Builds vector algebra (components, scalar and vector products), derives the three equations of motion algebraically and graphically, applies them to free fall and projectile motion, then develops linear momentum, impulse, conservation of momentum, elastic and inelastic collisions in one and two dimensions, and rocket propulsion.
2.4 Equations of Motion · Reviewed lesson · version 1 · published 16 Nov 2026
Equations of motion can be used to describe the motion of an object in terms of its three kinematic variables: velocity (v), position (s) and time (t). There are three ways to pair these variables up: velocity-time, position-time and velocity-position. In this order they are called first equation of motion, second equation of motion and third equation of motion, respectively.
These equations of motion can only be applied to those objects which are moving in a straight line with constant acceleration.
2.8 Elastic and Inelastic Collisions · Reviewed lesson · version 1 · published 16 Nov 2026
When two tennis balls collide then, after collision, they will rebound with velocities less than the velocities before the impact. During this process, a portion of K.E. is lost, partly due to friction as the molecules in the ball move past one another when the balls distort and partly due to its change into heat and sound energies.
Under certain special conditions, no kinetic energy is lost in the collision.
For example, when a hard ball is dropped onto a marble floor, it rebounds to very nearly the initial height. It loses negligible amount of energy in the collision with the floor. It is to be noted that momentum and total energy are conserved in all types of collisions. However, the K.E. is conserved only in elastic collisions.
Graphical Representation of a Vector · Reviewed lesson · version 1 · published 16 Nov 2026
A good way to represent a vector quantity is to use a vector diagram, in which vectors are often represented by arrows. The length of the arrows indicates the magnitude and the head of the arrow shows the direction of the vector. Vectors are typically denoted by bold face letters (e.g; V, F) or an arrow head above symbol (A).
Basic Concept of Scalars and Vectors · Reviewed lesson · version 1 · published 16 Nov 2026
2.1 Scalars
2.1 Scalars · Reviewed lesson · version 1 · published 16 Nov 2026
Scalars are physical quantities that are described solely by a magnitude (size or amount) without any mention of direction. Thus, scalars are directionless and can be fully characterized by a single number and its associated unit.
Examples:
Mass: The amount of matter in an object. For example, 2 kg.
Distance: The total length of path travelled by an object irrespective of the direction. For example, 50 m.
Speed: The rate at which an object covers distance. For example, 40 kmh⁻¹.
Time: The ongoing sequence of events taking place. For example, 20 seconds.
Energy: The capacity to do work. For example, 25 J.
Temperature: A measure of the average kinetic energy of particles in a substance. For example, 20°C.
2.9 Elastic Collision in Two Dimensions · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 84 KB
Figure 2.15: Elastic collision in two dimensions (original drawing after the textbook's Figure 2.15).
When two bodies travelling along an axis do not end up traveling along the same initial axis after collision, then it is a case of two-dimensional collision. When the collision is elastic, the system of bodies conserves both its total linear momentum and total kinetic energy.
Consider two bodies colliding elastically at a certain glancing angle, showing that the collision is not head-on. Let m₁ be the mass of the first body (projectile) moving with initial velocity v₁i and m₂ is the mass of the body second (target), which is initially at rest, v₂i = 0. As the two bodies collide together, the impulses generated between them, send these bodies off at angles θ₁ and θ₂ to the x-axis, along which the projectile initially travelled.
An elastic collision that is not a head-on collision between two bodies.
Initially, the body with mass m₂ (target), is at rest.
2.12 Rocket Propulsion · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Figure 2.18: Cut-away rocket (original drawing after the textbook's Figure 2.18).
Rockets move by expelling burning gas through engines at their rear. The ignited fuel turns to a high pressure gas which is expelled with extremely high velocity from the rocket engines (Fig. 2.18). The rocket gains momentum equal to the momentum of the gas expelled from the engine but in opposite direction. The rocket engines continue to expel gases after the rocket has begun moving and hence rocket continues to gain more and more momentum. So, instead of travelling at steady speed the rocket gets faster and faster so long the engines are operating.
Fuel and oxygen mix in the combustion chamber. Hot gases exhaust the chamber at a very high velocity. The gain in momentum of the gases equals the gain in momentum of the rocket. The gas and rocket push against each other and move in opposite directions.
A rocket carries its own fuel in the form of a liquid or solid hydrogen and oxygen. It can, therefore work at great heights where very little or no air is present. In order to provide enough upward thrust to overcome gravity, a typical rocket consumes about 10000 kg s⁻¹ of fuel and ejects the burnt gases at speeds of over 4000 m s⁻¹. In fact, more than 80% of the launch mass of a rocket consists of fuel only. One way to overcome the problem of mass of fuel is to make the rocket from several rockets linked together.
When one rocket has done its job, it is discarded leaving others to carry the space craft further up at ever greater speed.
2.10 Inelastic collision in one dimension
2.10 Inelastic Collision in One Dimension · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Figure 2.16: Perfectly inelastic collision in one dimension (original drawing after the textbook's Figure 2.16).
Consider two bodies having masses m₁ and m₂, moving with velocities v₁i and v₂i along the same line such that v₁i > v₂i. In such a case m₁ is regarded as projectile and m₂ as target. After time t both the bodies make inelastic collision and stick together. Let their combined mass become m₁ + m₂ which moves with final velocity vf after collision.
Since the collision is perfectly inelastic, the total momentum of balls is conserved. Using law of conservation of momentum.
Total momentum of system before collision=Total momentum of the system after collision
swipeTotal momentum of system before collision = Total momentum of the system after collision
Time of Flight
Time of Flight · Reviewed lesson · version 1 · published 16 Nov 2026
The time taken by body to cover the distance from the place of its projection to the place where it hits the ground is called the time of flight.
This can be obtained by taking S = h = 0, because body goes up and comes back to the same level, thus covering no vertical distance. If the body is projecting with velocity vi making angle θ with the horizontal, then its vertical component will be vi sinθ. Hence, the equation of motion is:
S=vit+21gt2
swipeS = vit + ½gt²
Kinetic Energy
Kinetic Energy · Reviewed lesson · version 1 · published 16 Nov 2026
Since collision is inelastic, the kinetic energy of colliding system is not conserved. The loss of kinetic energy is computed as follows:
Initial Kinetic Energy
The total initial kinetic energy K.Eᵢ of the system before the collision is:
(K.E)i=21m1v1i2+21m2v2i2(2.43)
swipe(K.E)i = ½m₁v₁i² + ½m₂v₂i² (2.43)
Rectangular Components of a Vector
Rectangular Components of a Vector · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 47 KB
A component of a vector is its effective value in a given direction. A vector may be considered as the resultant of its component vectors along the specified directions. It is usually convenient to resolve a vector into its components along the mutually perpendicular directions. Such components are called rectangular components.
Figure 2.1: Rectangular components of vector A (original drawing after the textbook's Figure 2.1).
Let there be a vector A represented by a line OP making an angle θ with the x-axis. Draw projection OM of vector A on x-axis and projection ON of vector A on y-axis as shown in Fig.2.1. Projection OM being along x-direction represented by Ax and projection ON along y-direction is represented by Ay. By applying head to tail rule:
A=Ax+Ay(2.1)
swipeA⃗ = A⃗x + A⃗y (2.1)
Derivation of First Equation of Motion By Graphical Method
Derivation of First Equation of Motion By Graphical Method · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 54 KB
First equation of motion can be derived using velocity time graph for an object moving with initial velocity vi, final velocity vf and constant acceleration a.
Let the velocity of a body at point A is vi which changes to vf at point B in time interval t as shown in Fig.2.5. A perpendicular BD is drawn from point B to x-axis and another perpendicular BE from B on y-axis, such that
OA=vi=Initial velocity of the body
swipeOA = vi = Initial velocity of the body
Impulse
Impulse · Reviewed lesson · version 1 · published 16 Nov 2026
Sometimes we wish to apply the concept of momentum to cases where the applied force is not constant, it acts for very short time. For example, when a bat hits a cricket ball, the force certainly varies from instant to instant during the collision. In such cases, it is more convenient to deal with the product of force and time (F × t) instead of either quantity alone. The product of average force F that acts during time t is called impulse given by
Impulse=F×t=mvf−mvi(2.27)
swipeImpulse = F⃗ × t = mv⃗f - mv⃗i (2.27)
Law of Conservation of Momentum
Law of Conservation of Momentum · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
Figure 2.9: Two balls before, during and after a collision (original drawing after the textbook's Figure 2.9).
Let us consider an isolated system. It is a system on which no external agency exerts any force. For example, the molecules of a gas enclosed in a glass vessel at constant temperature constitute an isolated system. The molecules can collide with one another because of their random motion, but being enclosed by glass vessel, no external agency can exert a force on them.
Consider an isolated system of two smooth hard interacting balls of masses m₁ and m₂, moving along the same straight line, in the same direction, with velocities v₁ and v₂ respectively. Both the balls collide and after collision, ball of mass m₁ moves with velocity v₁′ vand m₂ moves with velocity v₂′ in the same direction as shown in Fig. (2.9).
To find the change in momentum of mass m₁, Using Eq. (2.27) as:
F×t=m1v1′−m1v1
swipeF⃗ × t = m₁v₁′ - m₁v₁
Elastic Collisions in One Dimension
Elastic Collisions in One Dimension · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.8 MB
Figure 2.10: Elastic collision in one dimension, before and after (original drawing after the textbook's Figure 2.10).
Consider two smooth, non-rotating balls of masses m₁ and m₂ moving initially with velocities v₁ and v₂ respectively, in the same direction. They collide and after collision, they move along the same straight line without rotation. Let their velocities after the collision be v′₁ and v′₂ respectively, as shown in Fig.(2.10).
We take the positive direction of the velocity and momentum to the right. By applying the law of conservation of momentum we have
m1v1+m2v2=m1v1′+m2v2′
swipem₁v₁ + m₂v₂ = m₁v₁′ + m₂v₂′
2.7 Momentum
2.7 Momentum · Reviewed lesson · version 1 · published 16 Nov 2026
We are aware of the fact that moving object possesses a quality by virtue of which it exerts a force on anything that tries to stop it. The faster the object is travelling, the harder is to stop it. Similarly, if two objects move with the same velocity, then it is more difficult to stop the massive of the two. This quality of the moving body was called the quantity of motion of the body, by Newton. This term is now called linear momentum p of the body and is defined by the relation:
p=mv(2.25)
swipep⃗ = mv⃗ (2.25)
2.11 Inelastic collision in two dimensions
2.11 Inelastic Collision in Two Dimensions · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 95 KB
The macroscopic collisions are generally inelastic and do not conserve Kinetic energy.
The perfect inelastic collision is one in which the colliding objects stick together to make a single mass after collision. Its analysis can be carried out as follows:
Figure 2.17: Perfectly inelastic collision in two dimensions (original drawing after the textbook's Figure 2.17).
Let us take two rigid bodies having masses m₁ and m₂ moving with velocities, v₁i and v₂i, respectively, in a two-dimensional xy-plane. Assume that the first body is moving along the x-axis while the second body moves in a direction, making an angle θ with x-axis. Both the bodies collide at the origin as shown in the figure 2.17.
After collision, bodies stick together, having combined mass M = m₁ + m₂, which moves with velocity vf, making an angle φ with x-axis. Now resolve v₂i into rectangular components v₂i sinθ and v₂i cosθ. Also resolve vf into components v
Characteristics of Cross Product
Characteristics of Cross Product · Reviewed lesson · version 1 · published 16 Nov 2026
Since A x B is not the same as B x A, the cross product is non commutative. so,
A×B=B×A
swipeA⃗ × B⃗ ≠ B⃗ × A⃗
Range of the projectile
Range of the projectile · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Maximum distance which a projectile covers in the horizontal direction is called the range of the projectile.
Paths of projectiles fired at 30°, 45° and 60° (Do You Know; original drawing after the textbook's graph).
To determine the range R of the projectile, we multiply the horizontal component of the velocity of projection with total time taken by the body to hit the ground after leaving the point of projection. Thus
R=vix×t
swipeR = vix × t
Characteristics of Scalar Product
Characteristics of Scalar Product · Reviewed lesson · version 1 · published 16 Nov 2026
Since A.B = AB cosθ and B.A = BA cos θ = AB cos θ, hence, A.B = B.A. The order of multiplication is irrelevant. In other words, scalar product is commutative.
The scalar product of two mutually perpendicular vectors (θ = 90°) is zero.
A⋅B=ABcos90∘=0
swipeA⃗.B⃗ = AB cos 90° = 0
Derivation of First Equation of Motion
Derivation of First Equation of Motion · Reviewed lesson · version 1 · published 16 Nov 2026
Suppose a body is moving with uniform acceleration along a straight line with an initial velocity vi. Let its velocity changes from initial value vi to a final value vf in time interval t. Then the acceleration produced in the body during this time interval is given as
a=tvf−vi
swipea = (vf - vi)/t
Determination of a Vector from its Rectangular Components
Determination of a Vector from its Rectangular Components · Reviewed lesson · version 1 · published 16 Nov 2026
If the rectangular components of a vector as shown in Fig.(2.1) are given, we can find out the magnitude of the vector by using Pythagorean Theorem.
In the right angle ΔOMP
(OP)2=(OM)2+(MP)2
swipe(OP)² = (OM)² + (MP)²
Scalar or Dot Product
Scalar or Dot Product · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 82 KB
The scalar product of two vectors A and B is written as A.B and is defined as
A⋅B=ABcosθ(2.6)
swipeA⃗.B⃗ = AB cos θ (2.6)
Examples of Vector Product
Examples of Vector Product · Reviewed lesson · version 1 · published 16 Nov 2026
i.When a force F is applied on a rigid body at a point whose position vector is r from any point on the axis about which the body rotates, then the turning effect of the force called the torque τ is given by the vector product of r and F.
τ=r×F
swipeτ⃗ = r⃗ × F⃗
2.5 Motion under gravity
2.5 Motion Under Gravity · Reviewed lesson · version 1 · published 16 Nov 2026
A body falling freely under the action of gravity is the most familiar example of uniformly accelerated rectilinear motion. According to Galileo, all bodies fall freely (in vacuum) under the acceleration due to gravity, denoted by 'g'. Its experimental value is 9.8 m s⁻² in SI units. This means that different bodies, when allowed to fall from the same height, strike the ground with the same velocity. As regards the sign of g, it is taken positive for a falling body (when initial velocity is zero) and negative for a body projected vertically upward (when initial velocity is not zero).
The equations of motion for a freely falling body, on putting a = g, become
vf=vi+gt
swipevf = vi + gt
Vector or Cross Product
Vector or Cross Product · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.4 MB
The vector product of two vectors A and B, is a vector which is defined as
A×B=ABsinθn^(2.9)
swipeA⃗ × B⃗ = AB sin θ n̂ (2.9)
Derivation of third equation of motion
Derivation of third equation of motion · Reviewed lesson · version 1 · published 16 Nov 2026
Consider a body moving along a straight line with an initial velocity vi which attains a final value vf in time t. Let the displacement of the body be S during this time interval. Then we can write
swipeDisplacement = ((Initial velocity + Final velocity)/2) × Time
Energy Loss in the Collision
Energy Loss in the Collision · Reviewed lesson · version 1 · published 16 Nov 2026
Since the collision is inelastic, there is a loss in kinetic energy, represented by ΔK.E.
ΔK.E.=(K.E.)i−(K.E.)f
swipeΔK.E. = (K.E.)i - (K.E.)f
2.6 Projectile motion
2.6 Projectile Motion · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Figure 2.8(a): Ball thrown horizontally from a height (original drawing after the textbook's Figure 2.8(a)).
Uptill now we have been studying the motion of a particle along a straight line i.e., motion in one dimension. Now we consider the motion of a ball, when it is thrown horizontally from certain height. It is observed that the ball travels forward as well as falls downward, until it strikes something such as ground. Suppose that the ball leaves the hand of the thrower at point A (Fig 2.8-a) and that its velocity at that instant is completely horizontal. Let this velocity be vx. According to Newton's first law of motion, there will be no acceleration in horizontal direction, unless a horizontally directed force acts on the ball. Ignoring the air friction, only force acting on the ball during flight is the force of gravity. There is no horizontal force acting on it. So its horizontal velocity will remain unchanged and will be vx, until the ball hits ground. The horizontal motion of ball is simple. The ball moves with constant horizontal velocity component. Hence horizontal distance x is given by
x=vx×t(2.17)
swipex = vx × t (2.17)
Height of the Projectile
Height of the Projectile · Reviewed lesson · version 1 · published 16 Nov 2026
In order to determine the maximum height the projectile attains, we use the equation of motion:
2aS=vf2−vi2
swipe2aS = vf² - vi²
Derivation of Second Equation of Motion by Graphical Method
Derivation of Second Equation of Motion by Graphical Method · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 54 KB
Figure 2.6: Velocity-time graph (original drawing after the textbook's Figure 2.6).
Second equation of motion can be derived using velocity-time graph for a body moving with initial velocity vi which attains a final value vf in time interval t. While moving with constant acceleration a it covers a displacement S in time t.
It can be seen from the graph that distance travelled by the body is, S = v × t.
AlsoS=Area of the figure OABD
swipeAlso S = Area of the figure OABD
Derivation of Second Equation of Motion
Derivation of Second Equation of Motion · Reviewed lesson · version 1 · published 16 Nov 2026
Suppose a body is moving with uniform acceleration a along a straight line with an initial velocity vi, which become vf after time interval t. Let it covers a distance S in a particular direction during time t, then using the definition of velocity as rate of change of displacement, we can write
Velocity=Displacement/Time
swipeVelocity = Displacement/Time
orDisplacement=Velocity×time
swipeor Displacement = Velocity × time
Conservation of Momentum
Conservation of Momentum · Reviewed lesson · version 1 · published 16 Nov 2026
The initial momentum of projectile before collision is m₁v₁i while initial momentum of target before collision is zero. The final momentum of projectile having mass m₁ and velocity v₁f after collision is m₁v₁f. The final momentum of target having mass m₂ and velocity v₂f after collision is m₂v₂f. Resolve final momentum of projectile into components m₁v₁f cosθ₁ and m₁v₁f sinθ₁. Similarly, resolve the final momentum of target into components m₂v₂f cosθ₂ and m₂v₂f sinθ₂.
Momentum conservation along x-axis is:
Momentum before collision=Momentum after collision
swipeMomentum before collision = Momentum after collision
m1v1i=m1v1fcosθ1+m2v2fcosθ2
swipem₁v₁i = m₁v₁f cos θ₁ + m₂v₂f cos θ₂
Momentum and Newton's Second Law of Motion
Momentum and Newton's Second Law of Motion · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Point to Ponder (PDF page 38): (a) a foot kicking a stone, 1/100 second; (b) a foot kicking a football, 1/10 second (original drawing after the textbook's figure in this box).
Consider a body of mass m moving with an initial velocity vi. Suppose an external force F acts upon it for time t after which velocity becomes vf. The acceleration a produced by this force is given by
a=tvf−vi
swipea = (vf - vi)/t
Derivation of third Equation of Motion by Graphical method
Derivation of third Equation of Motion by Graphical method · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 54 KB
In the speed time graph shown in the figure, the total distance S travelled by a body is given by the area OABD under the graph, such that
S=21(Sum of parallel sides)×Height
swipeS = ½(Sum of parallel sides) × Height
Solving for Final Velocity and Angle
Solving for Final Velocity and Angle · Reviewed lesson · version 1 · published 16 Nov 2026
Magnitude of Final Velocity vf:
The magnitude of the final velocity vf can be found by squaring and then adding equations (2.39) and (2.40).
swipevf = √([(m₁v₁i cos θ₁ + m₂v₂i cos θ₂)/M]² + [(m₁v₁i sin θ₁ + m₂v₂i sin θ₂)/M]²) (2.41)
Conservation of Energy
Conservation of Energy · Reviewed lesson · version 1 · published 16 Nov 2026
21m1v1i2=21m1v1f2+21m2v2f2
swipe½m₁v₁i² = ½m₁v₁f² + ½m₂v₂f²
Scalars and vectors are basic concepts in physics. Many problems in physics require to distinguish between scalar and vector quantities to apply the correct mathematical and conceptual approaches. Understanding scalars and vectors help us to grasp how physics applies to real-world situations, such as calculating the total distance travelled (scalar) or determining the magnitude and direction of force (vector). Learning these concepts develops critical thinking and problem-solving skills. This chapter is primarily concerned with vector algebra and its application in uniform accelerated motion, in a straight line, motion of freely falling bodies in uniform gravitational field, projectile motion, and interaction between objects in one and two dimensions.
If m is the mass of the gases ejected per second with velocity v relative to the rocket, the change in momentum per second of the ejecting gases is mv. This equals the thrust produced by the engine on the body of the rocket. So, the acceleration 'a' of the rocket is
a=Mmv(2.42)
swipea = mv⃗/M (2.42)
where M is the mass of the rocket. When the fuel in the rocket is burned and ejected, the mass M of rocket decreases and hence the acceleration increases.
This is the amount of kinetic energy lost during inelastic collision. From the forgoing analysis, it is clear that energy is lost during an inelastic collision in one dimension.
Example 2.10
A projectile of mass 2 kg is moving with an initial velocity of 4 m s⁻¹ towards right and hits the target at rest of mass 3 kg, after collision the two masses stick together and move as single body with a velocity of 1.6 m s⁻¹. Show law of conservation of momentum and energy losses during perfect inelastic collision.
Solution: Initial momentum in x-direction
pₓ = m₁v₁ₓ + m₂v₂ₓ As v₂ₓ = 0
= (2 kg × 4 m s⁻¹) + (3 kg × 0) = 8 kg m s⁻¹
As the combined mass is M = m₁ + m₂ = 2 kg + 3 kg = 5 kg
and the final velocity is vfx = 1.6 m s⁻¹
Final momentum is
M vfx = 5 kg × 1.6 m s⁻¹ = 8 kg m s⁻¹
Initial K.E. = ½m₁v₁i² + ½m₂v₂i²
= ½ × 2 kg × (4 m s⁻¹)² + ½ × 3 kg × 0
= 16 kg m² s⁻² + 0 = 16 J
Final K.E. = K.E final = ½(m₁ + m₂)vf²
= ½ × 5 kg × (1.6 m s⁻¹)² = 6.4 kg m² s⁻² = 6.4 J
Energy Loss = K.E initial - K.E final
= 16 J - 6.4 J = 9.6 J
This is valid example of a perfectly inelastic collision in 2D, where the two bodies stick together after collision showing that momentum is conserved but kinetic energy is lost.
Thus, Ax and Ay are the comoponants of vector A. Since these are at right angle to each other, they are called rectangular components of A. Considering the right angled triangle OMP, the magnitude of Ax or x-component of A is:
Since the action force F is equal and opposite to the reaction force F′, we have F′ = -F, or F + F′ = 0 so the left hand side of the equation is zero. Hence,
0=(m1v1′−m1v1)+(m2v2′−m2v2)
swipe0 = (m₁v₁′ - m₁v₁) + (m₂v₂′ - m₂v₂)
In other words, change in momentum of 1st ball + change in momentum of the 2nd ball is zero.
or(m1v1+m2v2)=(m1v1′+m2v2′)(2.28)
swipeor (m₁v₁ + m₂v₂) = (m₁v₁′ + m₂v₂′) (2.28)
Which means that total initial momentum of the system before collision is equal to the total final momentum of the system after collision. Consequently, the total change in momentum of the isolated two ball system is zero.
For such a group of objects, if one object within the group experiences a force, there must exist an equal but opposite reaction force on other object in the same group. As a result, the change in momentum of the group of objects as a whole is always zero. This can be expressed in the form of law of conservation of momentum, which states that:
In applying the conservation law, we must notice that the momentum of a body is a vector quantity.
Example 2.7
Two spherical balls of 2.0 kg and 3.0 kg masses are moving towards each other with velocities of 6.0 m s⁻¹ and 4 ms⁻¹, respectively. What must be the velocity of the smaller ball after collision, if the velocity of the bigger ball is 3.0 m s⁻¹?
Solution: As both the balls are moving towards one another, so their velocities are of opposite sign. Let us suppose that the direction of motion of 2 kg ball is positive and that of the 3 kg is negative.
The momentum of the system before collision is:
m₁v₁ + m₂v₂ = 2 kg × 6 m s⁻¹ + 3 kg × (-4 m s⁻¹)
= 12 kg m s⁻¹ - 12 kg m s⁻¹ = 0
Momentum of the system after collision = m₁v₁′ + m₂v₂′
= 2 kg × v₁′ + 3 kg × (-3) m s⁻¹
From the law of conservation of momentum
[Momentum of the system before collision] = [Momentum of the system after collision]
0 = 2 kg × v₁′ - 9 kg m s⁻¹
Do You Know?: a motorcycle's safety helmet (original drawing after the picture printed in the textbook)
We note that, before collision (v₁ - v₂) is the velocity of first ball relative to the second ball. Similarly (v′₁ - v′₂) is the velocity of the first ball relative to the second ball after collision. It means that relative velocities before and after the collision has the same magnitude but are reversed after the collision. In other words, the magnitude of relative velocity of approach is equal to the magnitude of relative velocity of separation.
In equations (2.29) and (2.30) m₁, m₂, v₁ and v₂ are known quantities. We solve these equations to find the values of v₁′ and v₂′ which are unknown. The results are
There are some cases of special interest, which are discussed below:
(i) When m₁ = m₂
Figure 2.11: Case (i), m1 = m2 (original drawing after the textbook's Figure 2.11).
From Eq. (2.32) and (2.33), we find that
v1′=v2andv2′=v1(as shown in Fig. 2.11)
swipev₁′ = v₂ and v₂′ = v₁ (as shown in Fig. 2.11)
(ii) When m₁ = m₂ and v₂ = 0
Figure 2.12: Case (ii), m1 = m2 and v2 = 0 (original drawing after the textbook's Figure 2.12).
In this case, the mass m₂ be at rest, and v₂ = 0, then Eqs. (2.32) and (2.33) give
v1′=0;v2′=v1
swipev₁′ = 0 ; v₂′ = v₁
When m₁ = m₂ then ball of mass m₁ after collision will come to a stop and m₂ will take off with the velocity that m₁ originally had, as shown in Fig.(2.12). Thus when a billiard ball m₁, moving on a table collides with exactly similar ball at m₂ at rest, the ball m₁ stops while m₂ begins to move with the same velocity, with which m₁ was moving initially.
(iii) When a light body collides with a massive body at rest
Figure 2.13: Case (iii), a light body collides with a massive body at rest (original drawing after the textbook's Figure 2.13).
In this case initial velocity v₂ = 0 and m₂>>m₁. Under these conditions m₁ can be neglected as compared to m₂. From Eq. (2.33) and (2.32) we have v₁′ = -v₁ and v₂′ = 0.
The result is shown in Fig.(2.13). This means that m₁ will bounce back with the same velocity while m₂ will remain stationary. This fact is used of by the squash player.
(iv) When a massive body collides with light stationary body
Figure 2.14: Case (iv), a massive body collides with a light stationary body (original drawing after the textbook's Figure 2.14).
In this case m₁>>m₂ and v₂ = 0, so m₂ can be neglected in Eqs.(2.32) and (2.33). This gives v₁′ ≈ v₁ and v′₂ ≈ 2v₁. Thus after the collision, there is practically no change in the velocity of massive body, but the lighter one bounces off in the forward direction with approximately twice the velocity of the incident body, as shown in Fig.(2.14).
Example: 2.8
A 70 g ball collides with another ball of mass 140 g. The initial velocity of the first ball is 9 m s⁻¹ to the right while the second ball is at rest. If the collision were perfectly elastic. What would be the velocity of the two balls after the collision?
Solution:
m₁ = 70 g v₁ = 9 m s⁻¹ v₂ = 0
m₂ = 140 g v₁′ = ? v₂′ = ?
We know that;
v₁′ = ((m₁ - m₂)/(m₁ + m₂)) v₁
= ((70 g - 140 g)/(70 g + 140 g)) × 9 m s⁻¹ = -3 m s⁻¹
In this expression v is the velocity of the mass m. Linear momentum is, therefore, a vector quantity and has the direction of velocity. The SI unit of momentum is kilogram metre per second (kg m s⁻¹). It can also be expressed as newton second (N s).
As 2 sin θ cos θ = sin 2θ, thus the range of the projectile depends upon the velocity of projection and the angle of projection.
Therefore,R=gvi2sin2θ(2.24)
swipeTherefore, R = (vi²/g) sin 2θ (2.24)
For maximum range R, the factor sin 2θ = 1, so
2θ=sin−1(1)or2θ=90∘orθ=45∘
swipe2θ = sin⁻¹(1) or 2θ = 90° or θ = 45°
Air resistance will slow down projectile forward motion, reducing its velocity vi. The reduction in vi will result in a decrease in the range of projectile.
Ideal path and actual path of a high-speed projectile (For Your Information; original drawing after the textbook's graph).
Furthermore, air resistance is not constant throughout the flight of the object. As the object slows down, the air resistance experienced by it also decreases. This means that the object retards more slowly and accelerates more slowly as it falls down. This results in a trajectory that is not perfectly parabolic but is skewed, with steeper descent than ascent.
Example: 2.5
A ball is thrown with a speed of 30 m s⁻¹ in a direction 30° above the horizon. Determine the height to which it rises, the time of flight and the horizontal range.
Above equation is the first equation of motion. It correlates the final velocity attained by a body with initial velocity and the time interval t, when moving with constant acceleration a.
Figure 2.2(a): Projection of B on A, B cos θ (original drawing after the textbook's Figure 2.2(a)).
where A and B are the magnitudes of vectors A and B and θ is the angle between them.
For physical interpretation of dot product of two vectors A and B, these are first brought to a common origin (Fig.2.2 a) then,
A⋅B=A(projection of B on A)
swipeA⃗.B⃗ = A (projection of B⃗ on A⃗)
orA⋅B=A(magnitude of component of B in the direction of A),Fig. 2.2(b)
swipeor A⃗.B⃗ = A (magnitude of component of B⃗ in the direction of A⃗), Fig. 2.2(b)
Figure 2.2(b): Projection of A on B, A cos θ (original drawing after the textbook's Figure 2.2(b)).
=A(Bcosθ)=ABcosθ
swipe= A (B cos θ) = AB cos θ
Similarly,B⋅A=B(Acosθ)=BAcosθ
swipeSimilarly, B⃗.A⃗ = B (A cos θ) = BA cos θ
Figure 2.3: Work done by a force F at angle θ to the displacement d (original drawing after the textbook's Figure 2.3).
We come across this type of product when we consider the work done by a force F whose point of application moves a distance d in a direction making an angle θ with the line of action of F, as shown in Fig. 2.3.
Work done=(Effective component of force in the direction of motion)×Distance moved
swipeWork done = (Effective component of force in the direction of motion) × Distance moved
An iron ball of mass 1 kg is dropped from a tower. The ball reaches the ground in 3.34 s. Find, (a) the height of the tower, (b) the velocity of the ball on striking the ground.
Solution: Since the ball is falling under the action of gravity, we shall putt a = g in equations of motion.
Mass of the ball m = 1 kg
Time taken to reach ground t = 3.34 s
Initial velocity vi = 0
Final velocity vf = ?
Acceleration a = g = 9.8 m s⁻²
(a)Using first equation of motion:
vf = vi + gt
vf = 0 + (9.8 m s⁻²)(3.34 s)
vf = 32.7 m s⁻¹
(b)The velocity of the ball on striking the ground, can be determined by using third equation of motion.
Figure 2.4(a): The vector product A × B, along n̂ perpendicular to the plane of A and B (original drawing after the textbook's Figure 2.4(a)).
where n̂ is a unit vector perpendicular to the plane containing A and B as shown in Fig. 2.4 (a). Its direction can be determined by right hand rule. For that purpose, place together the tail of vectors A and B to define the plane of vectors A and B. The direction of the product vector is perpendicular to this plane. Rotate the First vector A into B through the smaller of the two possible angles and curl the fingers of the right hand in the direction of rotation, keeping the thumb erect. The direction of the product vector will be along the erect thumb, as shown in the Fig 2.4 (b). Because of this direction rule, B x A is a vector opposite in sign to A x B (Fig. 2.4-c). Hence,
A×B=−B×A(2.10)
swipeA⃗ × B⃗ = -B⃗ × A⃗ (2.10)
Figure 2.4(b), (c) and (d): the right-hand rule for A × B; B × A opposite to A × B; the parallelogram with A and B as adjacent sides (original drawing after the textbook's Figure 2.4(b) to (d)).
This lost kinetic energy is transformed into other forms of energy, such as heat, sound, or deformation.
Using the parameters m₁, m₂, M, and v₁i², v₂i², vf² in equations (2.43) and (2.44), we can calculate the kinetic energy before and after an inelastic collision and determine the amount of energy lost.
Some examples of an inelastic collision:
(i)When a karate chop breaks a pile of bricks, it's an example of an inelastic collision. In this type of collision, the objects involved don't bounce back after impact. Instead, some of the energy from the strike is absorbed by the bricks, turning into heat, sound, and the force needed to break them. This means the energy goes into breaking the bricks rather than causing the hand to rebound. If the Karate chop is not perfectly vertical and involves some horizontal motion, the momentum transfer and the resulting forces will have both horizontal and vertical components.
(ii)In a car crash, the collision is an inelastic in both the horizontal and vertical directions. When the vehicles collide and absorb the impact energy, causing them to crumple and deform. This energy absorption slows down the cars, stopping them from bouncing back. Most of the kinetic energy is lost, turning into heat, sound, and damage to the vehicles.
(iii)In real-world collisions, a ball and bat show an inelastic behavior. When the bat hits the ball, some of the kinetic energy is lost because the ball deforms, and energy is also converted into heat and sound. Even though the bat is rigid, it doesn't transfer energy perfectly and absorbs some energy itself. The ball compresses upon impact, which leads to further energy loss. Consequently, not all of the initial kinetic energy is conserved, making the collision overall an inelastic.
Figure 2.8(b): Projectile fired at angle θ with the horizontal (original drawing after the textbook's Figure 2.8(b)).
The vertical motion of the ball is also not complicated. It will accelerate downward under the force of gravity and hence a = g. This vertical motion is the same as for a freely falling body. Since initial vertical velocity is zero, hence, vertical distance y, using Eq. 2.14 is given by
y=21gt2
swipey = ½gt²
It is not necessary that an object should be thrown with some initial velocity in the horizontal direction. A football kicked off by a player; a ball thrown by a cricketer and a missile fired from a launching pad, all projected at some angles with the horizontal, are called projectiles.
In such cases, the motion of a projectile can be studied easily by resolving it into horizontal and vertical components which are independent of each other. Suppose that a projectile is fired in a direction angle θ with the horizontal by velocity vi as shown in Fig.2.8(b). Let components of velocity vi along the horizontal and vertical directions be vi cosθ and vi sinθ, respectively. The horizontal acceleration is ax = 0 because we have neglected air resistance and no other force is acting along this direction, whereas the vertical acceleration is ay = g. Hence, the horizontal component vix remains constant and at any time t, we have
vfx=vix=vicosθ(2.18)
swipevfx = vix = vi cos θ (2.18)
Interesting Information: two balls released at the same time, one dropped and one projected horizontally (original drawing after the photograph printed in the textbook)
Now we consider the vertical motion. The initial vertical component of the velocity is vi sinθ in the upward direction.
The vertical component vfy at any instant t can be determined by considering the upward motion of projectile as free fall motion (ay = -g). Using 1st equation of motion:
vfy=visinθ−gt(2.19)
swipevfy = vi sin θ - gt (2.19)
The magnitude of velocity at any instant is:
v=vfx2+vfy2(2.20)
swipev = √(vfx² + vfy²) (2.20)
The angle φ which this resultant velocity makes with the horizontal can be found from
tanϕ=vfxvfy(2.21)
swipetan φ = vfy/vfx (2.21)
In projectile motion one may wish to determine the height to which the projectile rises, the time of flight and horizontal range. These are described below.
As body moves upward, a = - g, the initial vertical velocity viy = vi sin θ = vi as vfy = 0 = vf, because the body comes to rest after reaching the highest point. Since
S=height=h
swipeS = height = h
−2gh=0−vi2sin2θ
swipe-2gh = 0 - vi² sin²θ
orh=2gvi2sin2θ(2.22)
swipeor h = vi² sin²θ / 2g (2.22)
The height of projectile will be reduced in presence of air resistance. In the presence of air resistance, the upward velocity of the projectile will decrease and hence its height will also decrease during time t.
By Newton's second law, the acceleration is given as:
a=mF
swipea = F/m
Equating the two expressions of acceleration, we have
mF=tvf−vi
swipeF/m = (vf - vi)/t
F×t=mvf−mvi(2.26)
swipeF⃗ × t = mv⃗f - mv⃗i (2.26)
where mvi is the initial momentum and mvf is the final momentum of the body.
The equation (2.26) shows that change in momentum is equal to the product of force and the time for which force is applied. This form of the second law is more general than the form F = ma, because it can easily be extended to account for changes as the body accelerates when its mass also changes. For example, as a rocket accelerates, it loses mass because its fuel is burnt and ejected to provide greater thrust.
From Eq. (2.26)
F=tmvf−mvi
swipeF⃗ = (mv⃗f - mv⃗i)/t
Thus, second law of motion can also be stated in terms of momentum as:
Figure 2.7: Velocity-time graph (original drawing after the textbook's Figure 2.7).
The above equation becomes
S=21(vi+vf)×t
swipeS = ½(vi + vf) × t
From first equation of motion,
t=avf−vi
swipet = (vf - vi)/a
Putting t in above equation
S=21(vi+vf)a(vf−vi)
swipeS = ½(vi + vf)(vf - vi)/a
orS=21(vf+vi)a(vf−vi)
swipeor S = ½(vf + vi)(vf - vi)/a
2aS=vf2−vi2(2.16)
swipe2aS = vf² - vi² (2.16)
This is the third equation of motion.
The equations of motion are useful in solving the problems relating to linear motion with uniform acceleration, when an object moves along a straight line. If its direction of motion does not change, then all the vector quantities can be manipulated like scalars. In such cases initial velocity is taken as positive. A negative sign is assigned to quantities where direction is opposite to that of initial velocity. In the absence of air resistance, all objects in free fall at the surface of the Earth, move toward the Earth with a uniform acceleration. This acceleration is known as acceleration due to gravity, denoted by g and its average value at the Earth surface is taken as 9.8 ms⁻² in the downward direction. The equation for uniformally accelerated motion can also be applied to free fall motion of the object by replacing a by g.
Example 2.2
A car travelling at 10 m s⁻¹ accelerates uniformally at 2 m s⁻². Calculate its velocity after 5 s.
Solution: vi = 10 m s⁻¹
a = 2 m s⁻²
t = 5 s
vf = ?
using first equation of motion, we can write
vf = vi + at
vf = 10 m s⁻¹ + 2 m s⁻² × 5 s
vf = 10 m s⁻¹ + 10 m s⁻¹
vf = 20 m s⁻¹
Example 2.3
A car travels with initial velocity of 15 m s⁻¹. It accelerates at a rate of 2 m s⁻² for 4 seconds. Find the displacement of the car.
Solution: Given that
vi = 15 m s⁻¹
a = 2 m s⁻²
t = 4 s
Displacement S = ?
By using 2nd equation of motion
S = vit + ½at²
Putting the values
S = (15 m s⁻¹ × 4 s) + ½(2 m s⁻²)(16 s)²
S = 76 m
Example 2.4
In a short distance race, a contestant in a car starts from rest and reaches velocity of 300 km h⁻¹, after covering a distance of 0.45 km at a constant acceleration. Find this constant acceleration.
Solution: Initial velocity = vi = 0
Final velocity = vf = 300 km h⁻¹
vf = (300×1000)/(60×60) m s⁻¹
= 250/3 m s⁻¹
Distance covered = S = 0.45 km = 0.45 × 1000 m = 450 m
swipeφ = tan⁻¹[(m₁v₁i sin θ₁ + m₂v₂i sin θ₂)/(m₁v₁i cos θ₁ + m₂v₂i cos θ₂)] (2.42)
Here φ is the direction of common velocity of two bodies with x-axis which stick together after inelastic collision. Substituting the value of m₁, m₂, M, θ₁, θ₂, φ and v₁i, v₂i, vf in equations (2.39) and (2.40), the law of conservation of momentum in above case can be proved.
Analysis of the above equation reveals that there are four unknown quantities, v₁f, v₂f, θ₁, θ₂. If these quantities can be measured, conservation of momentum and energy can be proved using equation (2.34), (2.35) and (2.36).
Example 2.9
A particle 'A' of mass 1 kg is moving with initial velocity 5 m s⁻¹ towards right collides with stationary target 'B' of same mass at rest. After collision the particle 'A' moves at an angle of 30° above horizontal with a speed of 3 m s⁻¹ and particle 'B' moves with the horizontal at an angle of 53° with a speed of 4 m s⁻¹. Prove that collision is elastic in nature.
Solution:
Initial momentum = m₁v₁i + m₂v₂i
= (1 kg × 5 m s⁻¹) + (1 kg × 0 m s⁻¹) = 5 kg m s⁻¹
Final momentum in x-direction = m₁v₁f + m₂v₂f
= (1 kg × 3 m s⁻¹ × cos30°) + (1 kg × 4 m s⁻¹ × cos53°)
= 2.60 kg m s⁻¹ + 2.40 kg m s⁻¹
= 5 kg m s⁻¹
As momentum is conserved in x-direction, therefore,