Circular and Rotational MotionCircular and Rotational Motion
Develops angular kinematics (radian, angular displacement/velocity/acceleration, relation to linear quantities, angular equations of motion), centripetal force and its applications (centrifuge, banked roads), artificial satellites (critical/orbital velocity, weightlessness, artificial gravity), moment of inertia, angular momentum and its conservation with applications (diver, skater, flywheel, gyroscope).
10 MCQs · 7 long questions · 9 short questions · 10 numericals · 10 constructed-response
The chapter's topics and page numbers follow the official textbook. Lessons, lectures and practice are added after academic review.
Lessons
3.1 Angular measurements
3.1 Angular Measurements · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 74 KB
Among all possible motions of the material bodies, the circular motion is one that appears to be working in the most of the natural world. Satellites moving in circular orbits around the Earth, orbital and spin motion of the Earth itself, a car turning around a curved road, and a stone whirled around by a string are the familiar examples. When objects move in circular paths, their direction is continuously changing. Since velocity is a vector quantity, this change of direction means that their velocities are not constant.
In this chapter, we will study, circular motion, rotational motion, moment of inertia, angular momentum and the related topics.
Figure 3.1: One radian, the angle at the centre O made by an arc AB equal to the radius r (original drawing after the textbook's Figure 3.1).
Consider an angle drawn at the centre ‘O’ of a circle by an arc ‘AB’ as shown in Fig. 3.1. If the length of the arc ‘AB’ is equal to the radius ‘r’ of the circle, then the angle is called one radian. It is the SI unit of angular measurement and its symbol is “rad”.
Applications of Centripetal Force · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.9 MB
Figure 3.8(a): A laboratory centrifuge (original drawing after the textbook's Figure 3.8(a)).
We know that an object moves in a circle because of centripetal force. If the magnitude of applied force falls short of required centripetal force then the object will move away from the centre of the circle. The centrifuge (Fig. 3.8-a) functions on this basic principle.
Figure 3.8(b): Sample tubes of a centrifuge, whose denser particles settle at the bottom (original drawing after the textbook's Figure 3.8(b)).
Centrifuge: It is one of the most useful laboratory device. It helps to separate out denser and lighter particles from a mixture. The mixture is rotated at high speed for a specific time. In a laboratory setup, sample tubes are used where the denser particles will settle at the bottom and lighter particles will rise to the top of the sample tubes (Fig. 3.8-b).
Examples of conservation of angular momentum
Examples of conservation of angular momentum · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 1.1 MB
A man diving from a diving board
Figure 3.18: A man diving from a diving board (original drawing after the textbook's Figure 3.18).Describe this diagram
The book prints this figure as a photo-sequence; it is redrawn here as a sketch.
A diver jumping from a springboard has to take a few somersaults in air before touching the water surface, as shown in Fig.3.18. After leaving the springboard, he curls his body by rolling arms and legs in. Due to this, his moment of inertia decreases, and he spins in midair with a large angular velocity. When he is about to touch the water surface, he stretches out his arms and legs. He enters the water at a gentle speed and gets a smooth dive. This is an example of the law of conservation of angular momentum.
The spinning ice skater
Equations of Angular Motion
Equations of Angular Motion · Reviewed lesson · version 1 · published 16 Nov 2026
The equations (3.2, 3.3, 3.4 and 3.5) of angular motion are exactly analogous to those in linear motion if θ, ω and α be replaced by S, v and a, respectively. As the other equations of linear motion were obtained by algebraic manipulation of these equations, it follows that analogous equations will also apply to angular motion. Given below are angular equations together with their linear counterparts.
Linear and angular equations
Linear Equations
Angular Equations
v_f = vᵢ + at
ω_f = ωᵢ + αt
(3.9)
2aS = v_f² − vᵢ²
2αθ = ω_f² − ωᵢ²
(3.10)
S = vᵢt + ½at²
θ = ωᵢt + ½αt²
(3.11)
swipe
Example of centripetal force
Example of centripetal force · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.5 MB
In every circular or orbital motion, centripetal force is needed which is provided by some agency.
When a ball is whirled in a horizontal circle with the help of a string, then tension in the string provides necessary centripetal force.
For an object placed on a turntable, the friction is the centripetal force.
The gravitational force is the cause of the Earth orbiting around the Sun, Moon and artificial satellites revolving around the Earth.
Tid-bits (PDF page 61): racing cars on a banked track (original drawing after the photograph printed in the textbook).
A normal or perpendicular magnetic force compels a charge particle moving along a straight path into a circular path.
When a vehicle takes turn on a road, it also needs centripetal force which is provided by the friction between the tyres and the road. If the road is slippery, then at high speed, the friction may not be sufficient enough to provided necessary centripetal force. Hence, vehicle will not be able to take turn and may skid or may even be toppled. To overcome this difficulty, the highway road is banked on turns. That is, the outer edge of the track is kept slightly higher than that of the inner edge.
Weightlessness in Satellites
Weightlessness in Satellites · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
When a satellite is launched by a rocket in its desired orbit around the Earth, then it has been observed practically that everything inside the satellite experiences weightlessness because the satellite is accelerating towards the centre of the Earth as a freely falling body.
Figure 3.13: A mass on a spring balance inside a satellite orbiting the Earth (original drawing after the textbook's Figure 3.13).
Consider a satellite of mass M revolving in its orbit of radius r around the Earth. A body of mass m inside the satellite suspended by a spring balance from the ceiling of the satellite is under the action of two forces. That is, its weight mg acting downward, while the supporting force, called normal force F_N or tension in the spring acting upward, as shown in Fig. 3.13. Their resultant force is equal to the centripetal force required by the mass m which is acting towards the centre of the Earth, and is expressed as:
Angular Velocity
Angular Velocity · Reviewed lesson · version 1 · published 16 Nov 2026
Very often, we are interested in knowing how fast or how slow a body is rotating. It is determined by its angular velocity defined as the rate at which the angular displacement is changing with time. Referring to Fig. 3.2(c), if Δθ is the angular displacement during the time interval Δt, the average angular velocity ω_av during this interval is given by
ωav=ΔtΔθ(3.2)
swipeω_av = Δθ/Δt ..... (3.2)
3.6 Law of conservation of angular momentum
3.6 Law of Conservation of Angular Momentum · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 86 KB
Ltotal=L1+L2+⋯=constant
swipeL_total = L₁ + L₂ + .... = constant
Orbital Velocity
Orbital Velocity · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Figure 3.12: A satellite going round the Earth in a circular orbit (original drawing after the textbook's Figure 3.12).
Figure 3.12 shows a satellite going round the Earth in a circular path. Let the mass of the satellite be mₛ and v is its orbital speed. The mass of the Earth is M and r represents the radius of the orbit. A centripetal force mₛv²/r is required to hold the satellite in the orbit. This force is provided by the gravitational force of attraction between the Earth and the satellite. Equating the gravitational force to the required centripetal force, we have
r2GmsM=rmsv2
swipeG mₛ M / r² = mₛ v² / r
Artificial Gravity
Artificial Gravity · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.4 MB
In a gravity free space, there will be no force that will push anybody to any side of the spacecraft. If this spacecraft is to stay in the orbit over an extended period of time, the weightlessness may affect the performance of the astronauts present in that spacecraft. To overcome this difficulty, an artificial gravity can be created in the spacecraft. This could enable the crew of the space ships to function in an almost normal manner. For this situation to prevail, the spaceship is set into rotation around its own axis. The astronaut then is pressed towards the outer rim and exerts a force on the 'floor' of the spaceship in much the same way as on the Earth.
Figure 3.14: A wheel-shaped spaceship rotating about its central axis (original drawing after the textbook's Figure 3.14).
Consider a spacecraft of the shape as shown in Fig. 3.14. The outer radius of the spaceship is R and it rotates around its own central axis with angular speed ω, then its angular acceleration a꜀ is
ac=Rω2
swipea꜀ = Rω²
3.2 Centripetal force
3.2 Centripetal Force · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.5 MB
Figure 3.6(a): A ball tied to a string and whirled in a horizontal circle (original drawing after the textbook's Figure 3.6(a)).
Figure 3.6(b): If the string snaps at A, the ball moves along the tangent AB (original drawing after the textbook's Figure 3.6(b)).
Newton's second law of motion states that when a force acts on a body, it produces acceleration in the same direction. A force acting on a moving body along the direction of its velocity will change magnitude of the velocity (speed) keeping the direction unchanged. On the other hand, a constant force acting perpendicular to the velocity of a body moving in a circular path will change the direction but magnitude of velocity (speed) will remain the same. Such force makes the body move in a circle by producing a radial (or centripetal) acceleration and is called centripetal force (Centre seeking) force. Figure 3.6(a) shows a ball tied at the end of a string is whirled in a horizontal surface. It would not continue in a circular path if the string is snapped. Careful observation shows at once that if the string snaps, when the ball is at the point A, in Fig. 3.6 (b), the ball will follow the straight line path AB which is tangent AB at point A.
3.5 Angular momentum
3.5 Angular Momentum · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
We have already seen that linear momentum plays an important role in translational motion of bodies. Similarly, another quantity known as angular momentum has important role in the study of rotational motion.
The angular momentum L of a particle of mass m moving with velocity v and momentum p (Fig. 3.16) relative to the origin O is defined as:
L=r×p(3.20)
swipeL = r × p ..... (3.20)
Angular acceleration
Angular acceleration · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 48 KB
When we switch on an electric fan, we notice that its angular velocity goes on increasing. We say that it has an angular acceleration. We define angular acceleration as the rate of change of angular velocity. If ωᵢ and ω_f are the values of instantaneous velocity of a rotating body at instants tᵢ and t_f, the average angular acceleration during the interval t_f − tᵢ is given by
3.4 Moment of Inertia · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.5 MB
Figure 3.15: The force F causes a torque about the axis O and gives the mass m an angular acceleration alpha about the pivot point (original drawing after the textbook's Figure 3.15).
Consider a mass m attached to the end of a massless rod as shown in Fig. 3.15. Assume that the bearing at the pivot point O is frictionless. Let the system be in a horizontal plane. A force F is acting on the mass perpendicular to the rod and hence, this will accelerate the mass according to:
F=ma
swipeF = ma
In doing so, the force will cause the mass to rotate about O. Since tangential acceleration a_T is related to angular acceleration α by the equation.
aT=rα
swipea_T = rα
3.3 Artificial satellites
3.3 Artificial Satellites · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
For Your Information (PDF page 62): Satellites Orbits (original drawing after the textbook's figure in this box).
Satellites are objects that orbit in nearly circular path around the Earth. They are put into orbit by rockets and are held in orbits by the gravitational pull of the Earth. The low flying Earth satellites have acceleration 9.8 m s⁻² towards the centre of the Earth. If there is no gravitational pull, they would fly off in a straight line along tangent to the orbit. When the satellite is moving in a circle, it has an acceleration v²/r. In a circular orbit around the Earth, the centripetal acceleration is supplied by gravity and we have
g=Rv2(3.14)
swipeg = v²/R ..... (3.14)
Angular Displacement
Angular Displacement · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
Consider the motion of a single particle P of mass m in a circular path of radius r. Suppose this motion is taking place by attaching the particle P at the end of a massless rigid rod of length r whose other end is pivoted at the centre O of the circular path, as shown in Fig. 3.2 (a). As the particle is moving on the circular path, the rod OP rotates in the plane of the circle. The axis of rotation passes through the pivot O and is normal to the plane of rotation. Consider a system of axes as shown in Fig. 3.2 (b). The z-axis is taken along the axis of rotation with the pivot O as origin of coordinates. Axes x and y are taken in the plane of rotation. While OP is rotating, suppose at any instant t, its position is OP₁, making angle θ with x-axis. At a later time t + Δt, let its position be OP₂ making angle θ + Δθ with x-axis (Fig. 3.2-c).
Figure 3.2(a): Particle P at the end of a rod OP of length r moving on a circle (original drawing after the textbook's Figure 3.2(a)).
Figure 3.2(b): Axes for the rotation: z along the axis of rotation through O, x and y in the plane of rotation (original drawing after the textbook's Figure 3.2(b)).
Relation between Angular and Linear Velocities
Relation between Angular and Linear Velocities · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.7 MB
Figure 3.5(a): A rigid body rotating about the z-axis with angular velocity ω (original drawing after the textbook's Figure 3.5(a)).
Consider a rigid body rotating about z-axis with an angular velocity ω as shown in Fig. 3.5 (a).
Figure 3.5(b): Point P moves through the arc P₁P₂ = ΔS while OP turns through Δθ (original drawing after the textbook's Figure 3.5(b)).
Imagine a point P in the rigid body at a perpendicular distance r from the axis of rotation. OP represents the reference line of the rigid body. As the body rotates, the point P moves along a circle of radius r with a linear velocity v whereas the line OP rotates with angular velocity ω as shown in Fig. 3.5 (b). We are interested in finding out the relation between ω and v. As the axis of rotation is fixed, so the direction of ω always remains the same and ω can be manipulated as a scalar. As regards the linear velocity of the point P, we consider its magnitude only which can also be treated as a scalar.
P1P2=ΔS
swipeP₁P₂ = ΔS
Figure 3.9: The dryer of a washing machine (original drawing after the textbook's Figure 3.9).
The dryer of the washing machine also functions on the principle of centrifuge. The dryer consists of a long cylinder with hundreds of small holes on its wall. Wet clothes are piled up in this cylinder, which is then rotated rapidly about its axis. Water moves outward to the walls of the cylinder and thus, drained out through the holes. In this way, clothes become dry quickly.
Figure 3.10: A cream separator (original drawing after the textbook's Figure 3.10).
Cream separator is another practical device which is used to separate cream form the milk. In this machine, milk is whirled rapidly. Since milk is a mixture of light and heavy particles, when it is rotated, the light particles gather near the axis of rotation whereas the heavy particles will go outwards and hence, cream can easily be separated from milk.
Figure 3.19: An ice skater using angular momentum (original drawing after the textbook's Figure 3.19).
An ice skater as shown in Fig.3.19 can increase his angular velocity by folding arms and bringing the stretched leg close to the other leg. By doing so, he decreases his moment of inertia. As a result, angular speed increases. When he stretches his hands and a leg outward, the moment of inertia increases and hence angular velocity decreases.
A person holding some weight in his hands standing on a turntable.
A person is standing on a turntable with heavy mass (dumb-bell) in his hands stretched out on both sides as shown in Fig. 3.20. As he draws his hands inward, his angular speed at once increases. This is because the moment of inertia decreases on drawing the hands inwards, which increases the angular speed.
Figure 3.20: Man with masses in his hands on a turntable; conservation of angular momentum requires that as the man pulls his arms in, the angular velocity increases (original drawing after the textbook's Figure 3.20).Describe this diagram
The book prints this figure as two photographs; it is redrawn here as a sketch.
Flywheel
Flywheel is a mechanical device which consists of a heavy wheel with an axle (Fig. 3.21). It is used to store rotational energy, smooth out output fluctuations and provides stability in a wide range of applications such as bicycles and other vehicles, industrial machinery, gyroscopes, ships and spacecrafts.
Figure 3.21: A flywheel (original drawing after the textbook's Figure 3.21).Describe this diagram
The book prints this figure as a photograph; it is redrawn here as a sketch.
Point to Ponder (PDF page 70): why does the coasting rotating system slow down as water drips into the beaker? (original drawing after the textbook's figure in this box).
When a fly wheel spins, its angular momentum resists changes to its orientations, maintaining stability. This is useful in systems that need precise control over their orientation without external interference.
The Gyroscope
Figure 3.22: The gyroscope (original drawing after the textbook's Figure 3.22).
Figure 3.23: A tilted gyroscope (original drawing after the textbook's Figure 3.23).
A gyroscope is a device which is used to maintain its orientation relative to the Earth's axis or resists changes in its orientation. It consists of a mounted flywheel pivoted in supporting rings as shown in Fig. 3.22. It works on the basis of law of conservation of angular momentum due to its large moment of inertia. When the gyroscope spins at a large angular speed, it gains large angular momentum. It is then difficult to change the orientation of the gyroscope's rotational axis due to its large moment of inertia. A change in orientation requires a change in its angular momentum. To change the direction of a large angular momentum, a corresponding large torque is required. Even if gyroscope is tilted (Fig. 3.23), it still keeps levitated without falling. Hence, it is a reason why a gyroscope can be used to maintain orientation. The main applications of gyroscope are in the guiding system of aeroplanes, submarines and space vehicles in order to maintain a specific direction in space to keep steady course.
The angular equations 3.9 to 3.11 hold true only in the case when the axis of rotation is fixed, so that all the angular vectors have the same direction. Hence, they can be manipulated as scalars.
Example 3.1
An electric fan rotating at 3 rev s⁻¹ is switched OFF. It comes to rest in 18.0 s. Assuming deceleration to be uniform, find its value. How many revolutions did it turn before coming to rest?
Solution: In this problem, we have
ωᵢ = 3.0 rev s⁻¹, ω_f = 0, t = 18.0 s and α = ?, θ = ?
Astronaut floating inside the cabin of a spaceship (original drawing after the photograph printed in the textbook).
It may be noted that the centripetal force responsible for the revolution of the satellite around the Earth is provided by the gravitational force of attraction between the Earth and the satellite.
Fg=Fc
swipeF_g = F꜀
Mg=rMv2
swipeMg = Mv²/r
g=rv2
swipeg = v²/r
Hence, Eq. 3.16(a) becomes:
mg=mg−FN
swipemg = mg − F_N
orFN=0
swipeor F_N = 0
This shows that the supporting force which is acting on a body inside the satellite is zero. Therefore, the bodies as well as the astronauts in a satellite find themselves in a state of apparent weightlessness.
The instantaneous angular velocity ω is the limit of the ratio Δθ/Δt as Δt, approaches to zero.
Thusω=Δt→0limΔtΔθ(3.3)
swipeThus ω = lim (Δt → 0) Δθ/Δt ..... (3.3)
In the limit when Δt approaches zero, the angular displacement would be infinitesimally small. So, it would be a vector quantity and the angular velocity as defined by Eq. 3.3 would also be a vector. Its direction is along the axis of rotation and is given by right hand rule as described earlier.
The law of conservation of angular momentum is one of the fundamental principles of Physics. It has been verified from the cosmological to the sub microscopic level. The effect of the law of conservation of angular momentum is readily apparent if a single isolated spinning body alters its moment of inertia.
Do You Know (PDF page 68): the ball's speed increases as the string wraps around the finger (original drawing after the textbook's figure in this box).
If a body of moment of inertia I₁, spinning with angular speed ω₁ alters its moment of inertia to I₂, then its angular speed ω₂ also changes so that its angular momentum remains constant.
HenceI1ω1=I2ω2
swipeHence I₁ω₁ = I₂ω₂
The angular momentum is a vector quantity with direction along the axis of rotation. Hence, the direction of angular momentum along the axis of rotation also remains fixed. This is illustrated by the fact given below:
This fact is of great importance for the Earth as it moves around the Sun. No other sizeable torque is experienced by the Earth, because the major force acting on it is the pull of the Sun. The Earth's axis of rotation, therefore, remains fixed in one direction with reference to the universe around us.
This shows that the mass of the satellite is unimportant in describing the satellite's orbit. Thus, any satellite orbiting at distance r from the Earth's centre must have the orbital speed given by Eq. 3.15. Any speed less than this will bring the satellite tumbling back to the Earth.
Example 3.4
An Earth satellite is in circular orbit at distance of 384,000 km from the Earth's surface. What is its period of one revolution in days? Take mass of the Earth M = 6.0 × 10²⁴ kg and its radius R = 6400 km.
Solution:
As r = R + h = (6400 + 384000) = 390400 km
Using v = √(GM/r) = √(6.67 × 10⁻¹¹ N m² kg⁻² × 6 × 10²⁴ kg / 390400 km)
= 1.025 km s⁻¹
Also
T = 2πR/v = 2 × 3.14 × 390400 km × 1/(1.025 km s⁻¹) × 1 day/(60 × 60 × 24 s)
Tid-bits (PDF page 63): Bruce McCandless free-floating in space, 1984 (original drawing after the photograph printed in the textbook).
Do You Know (PDF page 59): direction of motion changes continuously in circular motion (original drawing after the textbook's figure in this box).
Thus, a force is needed to change the direction of velocity or motion of a body continuously at each point in circular motion moving with uniform speed. The force that does not alter speed but only direction at each point is a perpendicular force which acts along the radius of the circular path. This force always pulls the object towards the centre of the circular path. Its direction is perpendicular to the tangential velocity at each point.
For a body of mass m moving with velocity v in a circular path of radius r, centripetal force F꜀ is given by
Fc=mac=rmv2(3.12)
swipeF꜀ = ma꜀ = mv²/r ..... (3.12)
where a = v²/r is the centripetal acceleration and its direction is towards the centre of the circle. As v = rω, so the above equation becomes:
Fc=mrω2(3.13)
swipeF꜀ = mrω² ..... (3.13)
Example 3.2
If a CD spins at 210 rpm, what is the radial acceleration of a point on the outer rim of the CD? The CD is 12 cm in diameter.
Solution: We convert 210 rpm into a frequency in revolutions per second (Hz).
For each revolution, the CD rotates through an angle of 2π radians. The angular velocity is:
ω = 2πf = 2π rev/min × 3.5 min/s = 7.0 π rad s⁻¹
The radial acceleration is:
Do You Know? (PDF page 60): stunt aircraft in curved flight (original drawing after the photograph printed in the textbook).
a = ω²r = (7.0π rad s⁻¹)² × 0.06 m = 29 m s⁻²
Example 3.3
A ball tied to the end of a string, is swung in a vertical circle of radius r under the action of gravity as shown in Fig. 3.7. What will be the tension in the string when the ball is at the point A of the path and its speed is v at this point?
Solution: For the ball to travel in a circle, the force acting on the ball must provide the required centripetal force. In this case, at point A, two forces act on the ball, the pull of the string and the weight w of the ball. These forces act along the radius at A, and so their vector sum must furnish the required centripetal force. We, therefore, have
T + w = mv²/r as w = mg, therefore,
∴ T = mv²/r − mg = m(v²/r − g)
If v²/r = g, then T will be zero and the centripetal force is just equal to the weight.
Figure 3.7: A ball whirled in a vertical circle: at the top point A, the tension T and weight w both act along AO (original drawing after the textbook's Figure 3.7).
Figure 3.16: angular momentum L = r x p of a particle about O (original drawing after the textbook's figure).
where r is the position vector of the particle at that instant relative to the origin O. Angular momentum is a vector quantity. Its magnitude is:
L=rpsinθ=mrvsinθ
swipeL = rp sinθ = m rv sinθ
For Your Information (PDF page 67): the rotating sphere and the right-hand rule for L and ω (original drawing after the textbook's figure in this box).
where θ is the angle between r and p. The direction of L is perpendicular to the plane formed by r and p and its sense is given by the right hand rule of vector product. SI unit of angular momentum is kg m² s⁻¹ or J s.
If the particle is moving in a circle of radius r with uniform angular velocity ω, then angle between r and tangential velocity is 90°. Hence,
L=mrvsin90∘=mrv
swipeL = mrv sin 90° = mrv
Butv=rωHenceL=mr2ω
swipeBut v = rω Hence L = mr²ω
Figure 3.17: A symmetric rigid body rotating about a fixed axis through its centre of mass (original drawing after the textbook's Figure 3.17).
Now consider a symmetric rigid body rotating about a fixed axis through the centre of mass as shown in Fig 3.17. Each particle of the rigid body rotates about the same axis in a circle with an angular velocity ω. The magnitude of the angular momentum of the particle of mass mᵢ is mᵢvᵢrᵢ about the origin O. The direction of Lᵢ is the same as that of ω. Since vᵢ = rᵢω, the angular momentum of the ith particle is mᵢrᵢ²ω. Summing this over all particles gives the total angular momentum of the rigid body.
L=(i=1∑nmiri2)ω=Iω
swipeL = (Σᵢ₌₁ⁿ mᵢrᵢ²) ω = Iω
where I is the moment of inertia of the rigid body about the axis of rotation.
Example 3.5
The mass of Earth is 6.00 × 10²⁴ kg. The distance r from Earth to the Sun is 1.50 × 10¹¹ m. As seen from the direction of the North Star, the Earth revolves counter-clockwise around the Sun. Determine the orbital angular momentum of the Earth about the Sun, assuming that it traverses a circular orbit about the Sun once a year (3.16 × 10⁷ s).
Solution: To find the Earth's orbital angular momentum, we must first know its orbital speed from the given data. When the Earth moves around a circle of radius r, it travels a distance of 2πr in one year, its orbital speed vₒ is thus, vₒ = 2πr/t
Orbital angular momentum of the Earth = Lₒ = mvₒr
= 2πr²m/t
= 2π(1.50 × 10¹¹ m)² × (6.00 × 10²⁴ kg) / 3.16 × 10⁷ s
= 2.67 × 10⁴⁰ kg m² s⁻¹
The sign is positive because the revolution is counter clockwise.
The instantaneous angular acceleration is the limit of the ratio Δω/Δt as Δt approaches zero. Therefore, instantaneous angular acceleration α is given by
α=Δt→0limΔtΔω(3.5)
swipeα = lim (Δt → 0) Δω/Δt ..... (3.5)
The angular acceleration is also a vector quantity whose magnitude is given by Eq. 3.5 and its direction is along the axis of rotation. Angular acceleration is expressed in rad s⁻².
Figure 3.4: A rigid body rotating about an axis; OP, perpendicular from P to the axis, is the reference line (original drawing after the textbook's Figure 3.4).
Till now we have been considering the motion of a particle P on a circular path. The point P was fixed at the end of a rotating massless rigid rod. Now consider the rotation of a rigid body as shown in Fig. 3.4. Imagine a point P on the rigid body. Line OP be the perpendicular dropped from P on the axis of rotation usually referred as the reference line. As the body rotates, line OP also rotates with the same angular velocity and angular acceleration. Thus, the rotation of a rigid body can be described by the rotation of the reference line OP and all the terms that we defined with the help of rotating line OP are also valid for the rotational motion of a rigid body. Henceforth, while dealing with rotation of a rigid body, we will replace it by its reference line OP.
As turning effect is produced by torque τ, it would, therefore, be better to write the equation for rotation in terms of torque. This can be done by multiplying both sides of the above equation by r. Thus,
rF=τ=torque=mr2α
swiperF = τ = torque = mr²α
which is rotational analogue of the Newton's second law of motion, F = ma.
Do You Know (PDF page 66): two cylinders of equal mass; the one with the larger diameter has the greater rotational inertia (original drawing after the textbook's figure in this box).
Here F is replaced by τ, a by α and m by mr². The quantity mr² is known as the moment of inertia and is represented by I. The moment of inertia plays the same role in angular motion as the mass in linear motion. It may be noted that moment of inertia depends not only on mass m but also on r².
Most rigid bodies have different mass concentration at different distances from the axis of rotation, which means the mass distribution is not uniform. As shown in Fig. 3.16(a), the rigid body is made up of n small pieces of masses m₁, m₂, .... at distances r₁, r₂, ..... from the axis of rotation O. Let the body be rotating with the angular acceleration α, so the magnitude of the torque acting on m₁ is
τ1=m1r12α1
swipeτ₁ = m₁r₁²α₁
Similarly, the torque on m₂ is
τ2=m2r22α2
swipeτ₂ = m₂r₂²α₂
and so on.
Figure 3.16: Each small piece of mass within a large, rigid body undergoes the same angular acceleration about the pivot point (original drawing after the textbook's Figure 3.16).
For Your Information (PDF page 66): moments of inertia of various bodies about axis AA' (original drawing after the textbook's figure in this box).
Since the body is rigid, so all the masses are rotating with the same angular acceleration α.
Total torque τ_total is then given by
τtotal=(m1r12+m2r22+⋯+mnrn2)α
swipeτ_total = (m₁r₁² + m₂r₂² + .... + mₙrₙ²)α
=(i=1∑nmiri2)α
swipe= (Σᵢ₌₁ⁿ mᵢrᵢ²)α
orτ=Iα(3.18)
swipeor τ = Iα ..... (3.18)
where I is the moment of inertia of the body and is expressed as
where v is the orbital velocity and R is the radius of the Earth (6400 km). From Eq. 3.14, we have
v=gR
swipev = √(gR)
=9.8m s−2×6.4×106m
swipe= √(9.8 m s⁻² × 6.4 × 10⁶ m)
=7.9×103m s−1=7.9km s−1
swipe= 7.9 × 10³ m s⁻¹ = 7.9 km s⁻¹
This is the minimum velocity necessary to put a satellite into the orbit, called the critical velocity. The period T is given by
T=v2πR=2×3.14×7.9km s−16400km
swipeT = 2πR/v = 2 × 3.14 × 6400 km / 7.9 km s⁻¹
=5060s=84min approx.
swipe= 5060 s = 84 min approx.
Figure 3.11: A satellite at a height h much greater than the Earth's radius R (original drawing after the textbook's Figure 3.11).
If, however, a satellite in a circular orbit is at a distance h much greater than R above the Earth's surface, we must take into account the experimental fact that the gravitational acceleration decreases inversely as the square of the distance from the centre of the Earth (Fig. 3.11).
The higher the satellite, the slower will be the required speed and longer it will take to complete one revolution around the Earth.
Figure 3.2(c): Position OP₁ at angle θ and, a time Δt later, OP₂ at θ + Δθ (original drawing after the textbook's Figure 3.2(c)).
Figure 3.2(d): Right-hand rule for the direction of angular displacement (original drawing after the textbook's Figure 3.2(d)).
The angular displacement Δθ is assigned a positive sign when the sense of rotation of OP is counter clock wise.
The direction associated with Δθ is along the axis of rotation and is given by right hand rule as shown in Fig 3.2 (d) which states that:
Three units are generally used to express angular displacement, namely degrees, revolution and radian. Consider an arc of length S of a circle of radius r (Fig. 3.3) which subtends an angle θ at the centre of the circle. Its value in radians (rad) is given as:
θ=rS
swipeθ = S/r
orS=rθ(where θ is in radian)(3.1)
swipeor S = rθ (where θ is in radian) ..... (3.1)
Figure 3.3: An arc PP₁ of length S subtends an angle θ at the centre O of a circle of radius r (original drawing after the textbook's Figure 3.3).
If OP is rotating, the point P covers a distance S = 2πr in one revolution of P. In radian, it would be:
Do You Know (PDF page 57): as the wheel turns through an angle θ, it lays out a tangential distance S = r θ (original drawing after the textbook's figure in this box).
Suppose during the course of its motion, the point P moves through a distance P₁P₂ = ΔS in a time interval Δt during which reference line OP covers an angular displacement Δθ radian. So, ΔS and Δθ are related by Eq. 3.1 as:
ΔS=rΔθ
swipeΔS = rΔθ
Point to Ponder (PDF page 58): a roller coaster loop (original drawing after the photograph printed in the textbook).
Dividing both sides by Δt
ΔtΔS=rΔtΔθ(3.6)
swipeΔS/Δt = r Δθ/Δt ..... (3.6)
In the limit when Δt → 0 the ratio ΔS/Δt represents v, the magnitude of the velocity with which point P is moving on the circumference of the circle. Similarly Δθ/Δt represents the angular velocity ω of the reference line OP. So, Eq. 3.6 becomes:
v=rω(3.7)
swipev = rω ..... (3.7)
From Fig. 3.5(b), it can be seen that the point P is moving along the arc P₁P₂. In the limit when Δt → 0, the length of arc P₁P₂ becomes very small and its direction represents the direction of tangent to the circle at point P₁. Thus, the velocity with which point P is moving on the circumference of the circle has a magnitude v and its direction is always along the tangent to the circle at that point. That is why, the linear velocity of the point P is also known as tangential velocity.
Similarly, Eq. 3.7 shows that if the reference line OP is rotating with an angular acceleration α, the point P will also have a linear or tangential acceleration aₜ. Using Eq. 3.7 it can be shown that the two accelerations are related by
at=rα(3.8)
swipeaₜ = rα ..... (3.8)
Eqs. 3.7 and 3.8 show that on a rotating body, points that are at different distances from the axis do not have the same speed or acceleration, but all points on a rigid body rotating about a fixed axis do have the same angular displacement, angular speed and angular acceleration at any instant. Thus, by the use of angular variables, we can describe the motion of the entire body in a simple way.