weakly basic due to resonance), and amino acids as zwitterions separated by electrophoresis and joined into peptides.
Basic Properties of Amides · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 40 KB
Amides are less basic than aliphatic amines. Unlike amines, amides form neutral solutions in water. They exhibit resonance where the lone pair on nitrogen participates in delocalization with oxygen of carbonyl group. This reduces the availability of electrons on nitrogen, thereby decreasing the basicity.
Resonance in an amide (original drawing after the textbook's unnumbered figure on PDF page 128).
C-N bond lengths in an amide and in an amine (original drawing after the textbook's unnumbered figure on PDF page 128).
The introduction of double bond character between carbon and nitrogen reduces the C—N bond length less than the usual C—N single bond length.
B) Aliphatic Secondary Amines · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 72 KB
i)Secondary amines can be prepared by the alkylation of primary amines. When a halogenoalkane reacts with a primary amine in the presence of ethanol under pressure secondary amine is formed.
Alkylation of methanamine with bromoethane (original drawing after the textbook's unnumbered figure on PDF page 121).
ii)Secondary amines are also prepared by the reduction of N-substituted amides
Reduction of N-methylethanamide to N-methylethanamine (original drawing after the textbook's unnumbered figure on PDF page 121).
24.3.3 Reactions of Phenylamine (Aromatic Amine)
24.3.3 Reactions of Phenylamine (Aromatic Amine) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.5 MB
Phenylamine gives two types of reactions:
Hybridisation in phenylamine: sp2 ring carbons and sp3 nitrogen atom (original drawing after the textbook's unnumbered figure on PDF page 124).
a)due to benzene ring
b)due to -NH₂ group
a) Reaction with bromine water
The amino group (–NH₂) is an ortho-para directing group. Therefore, the incoming electrophile attacks at “o” and “p” positions. The presence of the amino group makes benzene ring fairly reactive, especially at these position. Hence, bromination of phenylamine is faster than benzene, and its two ortho and the para positions, all are occupied in a single reaction.
Bromination of phenylamine to 2,4,6-tribromophenylamine (original drawing after the textbook's unnumbered figure on PDF page 125).
24.6.2 Separation of Amino Acids via Electrophoresis
24.6.2 Separation of Amino Acids via Electrophoresis · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Amino acids can be separated from each other by a variety of techniques. One method, called electrophoresis, is used to separate amino acid in a mixture based on their charge. In this technique, a few drops of the mixture are applied to a filter paper or gel that is placed in a buffered solution between two electrodes. When an electric field is applied, the amino acids separate based on their different pI values. If the pI of an amino acid is greater than the pH of the solution, the amino acid will exist predominantly in a form that bears a positive charge and will migrate toward the cathode. The greater the difference between pI and pH, the faster it will migrate. An amino acid with a pI that is lower than the pH of the solution exists predominantly in a form that bears a negative charge and will migrate toward the anode. The greater the difference between pI and pH, the faster it will migrate (Figure 24.2). If two amino acids have very similar pI values (such as glycine and leucine), the amino acid with the larger molecular weight will move more slowly, because the charge has to carry a greater mass.
Figure 24.2: Separations of amino acids at pH 6 by electrophoresis (original drawing after the textbook's Figure 24.2).
Amino acids are colorless, so a detection technique is necessary in order to visualize the location of the various spots. Ninhydrin is used as a locating agent, which reacts with amino acids to produce a purple product.
24.5 Amides
24.5 Amides · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Amides contain the functional group –CO–NH₂. Since they are prepared from carboxylic acids that is why amides are still sometimes called as “acid amides”.
Amides can be prepared by the following methods.
1. By the reaction of acyl chlorides with ammonia
Amides from acyl chlorides and ammonia (original drawing after the textbook's unnumbered figure on PDF page 127).
2. By the reaction of acyl chlorides with primary amines
Amides from acyl chlorides and primary amines (original drawing after the textbook's unnumbered figure on PDF page 127).
24.6.3 Peptides
24.6.3 Peptides · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 76 KB
Amino acid molecules can also react with each other. The acidic -COOH group in one amino acid molecule reacts with the basic-NH₂ group in another molecule. When two amino acids react together, the resulting molecule is called a dipeptide.
Formation of a dipeptide and the peptide link (original drawing after the textbook's unnumbered figure on PDF page 131).
Note that the shaded area is the amide bond between the two amino acids. An amide bond between two amino acid molecules is also called a peptide bond or peptide link. The reaction is a condensation reaction, as a small molecule, in this case water is eliminated when the reactant molecules join together.
Quick Check 24.5
The R groups in the amino acids aspartic acid and lysine are (-CH₂–COOH) and (-CH₂-(CH₂)₃NH₂) respectively.
C) Phenyl Amine (Aromatic Amine)
C) Phenyl Amine (Aromatic Amine) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
i.Phenyl amine can be prepared by ammonolysis of chlorobenzene. Ammonolysis is a reaction in which an ammonia molecule is broken down to react with another compound.
Ammonolysis of chlorobenzene to phenylamine (original drawing after the textbook's unnumbered figure on PDF page 121).
iii.Phenyl amine can also be prepared by the reduction of nitrobenzene.
Reduction of nitrobenzene to phenyl amine (original drawing after the textbook's unnumbered figure on PDF page 122).
iv.Phenyl amine can be prepared by the Hofmann reaction.
24.2 Preparation of Amines
24.2 Preparation of Amines · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
A) Aliphatic Primary Amines
i)Primary amines can be prepared by the nucleophilic substitution reactions of halogenoalkanes with ammonia. Excess of ethanolic ammonia under pressure is used to avoid the formation of secondary amines or a mixture of products.
Bromoethane and excess ammonia give ethanamine (original drawing after the textbook's unnumbered figure on PDF page 120).
ii)Primary amines are prepared by the reduction of alkanenitriles. For example, propanenitrile is reduced with H₂/Ni or LiAlH₄ ro prepare propane-1-amine
Reduction of propanenitrile to propan-1-amine (original drawing after the textbook's unnumbered figure on PDF page 120).
24.6 Amino Acids
24.6 Amino Acids · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 95 KB
Amino acids are an important group of compounds that contain:
the basic amino group (-NH₂), and
the acidic carboxylic acid group (-COOH).
This makes amino acids amphoteric, as they can behave as both an acid and a base. The general structure of amino acids (2-aminocarboxylic acid), also called α-amino acids, is shown as.
The general structure of an amino acid, its natural structure and its zwitter ionic structure (original drawing after the textbook's unnumbered figure on PDF page 129).
An α-amino acid exists as a dipolar ion called Zwitter ion, having a positive and a negative end within the same molecule. In the formation of a Zwitter ion, the proton goes from the carboxyl group to the amino group. The dipolar structure is also called the internal salt.
The R group is the part of the amino acid that can vary in different amino acids. The simplest amino acid is glycine (aminoethanoic acid) in which R is a hydrogen atom. Alanine (2-amino propanoic acid) is an amino acid in which the R group is the methyl group, -CH₃.
24.3.2 Distinction between Primary and Secondary Amines
24.3.2 Distinction between Primary and Secondary Amines · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Primary, secondary and tertiary aliphatic amines are identified and distinguished by reacting them with nitric (III) acid (nitrous acid). Primary amines react with nitrous acid to form diazonium salts. The process is called diazotization.
Ethanamine and nitrous acid give ethane diazonium chloride (original drawing after the textbook's unnumbered figure on PDF page 123).
Secondary amines form N-nitrosoamines (yellow oily liquid) on reaction with nitrous acid.
N-methylethanamine and nitrous acid give an N-nitrosoamine (original drawing after the textbook's unnumbered figure on PDF page 124).
Tertiary amines react with nitrous acid to form soluble salt.
N,N-dimethylethanamine and nitrous acid give a soluble nitrite salt (original drawing after the textbook's unnumbered figure on PDF page 124).
Reactions of Amides
Reactions of Amides · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Amides are the least reactive of all acid derivatives, because lone pair of nitrogen is delocalized over the oxygen of carbonyl group, thus decreasing the electrophilic power (+δ charge) of the carbonyl carbon.
Reactions of amides are generally slow and require prolonged heating or catalysts (acid or base) for them to take place. Some of them are given as under:
Acid hydrolysis of ethanamide (original drawing after the textbook's unnumbered figure on PDF page 128).
In the base-catalyzed reaction, the products are the salts of carboxylic acids and ammonia. The free carboxylic acid is obtained when this salt is treated with dilute hydrochloric acid.
Base hydrolysis of ethanamide and acidification of the salt (original drawing after the textbook's unnumbered figure on PDF page 129).
2. Reduction
24.3 Reactions of Amines
24.3 Reactions of Amines · Reviewed lesson · version 1 · published 16 Nov 2026
24.1 Amines · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.4 MB
Alkaline hydrolysis of nitriles
Alkaline hydrolysis of nitriles · Reviewed lesson · version 1 · published 16 Nov 2026
When a nitrile is heated with a dilute sodium hydroxide solution, a salt of carboxylic acid is produced, which on acidification with dilute hydrochloric acid gives free carboxylic acid.
24.6.1 Acidic and Basic Properties of Amino Acids · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 70 KB
Amino acids are amphoteric, i.e., they show both acidic and basic properties. However, they are less acidic than most carboxylic acids, and are less basic than most amines. In fact, the acidic part of the amino acid molecule is –NH₃⁺, group, not –COO⁻ group, and the basic part is -COO⁻ group, not –NH₂, group. RNH₃⁺ is a weaker acid than RCOOH, as shown below:
b) Reaction with Nitrous Acid and Formation of Azo Compounds
Phenylamine being a primary amine reacts with nitrous acid to form phenyldiazonium salt. This reaction is called diazotization. The organic compounds having diazonium ion, –N⁺≡N (diazo group) as a functional group are called diazo compounds. Both aliphatic and aromatic primary amines react with nitrous acid to yield diazonium salts. Nitrous acid is unstable and is prepared in situ by the reaction of sodium nitrite and HCl. The reaction mixture is kept below 10 °C using ice. This is because the diazonium salts are unstable and will decompose easily, giving off nitrogen gas, N₂, even at room temperature.
Diazotisation of phenylamine and hydrolysis of phenyldiazonium chloride to phenol (original drawing after the textbook's unnumbered figure on PDF page 125).
The alkyl diazonium salts are highly unstable under all conditions and therefore cannot be isolated. The aryl diazonium salts are however fairly stable at low temperatures. The extra stability of aromatic diazo compounds compared to aliphatic diazo compounds is due to the delocalization of the positive charge over the aromatic ring. Benzene diazonium salts are the important intermediates in the synthesis of many organic compounds.
Structure of benzene diazonium ion (original drawing after the textbook's unnumbered figure on PDF page 125).
Coupling reactions of diazonium compounds
The reactions of aryl diazonium salts with strongly activated aromatic compounds, such as phenols and amines, are called coupling reactions. The products of such reactions containing a –N=N– bond are called azo compounds. In the coupling reaction, the positively charged diazonium ion acts as an electrophile. It substitutes into the benzene ring of phenol at the para position.
Coupling of benzenediazonium chloride with phenol (original drawing after the textbook's unnumbered figure on PDF page 126).
Mechanism
Mechanism of the coupling of the diazonium ion with phenol (original drawing after the textbook's unnumbered figure on PDF page 126).
Formation of Dyes
Coupling reaction can be used to form different types of azo dyes. p-Dimethylaminoazo benzene is called Butter yellow, which was previously used in food. However, due to its carcinogenic nature, its use in food is now forbidden.
Formation of butter yellow (original drawing after the textbook's unnumbered figure on PDF page 126).
Methyl orange is an acid-base indicator and is prepared from diazotized sulfanilic acid and N, N-diamethylphenylamine as follows.
Formation of methyl orange (original drawing after the textbook's unnumbered figure on PDF page 126).
The azo group (Ph-N=N-Ph) in azo dyes is called a chromophore. This group is responsible for the intense colour of the dyes ranging from yellow and orange to red, blue and green depending upon what other groups are attached to the benzene rings.
Different food colours often contain azo dyes (original drawing after the photograph printed in the textbook).
Quick Check 24.4
Azo dyes are the coloured compounds which are prepared by the reaction of diazonium salt of phenylamine and some aryl compound having activated benzene ring.
Reaction of an amino acid with ninhydrin (original drawing after the textbook's unnumbered figure on PDF page 131).
Electrophoresis cannot be used to separate large quantities of amino acids. It is used just as an analytical method for determining the number of amino acids in a mixture. In order to actually separate an entire mixture of amino acids, other laboratory techniques are used, such as column chromatography.
In the above two methods, all the reactions take place at room temperature, releasing white fumes of hydrogen chloride (HCl). The HCl produced reacts with another molecule of ammonia or amine to form a salt.
Salt formation by an amine and by ammonia with HCl (original drawing after the textbook's unnumbered figure on PDF page 128).
Therefore, an excess of ammonia or amine is used to ensure complete reaction.
• Identify the reactions (reagents and conditions) by which amides are produced (some examples include: a) The reaction between ammonia and an acyl chloride at room temperature; b) The reaction between a primary amine and an acyl chloride at room temperature).
• Describe the reactions of amides (some examples include: a) Hydrolysis with aqueous alkali or aqueous acid; b) The reduction of the CO group in amides with LiAlH₄ to form an amine).
• Explain why amides are much weaker bases than amines.
• Describe the acid / base properties of amino acids and the formation of zwitterions.
• Describe the formation of amide (peptide) bonds between amino acids to give di- and tripeptides.
• Predict the results of electrophoresis on mixtures of amino acids and dipeptides at varying pHs.
Organic nitrogen compounds are essential to life and the modern world. They form the basis of life in the form of amino acids and nucleotides, making the most vital compounds for life, i.e. proteins. Amines and nitro compounds have the pivotal significance in the dye industry and medicines. Nylon, Kevlar®, and polyurethane are the nitrogen containing polymers, which are found in every home and office. Apart from these, nitrogen compounds are also part of our food, fertilisers, explosives, etc.
Caffeine and theobromine, with coffee beans and chocolate (original drawing after the textbook's unnumbered figure and photographs on PDF page 119).
Amines are considered as organic derivatives of ammonia, where alkyl or aryl groups may replace one, two or three hydrogen atoms of ammonia. The number of hydrogen atoms replaced by alky or aryl groups provides a foundation for the classification of amines as primary, secondary and tertiary amines. In the primary amines one alky or aryl group is attached to -NH₂ group. In IUPAC nomenclature system, amines are referred to as alkanamines.
Primary amines: methanamine, ethanamine, propan-1-amine and phenyl amine (aniline) (original drawing after the textbook's unnumbered figure on PDF page 119).
In secondary amines, two alky or aryl groups are attached to NH group e.g.
Secondary amines: N-methylmethanamine, N-methylethanamine and diphenyl amine (original drawing after the textbook's unnumbered figure on PDF page 119).
In tertiary amines, three alkyl or aryl groups are attached to the same nitrogen atom e.g.
Tertiary amines: N,N-dimethylmethanamine and triphenylamine (original drawing after the textbook's unnumbered figure on PDF page 119).
Tetra-substituted nitrogen derivatives are also known, and are termed as quaternary ammonium salts e.g.
Tetramethylammonium chloride, a quaternary ammonium salt (original drawing after the textbook's unnumbered figure on PDF page 120).
In the aqueous solution, an equilibrium exists between the dipolar ion and a cationic and an anionic form of an amino acid.
Cationic form, dipolar ion and anionic form of an amino acid (original drawing after the textbook's unnumbered figure on PDF page 130).
For each amino acid, there is specific pH at which the concentration of the zwitter ion reaches its maximum value. This pH is called the isoelectric point (pI), and each amino acid has its own unique pI.
The basicity of amines depends on the availability of the “lone pair” of electrons on the nitrogen atom. Reactions of different amines and ammonia with water show their pKb values. The Larger the Kb (or smaller the pKb), the stronger is the base. It is clear that electron-donating alkyl groups attached to the nitrogen atom increase the basicity of amines, whereas the electron-withdrawing groups decrease it. Basicity is also an indicator of the stronger nucleophilic character of a compound, mostly. Following this, we can infer that:
Figure 24.1: Delocalisation of the nitrogen lone pair in phenylamine (original drawing after the textbook's Figure 24.1).
Etahanamine is a stronger base than ammonia and methanamine (primary amine). Likewise, alkyl amines are stronger base than ammonia as well.
Ammonia is a stronger base than aromatic amines like phenyl-amine. This is because in phenylamine, the lone pair of electrons on the nitrogen atom is delocalized over the benzene ring as shown in Figure 24.1. The nitrogen atom is planar, with its lone pair in a p orbital. This can overlap with the delocalized π electrons of benzene ring.
Table 24.1 The basicity of some amines
Sr.No.
Amine
Formula
Kb
pKb
1
Ammonia
NH₃
1.8 × 10⁻⁵
4.75
2
Ethanamine
CH₃–CH₂–NH₂
5.1 × 10⁻⁴
3.29
3
Phenylamine (Aniline)
C₆H₅–NH₂
4.2 × 10⁻¹⁰
9.38
swipe
Ammonia and ethanamine react with an acid to form salts due to their basic nature. In this reaction, the nitrogen atom donates an electron pair to form a dative bond with a proton, forming a salt.
Preparation of alkanenitriles has been given in chapter 21.
Alkanenitriles are important compounds in many chemical reactions. However, the most important applications of alkanenitriles is their hydrolysis to produce carboxylic acids through hydrolysis. Hydrolysis of nitriles can occur with both dilute acid and dilute alkali.