Polymers form by addition (C=C monomers, nothing lost) or condensation (bifunctional monomers, small molecule lost). The unit treats poly(ethene), PVC, polyesters (PET), polyamides (nylon-6,6, nylon-6, Kevlar), how to deduce repeat units/monomers, environmental problems of non-degradable plastics, bio/photodegradable alternatives, and biomedical polymers.
10 MCQs · 3 long questions · 10 short questions · 2 constructed-response
The chapter's topics and page numbers follow the official textbook. Lessons, lectures and practice are added after academic review.
Lessons
26.5.1 Biodegradable Polymers
26.5.1 Biodegradable Polymers · Reviewed lesson · version 1 · published 16 Nov 2026
The plastic that is naturally decomposed by microorganism into simpler non-toxic compounds when buried for a certain period is called biodegradable plastic. Plastics that contain natural polymers, such as starch, are degraded faster, as bacteria in the soil can attack natural polymers easily. Polyesters and polyamides are more biodegradable than poly(alkene)s because the soil organism can attack them better through hydrolysis into simpler components. Polyamides produce carboxylic acids and amines, whereas polyesters can be decomposed into carboxylic acids and alcohols. For, example, poly(lactic acid) (PLA) can enhance the biodegradability of plastic. Figure 26.6 shows the degradation of a plastic material containing PLA after a certain period
26.6 Polymers in Artificial Organs · Reviewed lesson · version 1 · published 16 Nov 2026
In biomedical science, polymers are very important for creating artificial organs. These are man-made devices designed to replace or support the function of damaged or diseased body parts. Polymers used in the body need to be biocompatible, mechanically suitable, sterilizable, durable and tunable.
They must not harm the body, cause allergies, or be rejected by the immune system.
Their strength, flexibility, or elasticity can be adjusted to match the body part they replace (e.g., flexible for blood vessels, strong for bones). The uses of various polymers in medical science are summarised in Table 26.2.
Table 26.2 Polymers in artificial organs
Application
Polymers Used
Key Properties & Functions
Artificial Blood Vessels (Grafts)
Poly(tetrafluoroethylene)(PTFE) and Poly(ethylene terephthalate) (PET)
Smooth surfaces to prevent blood clots; used to replace or bypass blocked vessels.
Artificial Heart Valves
Specialized Polyurethanes and Silicone
Highly flexible and durable; must be resistant to clotting.
26.4.2 Condensation Polymers · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 41 KB
When there are two functional groups available for the formation of a bond or bridging linkage to create the polymeric chains, the condensation polymerisation takes place. Mostly, a small molecule is removed from the two monomers during the formation of the polymer. The two functional group may exist in a single molecule (e.g. lactic acid) or two different molecules, as in the case of nylon 6,6.
The common functional groups that can undergo condensation polymerisation are:
amino group (NH₂) and carboxylic (COOH) group (polyamide and H₂O)
amine group (NH₂) and acyl chlorides (COCl) (polyamide and HCl)
carboxylic group (COOH) and alcohols (OH) (polyester and H₂O)
acyl chlorides (COCl) and alcohols (OH) (polyester and HCl).
Quick Check 26.2
Give the structures of the polymers formed from the monomers. For each polymer identify the following:
i.the repeat unit
ii.the type of linkage present
iii.the attractive force between the polymer chains.
26.1 Polymerisation
26.1 Polymerisation · Reviewed lesson · version 1 · published 16 Nov 2026
Polymerisation is the process of joining monomers to form a polymer. There are two main types of polymerisation:
26.3 Identification of the Type of a Polymer, Repeat Unit and Monomers from a Polymer Section
26.3 Identification of the Type of a Polymer, Repeat Unit and Monomers from a Polymer Section · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
To identify a polymer from a skeletal or structural formula, you must look for the repeating linkage and the monomer units. At this level, only two classes of polymers are under discussion
i.Addition
ii.Condensation.
Follow the given steps to identify the type of the polymer by considering the example of poly(ethene)
1. Identifying the Type of Polymer:
a.The first thing to check is what atoms make up the main horizontal chain of the polymer, i.e to identify the backbone.
b.If the main chain consists only of carbon atoms (-C-C-C-C-), it is an addition polymer. These are formed from alkenes.
c.If the main chain contains oxygen (O) or nitrogen (N) atoms with carbon, it is a condensation polymer (like polyesters or polyamides).
Now, identify the functional linkage. There are again two possibilities:
26.2.1 Properties of Nylon
26.2.1 Properties of Nylon · Reviewed lesson · version 1 · published 16 Nov 2026
Strong and resistant to breaking and can withstand rubbing and wear and tear.
Stretchable due to elasticity.
Slippery surface, reduces friction.
Generally resistant to oils, many solvents, and alkalis.
26.2.2 Industrial Applications of Nylon · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 86 KB
It is used for clothing (stockings, activewear, and swimwear), carpets, and ropes due to its strength and elasticity. Its fabric is used for raincoats, sportswear, and lingerie.
Nylon is used for the manufacturing of mechanical parts of automotive industry like gears, bearings, bushings, engine covers, and fuel lines due to its strength, low friction, and heat resistance.
Nylon is also used in making of machine parts such as screws, nuts, bolts, and various industrial components where strength and wear resistance are needed.
It is also commonly used to make ropes, fishing nets, and lines due to its high tensile strength and resistance to water wear.
Consumer goods like zippers, toothbrushes, hairbrushes, and various molded plastic parts are made of nylon.
Figure 26.4: General uses of different types of nylon (original drawing after the textbook's Figure 26.4).
Introduction · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 51 KB
Polymers are very large molecules made by joining many small molecules called monomers through polymerisation. Organic polymers are modern materials of great significance. They have made our lives easier, more efficient, and highly economical due to their superior properties and affordable costs. Polymers can be observed in our daily lives from shopping bags (poly(ethene)) and clothesline (poly(propene)) to plastic used in bulletproof vests (Kevlar®) and aerospace applications as in
26.4.1 Addition Polymers
26.4.1 Addition Polymers · Reviewed lesson · version 1 · published 16 Nov 2026
When the given monomer(s) contains C=C bonds, addition polymerisation will take place. The examples include ethene, propene, phenyl ethene (styrene) Mostly homopolymers are formed through the addition polymerization, however, sometimes copolymerisation of two different monomers having double bond can also be achieved. Such an example is a copolymer of ethene and propenoic acid (H₂C=CH-COOH).
26.5.2 Photodegradable Plastics · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 72 KB
Some functional groups can absorb more energy from the sunlight in the form of UV light. Polymers with such functionalities can be degraded by light and are termed as photodegradable. Some polymers with carbonyl groups in their chains (C=O) have been developed due to their enhanced photoabsorption. The absorption of the UV light weakens the bonds within the chain and forces between different chains of the polymers. This makes a polymer more biodegradable, thus accelerating its decomposition into less toxic compounds in the natural environment. However, photodegradable plastics cannot be used for longer time and recycling of such polymers is not efficient. Also, the plastic is buried in landfills where no light is available for photodegradability.
Because polyesters and polyamides can biodegrade under these conditions, it means they don't stay in the environment forever like some other plastics. This helps reduce the adverse effects of the plastic pollution. Scientists and engineers can use this knowledge to design materials that break down when they are no longer needed. For example, some medical implants or dissolvable stitches are made from polyesters that slowly break down in the body through hydrolysis.
Figure 26.6: Chemists are devising plastics that can be broken down by microorganism in soil or by light (original drawing after the textbook's Figure 26.6).
26.5 Challenge of Non-degradable Polymers · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 65 KB
Plastic, such as poly(ethene), is the most widely used polymeric material on the globe. Conventional polymers are non-degradable, which means they can be broken down into simpler, non-toxic compounds. Due to this reason, they become an environmental nuisance after their disposal. These polymers become part of water bodies, soil, and natural habitats of living organisms. Therefore, scientists are now developing degradable polymers to cope with this issue. The plastic material is either buried underground or even disposed of in open air in the regions where the municipality system is not good.
They stay in the environment for a very long time. This means they accumulate in landfills, oceans, and natural landscapes, leading to persistent pollution.
They take up huge amounts of space in landfills because they do not decompose. As population grows, finding space for more landfills becomes difficult.
Animals (especially marine life) can mistake plastic waste for food, leading to choking, internal injuries, or starvation. They can also get tangled in plastic debris.
Over time, large pieces of non-degradable plastics break down into tiny pieces called
26.1.1 Addition Polymerization
26.1.1 Addition Polymerization · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
In addition polymerization, monomers add to each other one by one, forming long chains. All the atoms from the original monomers become part of the polymer. Nothing is lost. Monomers must have a carbon-carbon double (C=C) or triple bond (C≡C). This bond "opens up" to allow monomers to link together. No small molecules (like water) are produced as side products. This often happens through a "chain reaction" started by a very reactive molecule (an initiator, which forms free radicals).
Polyethene, a large number of ethene (CH₂=CH₂) molecules add together by breaking double bonds and linking end-to-end.
Formation of poly(ethene) from ethene (original drawing after the textbook's unnumbered figure on PDF page 146).
Poly(ethene) is primarily of two types:
low density poly(ethene) (LDPE)
high density poly(ethene) (HDPE)
Low density poly(ethene) is used where a very light and soft material is needed, such as shopping bags, light plastic bottles, etc. HDPE is produced from ethene using a catalyst called
26.2 Nylon
26.2 Nylon · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Nylon is a type of synthetic polyamide. It is formed by condensation polymerisation, usually from two different monomers (a diamine and a dicarboxylic acid). During the reaction, a small molecule, typically water, is removed. Generally, a diamine (H₂N-R-NH₂) and a dicarboxylic acid (HOOC-R-COOH) act as monomers.
Nylon 6,6 is the most common example of synthetic amides. The formation of Nylon 6,6 involves a polymerisation reaction between 1,6-diaminohexane and 1,4-hexanedioic acid as shown below.
Preparation of nylon-6,6 (original drawing after the textbook's unnumbered figure on PDF page 150).
26.1.2 Condensation Polymerisation
26.1.2 Condensation Polymerisation · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.4 MB
In condensation polymerisation, monomers join together, but each time a new bond forms, a small molecule is eliminated from the monomers. This small molecule is usually water can also be H₂O, HCl or CH₃OH, or NH₃. Monomers must have at least two reactive functional groups (like -OH, -COOH, -NH₂) that can react with each other. These groups are on different ends of the monomer(s). Small molecules are always produced as a side product. This typically happens in a "step-by-step" manner as depicted in Figure 26.3.
Figure 26.3: Illustration of condensation polymerisation (original drawing after the textbook's Figure 26.3).
a) Polyesters
Polyesters have ester links [—C(=O)—O—] in their backbone. A diol (molecule with two -OH groups) and a dicarboxylic acid (molecule with two -COOH groups) as monomers are combined to give polyester. The -OH from the diol reacts with the -COOH from the acid. A molecule of water is removed as shown below.
Artificial Skin
Collagen (natural) and Polylactic acid (PLA) (synthetic)
Acts as a scaffold for new skin growth; some are designed to dissolve as the wound heals.
Artificial Joints (Hip/Knee)
Ultra-high molecular weight polyethylene (UHMWPE)
Provides a smooth, low-friction surface to allow movement and resist wear.
Artificial Cornea
Poly(methyl methacrylate) (PMMA) and Hydrogels
Must be perfectly clear (transparent) and biocompatible to restore vision.
swipe
Quick Check 26.2 a) the monomer (original drawing after the structure printed in the textbook on PDF page 154).
Quick Check 26.2 b) the monomers (original drawing after the structure printed in the textbook on PDF page 154).
PET section showing its ester linkage (original drawing after the textbook's unnumbered figure on PDF page 152).
i.If a carbonyl group (C=O) is directly attached next to an oxygen (O). Such polymers are classified as polyesters. For example, PET has an ester linkage in the given section of its structure.
If there is a carbonyl group (C=O) directly next to a nitrogen (N) with a hydrogen (H) attached, it presents an amide or peptide linkage. The polymer is, therefore, classified as a polyamide (e.g., Nylon 6,6 or Kevlar).
Kevlar section showing its amide linkages (original drawing after the textbook's unnumbered figure on PDF page 152).
Table 26.1 Identification of the type of a polymer from its section
2.Determining the Repeat Unit: To find the original monomers, one must first identify the smallest section that repeats itself in the section of the polymer.
i.To find the repeating pattern, look for where the sequence starts to duplicate itself. Locate such duplicating sections in the backbone.
ii.Place brackets around one of these recurring sections and add the subscript n. This section within the brackets is the repeat unit of the polymer.
3. Identifying the Monomer(s):
a)For addition polymers, change the C-C single bond in the repeat unit back into a C=C double bond to find the monomer.
Identification of repeat unit and monomers (addition) (original drawing after the textbook's unnumbered figure on PDF page 153).
b)For Condensation polymers: Add water back in. Break the ester or amide bond. Add -OH to the C=O side and -H to the O or N side as given below.
Identification of repeat unit and monomers (addition) (original drawing after the textbook's unnumbered figure on PDF page 153).
Quick Check 26.2
a)Identify the type of polymerisation and monomers forming the following polymer sections.
Quick Check 26.2 a i) polymer section (original drawing after the structure printed in the textbook on PDF page 154).
Quick Check 26.2 a ii) polymer section (original drawing after the structure printed in the textbook on PDF page 154).
Quick Check 26.2 a iii) polymer section (original drawing after the structure printed in the textbook on PDF page 154).
. The properties of polymers broadly vary depending on the type and number of
monomers
in the polymer, and the method through which they are manufactured. Some polymers are very light and soft, which are suitable for applications where soft materials are needed. Others are hard and thermally very stable allowing their utilization as hard and durable materials. In the above two examples, poly(ethene) and poly(propene) represent very light and soft kind, whereas Kevlar® is a hard material suitable for bulletproof vests.
Figure 26.1: a) A bulletproof vest made from Kevlar b) poly(propene) rope (original drawing after the textbook's Figure 26.1).
catalyst at low pressure and temperature. It finds its uses in plastic containers, thick shopping bags, toys, etc. LDPE and HDPE differ in the nature of their chains with LDPE being more branched. This makes it unable to pack tightly giving a less solid and more elastic material. While HDPE has linear chains allowing them to pack closely to give a compact structure with tough and dense material.
Polyvinyl Chloride (PVC)
Poly(chloroethene) or PVC is made from a monomer called chloroethene (CH₂=CHCl) through an addition polymerisation reaction.
A more detailed depiction of the formation of PVC from its monomers is provided in the following scheme.
Formation of PVC from chloroethene, condensed and detailed (original drawing after the textbook's unnumbered figure on PDF page 147).
PVC is a versatile type of plastic. Its properties can be changed a lot by adding different chemicals (plasticizers). Plasticizers are chemicals added to materials to make them softer, more flexible, and easier to work with. They cause this by reducing the strong forces between polymer chains, allowing them to move more freely.
Rigid PVC (without plasticizers) is hard and stiff and doesn't bend easily. It is chemically inert because it does not react with most acids, bases, or oils. It is a good electrical insulator. Due to the chlorine atoms, it is naturally resistant to burning and self-extinguishing. It lasts a long time and resists weathering. Plasticised PVC (with plasticisers) is flexible and soft, so it can be bent and shaped easily. It maintains good chemical and electrical properties, but is less rigid.
Industrial Applications of PVC (Figure 26.2)
Various uses of PVC include:
i.Pipes and fittings for water supply, drainage, and sewage systems due to its corrosion resistance and durability.
ii.Window frames and door profiles, floor vinyl tiles and sheets
iii.Electrical insulation for wires and cables.
iv.Tubing, blood bags, and catheters.
v.Cling films, bottles (e.g., for cooking oil), blister packs.
The wheels of this skateboard are made from nylon (original drawing after the photograph printed in the textbook).
Another type of nylon is nylon-6, which is formed from a single monomer called caprolactam as in the following scheme. It is named nylon-6 because it involves a monomer with six carbon atoms. Caprolactam has a cyclic structure as shown in the following figure. The reaction is not a typical condensation reaction because no small molecule is removed during the reaction. Nevertheless, nylon 6 is classified as a condensation polymer due to the mode of formation of the amide linkage.
Formation of nylon-6 from caprolactam (original drawing after the textbook's unnumbered figure on PDF page 150).
Nylon 6 is a harder material than nylon-6,6 and provides a smoother surface and higher impact resistance (harder to break by hitting). It is easier to mold as its melting point is lower than nylon-6,6. It is mostly used in rollers, skate board wheels, and power tool handles to avoid shocks.
Quick Check 26.1
Quick Check 26.1 a: the repeating unit of nylon-6,10 (original drawing after the structure printed in the textbook on PDF page 151).
Preparation of Terylene/PET, a polyester from ethane-1,2-diol and benzene-1,4-dicarboxylic acid (original drawing after the textbook's unnumbered figure on PDF page 148).
Polyesters have special features, such as high tensile strength, which make them suitable to manufacture fibres. Polyester is used as an alternative to cotton due to its low cost and ability to resist creases. It is also used as a plastic; for example, PETE is used in making plastic bottles for beverages and other food packaging. Polyester is also used as cross links to obtain hard plastics. An example is the glass fibre reinforced cross-linked polyester.
b) Polyamides
Polyamides have amide links [—C(=O)—NH—] in their backbone. They can be prepared from many starting materials.
i) From a Diamine and a Dicarboxylic Acid
A diamine (molecule with two -NH₂ groups) and a dicarboxylic acid (molecule with two -COOH groups) are joined together to give polyamide. The -NH₂ from the diamine reacts with the -COOH from the acid. A molecule of water is removed.
Polyamide from a diamine and a dicarboxylic acid (original drawing after the textbook's unnumbered figure on PDF page 149).
Example: Nylon 6,6 uses hexamethylenediamine and Adipic acid.
ii) From a Diamine and a Dioyl Chloride
A diamine and a dioyl chloride (molecule with two -COCl groups) as monomers are joined to give polyamide. Dioyl chlorides are more reactive than dicarboxylic acids. The -NH₂ from the diamine reacts with the -COCl from the dioyl chloride. A molecule of hydrogen chloride (HCl) is removed. General equation is given below:
Polyamide from a diamine and a dioyl chloride (original drawing after the textbook's unnumbered figure on PDF page 149).
An amino acid is a single monomer that has both an -NH₂ (amino) group and a -COOH (carboxylic acid) group in one molecule. The -NH₂ group of one amino acid reacts with the -COOH group of another amino acid removing a water to form a peptide bond. Peptide bond is also a type of amide linkage. General equation is given below:
Polyamide (polypeptide) from an amino acid (original drawing after the textbook's unnumbered figure on PDF page 149).
Proteins are natural polyamides made from amino acids, which will be discussed in Biochemistry (Chapter 27).
Amide linkage is also formed between acyl chlorides, a very reactive organic compound and an amine, e.g. ammonia. methanamine (CH₃-NH₂), N, N-dimethylamine, (CH₃)₂NH. When an acyl chloride reacts with ammonia or an amine, a molecule of hydrogen chloride (HCl) gas is removed. This reaction happens easily at room temperature because acyl chlorides are fairly reactive.
Amide from an acyl chloride and an amine (original drawing after the textbook's unnumbered figure on PDF page 149).