First-row transition metals have partially filled d-orbitals giving variable oxidation states, catalytic activity, coloured complexes and paramagnetism. The unit develops coordination chemistry: ligands, geometry, crystal-field splitting and colour, ligand exchange, stability constants, stereoisomerism and redox reactions with standard electrode potentials.
18.3 Transition Metal Complexes · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Formation of the [Cu(NH₃)₄]²⁺ complex ion (original drawing after the textbook's unnumbered scheme).
Transition elements form complex ions because they have vacant (empty) d orbitals that are energetically accessible to accept electron pairs. The central transition metal ion (e.g., Fe³⁺ or Cu²⁺ has partially filled or empty (n-1)d orbitals.
The energy of these empty d-orbitals is low enough (accessible) to participate in bond formation. The vacant d-orbitals on the metal ion accept the lone pairs of electrons donated by the ligands, forming coordinate covalent bonds (or dative bonds). The electron pair donor species (molecules or ions, like H₂O, NH₃ or Cl⁻) are called ligands. This donation and acceptance of electron pairs create a stable complex ion (or coordination compound).
A metal complex (or coordination compound) is a molecule or ion that forms when a central metal atom or ion is surrounded by a number of electron donor species (molecules or ions). A transition element acts as a Lewis acid (electron pair acceptor) in complex formation.
A ligand is a molecule or ion (for example, H₂O, NH₃ or Cl⁻) that possesses at least one lone pair of electrons and forms a coordinate covalent bond (dative bond) to the central metal atom or ion in a complex. The word "ligand" originates from the Latin “ligare”, meaning "to bind". It acts as a Lewis base because it donates an electron pair.
Ligands can be classified into different categories. The negatively charged electron pair donor species are called anionic ligands. These are the most abundant type of ligands. The most common examples are Cl⁻, CN⁻, OH⁻, C₂O₄²⁻ etc. Their names usually end at “-o”, e.g., chloride becomes “chloro” and cyanide becomes “cyano” etc.
The neutral molecular species which are able to donate pair of electrons to form the transition metal complexes are called neutral ligands. For example, H₂O, NH₃, CO, etc. Their names usually remain the same, though some have special names like H₂O (aqua), NH₃ (ammine) and CO (carbonyl). The positively charged electron pair donating species are called cationic ligands. They are rare and their names often ends at “-ium”. For example, NO⁺ (nitrosonium), NH₂-NH₃⁺ (hydrazinium) etc.
A monodentate ligand is a species that can donate only one pair of electrons to the central metal atom or ion. Some examples are H₂O, NH₃, CO, Cl⁻, OH⁻ and CN⁻ etc. In each case, only a single atom on the ligand forms the dative covalent bond to the metal. Bidentate ligands can donate two electron pairs to the central metal atom/ion. Typical examples are 1,2-diaminoethane (also known as ethylenediamine) and ethanedioate (or oxalate) ion. In 1,2-diaminoethane (H₂NCH₂CH₂NH₂, abbreviated as en), each of the two nitrogen (N) atoms donate a lone pair to the metal. In the ethanedioate ion (C₂O₄²⁻), two oxygen (O) atoms, one from each carboxyl group, donate electron pairs.
A polydentate ligand is a general term used for any ligand that forms more than two dative bonds to a single central metal atom/ion. Ethylenediaminetetraacetate ion (EDTA) is a common example. It is a hexadentate ligand because it can attach to a metal ion using six donor atoms (four oxygen and two nitrogen atoms).
Structures of 1,2-diaminoethane, ethanedioate and ethylenediaminetetraacetate (EDTA) (original drawing after the textbook's unnumbered structures).
The coordination number is the total number of dative bonds formed between ligands and the central metal atom or ion in a complex. For example, in the complex ion [Fe(CN)₆]⁴⁻, the central metal ion Fe²⁺ is bonded to six CN⁻ ligands, so the coordination number of the metal ion is 6 as shown in Figure 18.2. The coordination number determines the overall structure of the complexes.
A coordination sphere is the central metal atom or ion and the directly bonded ligands (molecules or ions) surrounding it within a coordination compound. It defines the immediate chemical environment, is usually written inside square brackets [Complex].
Figure 18.2: Hexacyanoferrate (II) complex and its components (original drawing after the textbook's Figure 18.2).
The charge on coordination sphere is the arithmetic sum of the charges of central metal atom or ion and ligands. Whereas, the charge on the metal atom or ion will be the difference of the charge on sphere and total charge of ligands.
18.6 Colour of Complexes · Reviewed lesson · version 1 · published 16 Nov 2026
The d-orbitals have a characteristic cloverleaf shape, generally resembling four lobes or two dumbbells in a plane, with five distinct orbitals dxy, dxz, dyz, dx²−y², and dz². In an isolated atom, all five d orbitals have the same energy (degenerate), but their different shapes lead to different energies in complex ions (non-degenerate). Their spatial (in space) arrangements and energy levels decide the bonding, colour, and magnetic properties of transition metals. When ligands approach the metal ion to form an octahedral or a tetrahedral complex, they create an electric field that causes the five d orbitals to split into two groups with different energies, making them non-degenerate. The energy difference is related to the extent of splitting between the two sets of orbitals and is represented by Δ.
18.9.2 Optical Isomerism · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 66 KB
Optical isomers are non-superimposable mirror images of each other. Optical isomerism is commonly shown by octahedral complexes with bidentate ligands. An example is the nickel(II) complex containing 1,2-diaminoethane (NH₂CH₂CH₂NH₂) as the bidentate ligand (Figure 18.13). The two isomers are optical isomers because the two different molecules are mirror images of each other and cannot be superimposed. Such pairs of molecules are called enantiomers. The optical isomers rotate the plane of polarized light in opposite directions. The isomer that rotates the plane in right hand direction is called dextrorotatory "+", while the one that rotates in left hand direction is called laevorotatory "–".
Figure 18.13: The two non-superimposable optical isomers of [Ni(en)₃]²⁺ (original drawing after the textbook's Figure 18.13).
Quick Check 18.7
18.2 Properties of Transition Elements
18.2 Properties of Transition Elements · Reviewed lesson · version 1 · published 16 Nov 2026
The first row of transition elements includes the metals from titanium to copper. The common physical and chemical properties arising due to their partially filled 3d orbitals are given as under.
18.1 First Row Transition Elements (3d) · Reviewed lesson · version 1 · published 16 Nov 2026
18.9 Stereoisomerism in Transition Metal Complexes
18.9 Stereoisomerism in Transition Metal Complexes · Reviewed lesson · version 1 · published 16 Nov 2026
The compounds that have the same chemical formula and bonds but differ with respect to the arrangement of ligands in space are called stereoisomers. There are two types of stereoisomerism: geometrical isomerism and optical isomerism.
Tetrahedral Complexes · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 97 KB
In tetrahedral complexes (with four ligands), like [CuCl₄]²⁻, the splitting is inverted with three higher-energy orbitals dxy, dxz, dyz and two lower-energy orbitals dx²−y², dz². The magnitude of splitting in tetrahedral complexes is smaller than that in octahedral complexes (Figure .18.5).
Figure 18.5: Splitting of d orbitals in tetrahedral fields (original drawing after the textbook's Figure 18.5).
18.7 Ligand Exchange Reactions of Complexes · Reviewed lesson · version 1 · published 16 Nov 2026
If new complex to be formed is more stable than substitution of ligands occurs and it will changes the properties of the new complex, like colour, structure and reactivity. The complexes of copper(II) and cobalt(II) ions can be used to show ligand substitution reactions.
18.9.1 Cis-Trans Isomerism · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
In these isomers, identical ligands are present at either adjacent (90° angle, cis) or opposite (180° angle, trans) positions. This is common in square planar (e.g., [Pt(NH₃)₂Cl₂]) and octahedral complexes (e.g., [Co(NH₃)₄Cl₂]).
Figure 18.11: The geometrical isomers, cisplatin and transplatin (original drawing after the textbook's Figure 18.11).
The cis and trans isomers of [Pt(NH₃)₂Cl₂] are shown in Figure 18.11. In cis-[Pt(NH₃)₂Cl₂] (cisplatin), the chlorine atoms are adjacent to each other at the angle of 90° in the square complex but in trans-[Pt(NH₃)₂Cl₂] (transplatin), they are opposite to each other at an angle of 180°. The properties of these geometrical isomers are different. It is interesting to know that cisplatin is used as an anti-cancer drug, while transplatin does not show such property.
In transplatin, the individual bond dipoles of the identical ligands are pointed in opposite direction and cancel each other, making the molecule nonpolar. In cisplatin, the similar individual bond moments do not cancel out, resulting in a non-zero dipole moment that makes it polar.
18.4 Predicting Formula and Charge of a Complex Ion
18.4 Predicting Formula and Charge of a Complex Ion · Reviewed lesson · version 1 · published 16 Nov 2026
The formula and charge of a complex ion are determined by combining the central metal ion, its oxidation state, and the ligands along with their charges. The general structure of a complex ion is [M(L)ₓ]±ʸ. Where, M is the central metal ion, L is the ligand, x is the number of ligand (determined by the coordination number) and ±y is the overall charge of the complex ion.
Table 18.3. Predicting formula and charge of a complex ion
Complex type
Cationic Complex
Anionic Complex
Neutral Complex
Metal Ion
Co
Fe
Ni
Oxidation state of metal
+3
+2
18.6.1 Colour Formation
18.6.1 Colour Formation · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
When white light falls on the compound, it may get absorbed completely, and the complex appears black. The compound may reflect or transmit the whole light, and appears to be white. Another option is that the compound may absorb some of the light and reflect the remaining part, then complex shows different colours depending upon colour of the light reflected. The colour is produced in the substances due to absorption and emission of light in the visible region of the spectrum according the following colour scheme (Figure 18.6).
The colour we see is the opposite (complementary colour) to the colour (frequency/wavelength) of light that is absorbed. For example, if a complex absorbs yellow light, it appears violet.
Figure 18.6: Colour wheel showing complementary colours (original drawing after the textbook's Figure 18.6).
The electrons in a lower-energy d-orbital absorb light and are promoted (excited) to a higher-energy d-orbital. The light energy involved in the transition of electron is responsible for showing definite colour of the complex. The unabsorbed light is transmitted and it decides the nature of the colour. This process is called a d-d transition. The energy required for a d-d transition, corresponds to a specific frequency (ν) and wavelength (λ) of visible light according to the Planck's equation, ΔE = hν = hc/λ (h is Planck's constant and c is speed of light).
18.2.3 Variable Oxidation States · Reviewed lesson · version 1 · published 16 Nov 2026
First row transition elements show variable oxidation states because the 3d and 4s subshells have comparable (very similar) energy. The energy difference between the inner 3d subshell and the outermost 4s subshell is very small. So, like 4s electrons, the 3d electrons can also easily be lost. This means that not only the electrons in the outermost 4s subshell but also the electrons in the partially filled 3d subshell are involved in chemical bonding.
A 3d metal atom can lose:
Only the 4s electrons, usually giving the common +2 oxidation state.
The 4s electrons plus a variable number of 3d electrons, giving the higher oxidation states.
Among these metals, Mn has the maximum oxidation state of +7. The oxidation state of transition elements varies in parabolic trend from left to right within d-block. The various oxidation states of 3d elements are provided in Table 18.2.
Table 18.2 Common oxidation states of 3d elements
Ti
V
Cr
Mn
Fe
Co
18.1.1 Electronic Configuration of Transition Metals and their Ions
18.1.1 Electronic Configuration of Transition Metals and their Ions · Reviewed lesson · version 1 · published 16 Nov 2026
Electronic configuration of the transition elements usually follows Aufbau principle, except in chromium and copper. These two elements show anomaly due to acquiring stability of half-filled (chromium; 3d⁵) and completely filled (copper; 3d¹⁰) d-subshell. This stabilizing factor makes the electron cloud of these two elements more symmetrical and provides a better shielding effect to nucleus. The electronic configuration of first row of transition elements in their neutral (M⁰), dipositive (M²⁺) and tripositive (M³⁺) oxidation states are given in the following Table 18.1.
Table 18.1 Electronic configurations of first row transition elements
Element
Symbol
Atomic Number
Electronic Configuration (M⁰)
(M²⁺)
(M³⁺)
Titanium
Ti
22
[Ar] 3d²4s²
18.2.4 Transition Metals as Catalysts
18.2.4 Transition Metals as Catalysts · Reviewed lesson · version 1 · published 16 Nov 2026
Transition elements act as effective catalysts to carry out various chemical reactions. They can easily switch between their different stable oxidation states (e.g., Fe²⁺ ⇌ Fe³⁺). This allows the metal ion to form an unstable intermediate compound with a reactant molecule. The intermediate then quickly reacts to form the final product and regenerates the catalyst back to its original oxidation state, providing a reaction pathway with lower activation energy. This process usually occurs in homogenous catalysis. For example, nickel salts are used in the preparation of acrylic acid from acetylene, involve the oxidation states of Ni(0) and Ni(II).
Another characteristic of transition metals is their vacant d-orbitals that are energetically accessible. Reactant molecules attach with the catalyst surface and form a temporary activated complex on the surface, which holds the reactants in the correct orientation, lowering the activation energy required for the reaction to occur. After the reaction, the products desorb, and the catalyst is ready for the next cycle. This process is generally observed in heterogeneous catalysis. A classic example of heterogeneous catalysis is the use of solid iron to accelerate the reaction between nitrogen and hydrogen gases to form ammonia in the Haber Process.
Quick Check 18.2
18.7.3 Effect of Ligand Exchange on the Colour of Complexes
18.7.3 Effect of Ligand Exchange on the Colour of Complexes · Reviewed lesson · version 1 · published 16 Nov 2026
The exchange of ligands in a complex changes the magnitude of splitting for the metal ion. As a result, the frequency of absorbed light also changes, leading to a change in the observed colour. In each case, the new complex has a different ΔE because the new ligands (NH₃ or Cl⁻) makes more stable complex than the original H₂O ligands, leading to a different absorbed frequency and a different observed colour.
Table 18.4 Ligand exchange and colour change
Metal ion
Initial Colour of Complex
Ligand Exchange Reaction
Final Colour of Complex
Cu²⁺
[Cu(H₂O)₆]²⁺ (Blue)
Add conc. NH₃ solution
[Cu(NH₃)₄(H₂O)₂]²⁺ (Deep Blue)
Cu²⁺
[Cu(H₂O)₆]²⁺ (Blue)
Add conc. HCl solution
18.5 Geometry of Transition Metal Complexes
18.5 Geometry of Transition Metal Complexes · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Transition metal complexes exhibit specific geometries (shapes) depending upon the electronic configuration and coordination number (number of donor atoms attached) of the metal, and the nature of the ligands. The common geometries found in transition metal complexes are explained below:
Linear: In this geometry, the two ligands are attached on opposite sides of the central metal ion at an angle of 180°. Typical examples of linear complexes are [Ag(NH₃)₂]Cl and K[Ag(CN)₂].
Square planar: In square planar shape, the central metal ion and the four ligands lie in the same plane, at the corners of a square with bond angle 90°. This geometry is characteristic of d⁸ metal ions (e.g., Ni²⁺ and Pt²⁺) with ligands like, NH₃ and CN⁻). Examples are: [Ni(CN)₄]²⁻ and [Pt(NH₃)₄]²⁺.
Tetrahedral: In tetrahedral complexes, four ligands are directed at the corners of a tetrahedron with bond angle of 109.5°. Such shapes are common when the metal ion has a d⁷, d⁸ and d¹⁰ electron configuration for example, [CoCl₄]²⁻ and [MnCl₄]²⁻.
Figure 18.3: Shapes of Transition Metal complexes (original drawing after the textbook's Figure 18.3).
Octahedral
Octahedral Complexes
Octahedral Complexes · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 94 KB
In octahedral complexes (with six ligands), like [Ti(H₂O)₆]³⁺, the five d orbitals split into two sets; three lower-energy orbitals including, dxy, dxz, dyz and two higher-energy orbitals; dx²−y², dz² (Figure 18.4).
Figure 18.4: Splitting of d orbitals in octahedral fields (original drawing after the textbook's Figure 18.4).
18.2.1 Physical Properties · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
The transition metals exist as hard and rigid solids.
Except copper, which is reddish brown, others occur as silvery or grey lustrous metals.
Their atomic radius usually decreases from left to right, however, at the end it increases a little. This increase may be associated to the stability acquired by copper due to its completely filled d-subshell.
They have high melting and boiling points. The melting and boiling points of these elements show a variable trend from left to right as shown in Figure 18.1.
They are good conductors of electricity and heat.
They have high densities that generally increase across the row from titanium to copper. This is due to a regular build-up of nuclear charge and atomic size shrinkage.
They possess a shiny surface, and are malleable (can be hammered into thin sheets), and ductile (can be drawn into wires).
Most of them and their compounds are paramagnetic due to the presence of unpaired d electrons.
Figure 18.1: Atomic radii, ionic radii, melting points and boiling points of 3d transition elements (original drawing after the textbook's Figure 18.1).Describe this diagram
The radii fall from titanium to nickel and rise slightly at copper. The melting and boiling points dip sharply at manganese.
18.2.2 Chemical Properties
18.2.2 Chemical Properties · Reviewed lesson · version 1 · published 16 Nov 2026
Transition metals have variable oxidation states as they can lose varying number of electrons to form stable ions (e.g., Fe²⁺ and Fe³⁺).
They have a high tendency to form coordination compounds (complexes) by accepting lone pairs of electrons from ligands into vacant d-orbitals.
They form coloured ions and complexes due to the transition of electrons from lower energy to higher energy level as a result of absorption of light.
These metals and their compounds behave as catalysts because they can easily change oxidation states.
18.10.1 Reaction of Acidified Manganate(VII) Ions (MnO₄⁻) with Ethanedioate Ions (C₂O₄²⁻)
18.10.1 Reaction of Acidified Manganate(VII) Ions (MnO₄⁻) with Ethanedioate Ions (C₂O₄²⁻) · Reviewed lesson · version 1 · published 16 Nov 2026
Let us take the example of the reaction between acidified MnO₄⁻ and C₂O₄²⁻, we compare the standard reduction potentials of the two half-reactions. The half-reaction with the more positive E° value is more likely to undergo reduction (to proceed to the right). Based on the E° values, the MnO₄⁻ ion is more likely to be reduced to Mn²⁺ (acting as the oxidizing agent), and the C₂O₄²⁻ ion must be oxidized to CO₂ (acting as the reducing agent).
2COX2X(g)+2eX−CX2OX4X2−X(aq)E∘=+0.49V
swipe2CO₂(g) + 2e⁻ → C₂O₄²⁻(aq) E° = +0.49 V
18.7.2 Ligand Exchange Reactions of Cobalt(II) Complexes
18.7.2 Ligand Exchange Reactions of Cobalt(II) Complexes · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Cobalt(II) salts also form complex ions in aqueous solution. As mentioned in the case of copper(II), a Co²⁺(aq) ion refers to the complex ion [Co(H₂O)₆]²⁺. This ion gives a pink colour to the aqueous solution of cobalt(II) sulphate. On adding sodium hydroxide solution, we see a blue precipitate of cobalt(II) hydroxide, which may turn pink on standing.
18.8 Stability of Complexes and Stability Constant, Kstab
18.8 Stability of Complexes and Stability Constant, Kstab · Reviewed lesson · version 1 · published 16 Nov 2026
The stability constant (Kstab) is an equilibrium constant (Kc) for the formation of a complex ion. In aqueous solutions, water is the initial ligand. When we add a new ligand, it competes with water to bind with the metal ion. Let us take the example of following equilibrium complexation reaction with its Kstab expression;
18.7.1 Ligand Exchange Reactions of Copper(II) Complexes
18.7.1 Ligand Exchange Reactions of Copper(II) Complexes · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Whenever, we write Cu²⁺(aq), we actually refer to the complex ion [Cu(H₂O)₆]²⁺. This ion gives blue colour to the solution of a copper(II) salt, for example, copper sulphate. On adding sodium hydroxide to a copper(II) solution, a light blue precipitate is formed. Two water ligands are replaced by two hydroxide ions in this reaction.
blue solution[Cu(HX2O)X6]X2+X(aq)+2OHX−X(aq)light blue precipitate[Cu(HX2O)X4(OH)X2]X(s)+2HX2OX(l)
Effect of Different Ligands on ΔE and Colour · Reviewed lesson · version 1 · published 16 Nov 2026
The nature of the ligand affects the magnitude of the splitting, ΔE. Some ligands like NH₃, CN⁻ cause larger splitting, increasing the energy gap (ΔE). Whereas, for some other ligands like Cl⁻, I⁻, ΔE is smaller. A larger ΔE means a higher frequency, (shorter wavelength) of light must be absorbed that is in the region of violet or blue colour. Corresponding to that a yellow light is reflected giving the compound a yellow colour. Some complexes absorb low-energy light (red/orange) and appear blue or green according to the complementary colour scheme. Ligands can be arranged in order of their ability to cause d-orbital splitting (from high ΔE to low ΔE):
CNX−>en>NHX3>HX2O>OHX−>ClX−>BrX−>IX−
swipeCN⁻ > en > NH₃ > H₂O > OH⁻ > Cl⁻ > Br⁻ > I⁻
18.10 Redox Reactions of Transition Metals
18.10 Redox Reactions of Transition Metals · Reviewed lesson · version 1 · published 16 Nov 2026
Transition elements are notable for their ability to exist in multiple oxidation states. The feasibility of a redox reaction is determined by comparing the standard electrode potentials (E°) of the half-reactions involved. A reaction is feasible if the overall cell potential (E°cell) is positive.
Ecell∘=Ereduction∘−Eoxidation∘
swipeE°cell = E°reduction − E°oxidation
18.10.2 Reaction of Manganate(VII) Ion (MnO₄⁻) with Iron(II) Ion (Fe²⁺)
18.10.2 Reaction of Manganate(VII) Ion (MnO₄⁻) with Iron(II) Ion (Fe²⁺) · Reviewed lesson · version 1 · published 16 Nov 2026
This redox reaction involves the reduction of MnO₄⁻ and the oxidation of Fe²⁺ as indicated by the potential values. The relevant half-reactions (in reduction form) are:
Transition metals, found in d and f blocks of the modern periodic table, are characterized by their high density, conductivity, and ability to form colourful compounds. Iron stands as the backbone of human civilization; it has played a key role in the industrial revolution for the creation of durable tools and modern steel infrastructure. Copper, silver and gold are well known since ancient ages as symbols of wealth and prestige. They have been historically used for coinage and jewellery; they remain essential today in high-end electronics and dentistry due to their exceptional corrosion resistance and conductivity. From the steel in our cars to the gold in our smartphones, transition metals are highly valuable for our modern life. The transition metals can be classified on the basis of their electronic configuration into d-block (if their outermost electrons are being filled in d-orbitals) and f-block (if their outermost electrons are being filled in f-orbitals). However, as the d-block transition elements are more common in our daily life usage, and among them first row transition elements i.e., 3d-series, have a key role in human civilization and development, therefore, we shall focus on these 3d transition elements onwards in this chapter.
First row transition elements are the elements found in the d block of the Periodic Table, having partially filled d-orbitals in any of their stable oxidation state. They are called transition elements because they show transitions between variable oxidation states. Although d-block elements are composed of groups 3 to 12, however, zinc and scandium cannot be classified as transition elements. Zn forms only one ion (Zn²⁺), which has a complete 3d subshell, the electronic configuration of Zn²⁺ is [Ar] 3d¹⁰ 4s⁰.
[Co(NH₃)₄(H₂O)₂]³⁺ is an [MA₄B₂] type octahedral complex. The cis and trans isomers of [Co(NH₃)₄(H₂O)₂]³⁺ are shown in Figure 18.12. In the cis isomer, the two H₂O ligands occupy adjacent positions at a 90° angle with respect to each other, while in the trans isomer, they occupy opposite positions at a 180° angle to each other.
Figure 18.12: The geometrical isomers, [Co(NH₃)₄(H₂O)₂]³⁺ (original drawing after the textbook's Figure 18.12).
: In this geometry, the central metal ion is surrounded by six ligands, coming along the x, y and z axes. Four ligands form a square plane with an angle of 90°, and the other two are positioned above and below this plane at an angle of 180°. This is the most common geometry for transition metal complexes. The common examples are [Cr(NH₃)₆]³⁺ and [Co(en)₃]³⁺.
The reaction with higher reduction potential is likely to occur and proceed to the right and vice versa. The given reduction potential values indicate that Mn(VII) ion should be reduced to Mn(II) acting as an oxidizing agent while oxalate must be oxidized to CO₂ and behave as reducing agent.
The number of electrons lost must be equal to number of electrons gained. It is done by multiplying the two half reactions with different coefficients. Here, oxidation half equation is multiplied by 2 and reduction half equation by 5.
When excess ammonia solution is added to the cobalt(II) hydroxide precipitate, a ligand exchange reaction takes place. The ammonia ligands replace the water and hydroxide ligands, forming a soluble ammine complex, hexaamminecobalt(II) ions. The colour of the solution turns yellow (Figure 18.9).
blue precipitate[Co(HX2O)X4(OH)X2]X(s)+6NHX3X(aq)yellow solution[Co(NHX3)X6]X2+X(aq)+4HX2OX(l)+2OHX−X(aq)
The addition of concentrated hydrochloric acid drop by drop to an aqueous solution of cobalt(II) ions results in the formation of a blue solution containing the tetrahedral complex [CoCl₄]²⁻(aq) (Figure 18.10).
Concentration of water [H₂O] being solvent (remains constant) is omitted from the Kstab expression. Stability constants are usually provided on a log₁₀ scale. This makes it easier to compare very large numbers. Higher the log₁₀ Kstab, more stable will be the complex and the equilibrium lies far to the right. And lower the log₁₀ Kstab, the complex is less stable, and the ligands can be easily displaced. The stability constant values (log₁₀ Kstab) of some copper (II) complexes are given Table 18.5.
Table 18.5 Stability constants of some Cu(II) complexes
Complex
log₁₀ Kstab
[CuCl₄]²⁻
5.6
[Cu(NH₃)₆]²⁻
13.1
[Cu(EDTA)]²⁻
18.8
swipe
The data shows that complexes with polydentate ligands have higher stability constant values than those with monodentate ligands. This is called chelating effect of the ligands.
[Cu(HX2O)X6(aq)]+3en[Cu(en)X3]+6HX2OX(l)
swipe[Cu(H₂O)₆(aq)] + 3en → [Cu(en)₃] + 6H₂O(l)
A ligand with a higher Kstab can displace a ligand with a lower Kstab. For example, adding ammonia to a chloride complex will turn the solution blue because the ammonia complex is significantly more stable.
Similarly, if a stable complex is diluted with a massive amount of water, the equilibrium can be forced back to the left, re-forming the original hydrated ion.
If concentrated ammonia solution is added, the light blue precipitate dissolves resulting in a dark blue solution.
Figure 18.7: Structure of [Cu(NH₃)₄(H₂O)₂]²⁺(aq) ion (original drawing after the textbook's Figure 18.7).
The structure of [Cu(NH₃)₄(H₂O)₂]²⁺(aq) is shown in Figure 18.7. Water ligands in [Cu(H₂O)₆]²⁺ can also be exchanged directly with ammonia by replacing four water molecules.
For simplicity, [Cu(NH₃)₄(H₂O)₂]²⁺ is usually written as [Cu(NH₃)₄]²⁺.
The chloride ions can also replace water ligands in [Cu(H₂O)₆]²⁺ on addition of concentrated hydrochloric acid drop by drop. A yellow solution is obtained that contains the complex ion [CuCl₄]²⁻ (Figure 18.8).
blue solution[Cu(HX2O)X6]X2+X(aq)+4ClX−X(aq)yellow solution[CuClX4]X2−+6HX2O
In practice, the species with the more positive E° value will be reduced (gain electrons). The species with the more negative (less positive) value will be oxidized (lose electrons).
The reaction splits into the following half-equations:
21IX2X(aq)+eX−IX−X(aq)E∘=+0.54V
swipe½I₂(aq) + e⁻ → I⁻(aq) E° = +0.54 V
CuX2+X(aq)+eX−CuX+X(aq)E∘=+0.15V
swipeCu²⁺(aq) + e⁻ → Cu⁺(aq) E° = +0.15 V
Typically, the I₂/I⁻ couple, with the higher E° value, would be more likely to undergo reduction. The Cu²⁺/Cu⁺ couple has a lower E°, suggesting Cu⁺ is a better reducing agent than I⁻.
However, the overall reaction proceeds forward despite a calculated negative net standard potential.
The reaction is driven forward because CuI formed is continuously precipitating out of the solution, which effectively removes the Cu⁺ product and shifts the equilibrium to the right (Le Chatelier's principle). The amount of I₂ formed in this reaction can be quantified by titrating it with a thiosulfate solution.