Water's polarity explains its thermal stability, solvent power and amphoteric behaviour; DO, BOD and COD measure quality. The unit classifies pollution sources and pollutants (microbes, heavy metals, pesticides, nutrients, oil, plastics), their health and ecological effects, wastewater treatment stages, conservation strategies and Punjab's legal framework.
2. Nutrient Overload (Eutrophication) · Reviewed lesson · version 1 · published 16 Nov 2026
Nutrient overload from water pollution, especially excess nitrogen and phosphorus from fertilizers and sewage, leads to a rapid growth of algae, which block sunlight and reduce oxygen levels in the water. Eutrophication disrupts ecosystems, kills fish and other marine species, and damages water quality.
33.7.1 Pollution Control · Reviewed lesson · version 1 · published 16 Nov 2026
It can be done by the following strategies.
Imposing strict discharge standards for industries and municipalities to prevent harmful pollutants from entering water bodies.
By upgrading and expanding sewage treatment plants (STPs), installing Effluent Treatment Plants (ETPs), and adopting modern technologies, such as membrane filtration and bioreactors.
By continuous water quality monitoring, which enables the detection of pollutants, ensuring timely responses to contamination events.
By implementing strict penalties for polluters and offering incentives for clean practices. This approach discourages environmental violations while encouraging industries and communities to adopt sustainable, pollution-free operations.
33.5 Effect of Water Pollution on the Environment · Reviewed lesson · version 1 · published 16 Nov 2026
Pollutants can alter the physical and chemical properties of water, making it difficult for plants and animals to survive. Common environmental impacts include loss of biodiversity, habitat destruction, disruption of food chains, and decline in water quality.
5. Recreational Activities · Reviewed lesson · version 1 · published 16 Nov 2026
Recreational activities such as boating, swimming, and camping can contribute to water pollution if not properly managed. Boats often release oil, fuel, and other chemicals into the water, harming aquatic life. Littering by visitors, including plastics, food wrappers, and other waste, can pollute lakes and rivers.
iv. Reverse Osmosis (RO) and Ion Exchange Methods · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
For the production of high-purity water, such as that required in laboratory settings or regions with high salinity, reverse osmosis (RO) and ion exchange method are utilized.
The RO method uses a semi-permeable membrane, which filters out dissolved salts, bacteria, and other impurities under pressure. Ion exchange is an important technology for “softening” water. Hard water contains high concentrations of Ca²⁺ and Mg²⁺ ions, which interfere with industrial processes and soap efficiency. In an ion-exchange column, these ions are swapped for Na⁺ or H⁺ ions.
Figure 33.4: A sketch of water treatment plant (original drawing after the textbook's Figure 33.4).
33.1 Properties and Quality of Water · Reviewed lesson · version 1 · published 16 Nov 2026
The chemical and physical properties of water are central to studying the nature and extent of pollution in the water bodies. The water molecule (H₂O) is a permanent dipole. This polarity renders water unique properties essential for life and the environment. Some peculiar features of water that emerge from its structure are discussed here.
4. Soil Degradation and Plant Life Damage · Reviewed lesson · version 1 · published 16 Nov 2026
Water pollution significantly contributes to soil degradation and damages plant life. Contaminants like heavy metals, industrial waste, and excessive nutrients seep into the soil, altering its structure and fertility. Accumulated chemicals disrupt the soil's natural microbial activity, essential for plant health. Plants exposed to polluted water may exhibit stunted growth, leaf discoloration, and even die.
1. Industrial Activities · Reviewed lesson · version 1 · published 16 Nov 2026
Industrial activities are the major source of water pollution. Factories often discharge harmful chemicals, heavy metals, and toxic waste directly into rivers, lakes, and oceans. The common industries that release pollution, are oil refineries, chemical plants, automobile industry, fertilizers, tanneries, etc.
2. Chemical Pollutants (Heavy Metals and Pesticides)
2. Chemical Pollutants (Heavy Metals and Pesticides) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.7 MB
a) Heavy Metals
Boiling can kill most of bacteria, viruses and protozoa to make water drinkable. But other pollutants cannot be removed by boiling only. (Original drawing after the textbook's illustration.)
This type of pollution often includes toxic heavy metals like mercury, lead, arsenic, and cadmium and agricultural chemicals such as pesticides and herbicides. Heavy metals can enter water systems through industrial discharge, mining operations, and improper waste disposal. Sources of some heavy metals are given below.
Mercury can enter water primarily from coal combustion, gold mining, and industrial waste from thermometer or battery manufacturing. In aquatic sediments, bacteria convert inorganic mercury into methylmercury ([CH₃Hg]⁺), which is more dangerous.
The major sources of lead are leaded petrol (which is now banned worldwide); old plumbing (lead pipes), lead-acid batteries, and paints. Lead ions (Pb²⁺) often enter water systems through the corrosion of pipes.
Metal plating, plastic stabilisers, and phosphate fertilizer impurities are major sources of cadmium in water. These chemicals are usually is non-biodegradable nature and can accumulate in the food chain, posing long-term risks to aquatic life and humans, equally.
iv. Oxygen in Water
iv. Oxygen in Water · Reviewed lesson · version 1 · published 16 Nov 2026
The oxygen gas plays crucial role in water. It is an indicator of water quality and the level of pollution. Oxygen in water can be interpreted based on its different roles.
Dissolved oxygen (DO) is a key indicator of water quality and aquatic ecosystem health. It refers to the amount of oxygen available in water for aquatic organisms to breathe. High DO levels generally indicate clean, unpolluted water, while low levels may suggest pollution or excessive organic matter decomposition.
Biochemical Oxygen Demand (BOD) is the amount of oxygen required by microorganisms to break down organic matter in water over a specific period, usually five days at 20°C. It is a key indicator of the level of organic pollution in water. High BOD values indicate a large amount of organic matter, suggesting heavy pollution, which can deplete dissolved oxygen and harm aquatic life.
Chemical Oxygen Demand (COD) is the amount of oxygen required to chemically oxidise organic and inorganic substances in water, using oxidising agents (KMnO₄, K₂Cr₂O₇, etc.). High COD values indicate a high concentration of oxidisable chemical pollutants, suggesting poor water quality and potential contamination from industrial or domestic waste. COD is useful for assessing the total pollution load in water.
The following table outlines the typical ranges for these parameters across different types of water sources.
Table 33.1 Typical ranges of DO, BOD, and COD in water
Water Type
DO (Dissolved Oxygen) mg/L
iii. Amphoteric Nature
iii. Amphoteric Nature · Reviewed lesson · version 1 · published 16 Nov 2026
The ability of water to act as both an acid and a base is also important for water quality. The self-ionisation of water (Kw = 1.0 × 10⁻¹⁴ at 25°C) provides the baseline for the pH scale. Most of the aquatic life is highly sensitive to pH fluctuations. For example, pollution in the form of acid rain, caused by the dissolution of sulphur dioxide (SO₂) and nitrogen oxides (NOₓ), increases the concentration of hydronium ions (H₃O⁺). This acidity can mobilise toxic heavy metal compounds, such as aluminium hydroxide and lead salts, from sediments into the water column by increasing their solubility through protonation or by displacing them from mineral surfaces.
Introduction · Reviewed lesson · version 1 · published 16 Nov 2026
Water is the foundation of life. It keeps humans alive and healthy through hydration and hygiene, and removes toxic materials from the body. It allows plants to perform photosynthesis and supports agriculture by enabling crop growth. Animals rely on it to regulate body functions, and countless microorganisms depend on it for survival. Human development, agriculture, and food security all revolve around a steady supply of water. In nature, water shapes the land, maintains a balance in the climate, and recharges underground reservoirs. Ecosystems like rivers, lakes, wetlands, and oceans rely on water to support diverse plant and animal life. It is vital for energy production, transportation, urban development, and scientific research. Water scarcity threatens the environment, communities, and economies.
v. Redox Potential · Reviewed lesson · version 1 · published 16 Nov 2026
The redox potential of water is a measure of the oxidising and reducing nature of a water body. In well-oxygenated water, chemical species exist in their most oxidised forms, such as SO₄²⁻ and CO₂. However, in polluted or stagnant water, where oxygen is depleted, the environment becomes reducing. This leads to the formation of toxic substances like hydrogen sulphide (H₂S) and ammonia (NH₃). Understanding these chemical equilibria and the molecular behaviour of H₂O allows us to predict how specific contaminants will migrate, transform, and ultimately impact the global water supply.
Quick Check 33.1
2. Agricultural Activities
2. Agricultural Activities · Reviewed lesson · version 1 · published 16 Nov 2026
Agricultural activities contribute significantly to water pollution through the runoff of fertilizers, pesticides, and herbicides into nearby water bodies. Poor irrigation practices can increase soil erosion, washing sediments into rivers and streams. In many areas, drainage from farmlands carries pollutants that contaminate both surface and groundwater sources.
33.8 Rules and Regulations regarding Waste Pollution and Conservation
33.8 Rules and Regulations regarding Waste Pollution and Conservation · Reviewed lesson · version 1 · published 16 Nov 2026
The Government of Punjab has made several acts and laws to address the water pollution within its jurisdiction. The Punjab Environmental Protection Agency (EPA) Punjab regularly issues relevant rules and regulations for all concerned stakeholders. Below is a comprehensive overview of the key self-explanatory rules and regulations issued by EPA Punjab (Pakistan) related to water pollution control and conservation.
Table 33.3 Key environmental regulations and conservation measures
Act / Regulation
Primary Scope and Powers
Penalties for Non-Compliance
Punjab Environmental Protection Act, 1997
Pollution prevention.
Fines up to Rs 5 million, plus additional daily fines of up to Rs 100,000.
Punjab Water Act, 2019
Prohibits discharging pollutants or blocking flow.
Up to 3 months imprisonment and/or a Rs 500,000 fine.
I. Screening and Sedimentation
I. Screening and Sedimentation · Reviewed lesson · version 1 · published 16 Nov 2026
The initial stage of water treatment typically involves screening and sedimentation. Large insoluble particles are removed by passing water through metal screens. This is followed by sedimentation, where water is held in large tanks to allow suspended solids to settle at the bottom under the influence of gravity.
iii. Filtration · Reviewed lesson · version 1 · published 16 Nov 2026
Once the bulk of the solids has been removed, the water undergoes filtration. This is a mechanical process designed to remove the remaining fine suspended matter and some microorganisms. In a standard treatment plant, water passes through layers of graded sand and gravel. The sand acts as a physical barrier, trapping particles within the pores between grains. For more advanced purification, activated carbon is used.
4. Oil · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.6 MB
Oil pollution in oceans, particularly from oil leaks and spills caused by ships, is a major environmental threat. When oil is accidentally released into the sea, it spreads rapidly across the water surface, forming a layer that blocks sunlight and reduces oxygen exchange. This severely harms marine life, including fish, birds, and mammals. Marine mammals can ingest the toxic oil while grooming, and fish may suffer from long-term health issues due to exposure to hydrocarbons. Oil pollution also damages coastal habitats such as mangroves, coral reefs, and beaches.
Figure 33.3: (a) Eutrophication in water bodies damages aquatic life, (b) Marine life suffers from oil pollution (original drawing after the textbook's Figure 33.3)
5. Methane Emission by Decaying Organic Matter · Reviewed lesson · version 1 · published 16 Nov 2026
When sewage, agricultural runoff, or industrial waste enters water bodies, it boosts the growth of algae and other organisms. As these organisms die and decompose in oxygen-poor (anaerobic) conditions, methane, a potent greenhouse gas, is released. The excess methane contributes to climate change and worsens global warming.
Quick Check 33.5
a)Methylmercury ([CH₃Hg]⁺) is “highly fat-soluble,” allowing it to cross biological membranes and the blood-brain barrier.
5. Plastic and Solid Waste
5. Plastic and Solid Waste · Reviewed lesson · version 1 · published 16 Nov 2026
Plastic and solid waste pollution in oceans and other water bodies is a growing environmental crisis. Millions of tons of plastic waste including bottles, bags, fishing nets, and microplastics are dumped into rivers, lakes, and oceans every year. Unlike organic materials, plastics do not biodegrade; instead, they break down into smaller particles that persist in the environment for centuries.
Marine animals often mistake plastic for food, leading to ingestion, choking, or internal injury, which can be fatal. Sometimes entanglement in old fishing gear and other debris in the sea bed also causes injury or death to countless sea creatures, including turtles, dolphins, and birds. Furthermore, microplastics have entered the food chain, raising concerns about their impact on human health. Solid waste pollution also clogs waterways, disrupts aquatic habitats, and reduces water quality.
Quick Check 33.3
iv. Disinfection
iv. Disinfection · Reviewed lesson · version 1 · published 16 Nov 2026
Filtration alone cannot remove dissolved ions or microscopic pathogens; therefore, chemical purification is necessary. Chlorination is the most common method of disinfection. The other methods include sodium hypochlorite (NaOCl); ozone (O₃) or sometimes with hydrogen peroxide (H₂O₂). When chlorine gas or sodium hypochlorite is added to water, it forms hypochlorous acid (HOCl), which penetrates the cell walls of bacteria and viruses, disrupting their cell functions.
3. Eutrophication · Reviewed lesson · version 1 · published 16 Nov 2026
Nutrient pollution, also known as eutrophication, occurs when excessive amounts of nutrients, primarily nitrogen and phosphorus, enter into water bodies, usually from agricultural runoff, wastewater discharge, and stormwater. Although these nutrients are essential for plant growth, their excess in aquatic environments leads to the rapid growth of algae, commonly referred to as algal blooms. These blooms can block sunlight from reaching underwater plants. When they die and decompose, they consume large amounts of oxygen, creating hypoxic or “dead zones” where aquatic life cannot survive. Eutrophication severely disrupts aquatic ecosystems, reduces biodiversity, harms fisheries, and affects water quality for recreational and drinking purposes. High nitrate levels in drinking water are particularly dangerous for infants. It can lead to “Blue Baby Syndrome” (Methaemoglobinaemia), where nitrates reduce the blood's capacity to carry oxygen.
1. Destruction of Eco Systems and Biodiversity · Reviewed lesson · version 1 · published 16 Nov 2026
Water pollution, such as oil, heavy metals, and pesticides severely damages ecosystems and aquatic life by introducing harmful chemicals, plastics, and waste into rivers, lakes, and oceans. Polluted water reduces oxygen levels, causing hypoxia and making it difficult for aquatic life to survive. It damages coral reefs and disrupts food chains. Toxic chemicals, sewage, and industrial waste can kill or harm aquatic organisms, reducing the variety of life in rivers, lakes, and oceans. Polluted water disrupts breeding cycles, food sources, and migration patterns, leading to population decline and even extinction of sensitive species. It also affects birds and animals that rely on water bodies for survival.
33.6 Wastewater Treatment · Reviewed lesson · version 1 · published 16 Nov 2026
Depending on the type and severity of pollution, such as organic matter, chemicals, or pathogens, different water treatment methods are used. These techniques are used at different levels of water treatment, i.e., primary treatment (removal of physical debris), secondary treatment (biological processing), and tertiary treatment (chemical purification). In the following steps different technologies (physical, biological, and chemical) suitable to remove various contaminants in water are being provided
ii. Unique Solvent Abilities · Reviewed lesson · version 1 · published 16 Nov 2026
Polarity also makes water a good solvent for a wide range of ionic substances, such as metallic ions, nitrates (NO₃⁻) and phosphates (PO₄³⁻), by surrounding the ions. Furthermore, the ability of water to dissolve polar organic compounds means that many pesticides and herbicides easily enter the water cycle, where they can persist and undergo bioaccumulation.
1. Point Source Pollution · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
Point-source pollution is the contamination that enters a water body from a single, discrete, and identifiable location or point. Because the discharge is concentrated at one point, it often causes a pollution plume. Immediately downstream or at the site of discharge, concentrations of the pollutant (such as heavy metals or organic waste) are at their highest, leading to localized acute toxicity. An example is a factory discharging lead or mercury salts directly into a river via a specific wastewater pipe. Another example is a storage tank at a chemical plant leaking its contents into the soil and subsequently into the groundwater.
Figure 33.1: Urban Sewage polluting water channels (point source pollution) (original drawing after the textbook's Figure 33.1)
i. Thermal Stability · Reviewed lesson · version 1 · published 16 Nov 2026
The polarity of the water molecule results in the formation of hydrogen bonds between water molecules. Hydrogen bonding gives water a high specific heat capacity and high heat of vaporisation. This means that large bodies of water are thermally stable, resisting rapid temperature changes.
4. Deforestation and Land Use for Urban Development
4. Deforestation and Land Use for Urban Development · Reviewed lesson · version 1 · published 16 Nov 2026
Deforestation and land use significantly contribute to the water pollution. When trees and vegetation are removed, the soil becomes loose and more prone to erosion, leading to increased sediment in rivers and streams. This sediment can clog waterways, harm aquatic habitats, and reduce water quality. Urban development and construction activities often introduce pollutants and debris into runoff water.
33.2 Sources of Water Pollution · Reviewed lesson · version 1 · published 16 Nov 2026
The sources of pollution may either be small scale and single point or a variety of locations or points adding the same or various types of pollutions. Based on this, the sources of water pollution are divided into two types.
ii. Coagulation and Flocculation · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.1 MB
To speed up the settling of finer colloidal particles, coagulation and flocculation are employed. This process is done if required. It involves the precipitation of dissolved contaminants (e.g., heavy metals, phosphates) into insoluble forms for removal. Chemical coagulants, such as aluminium sulphate (Al₂(SO₄)₃), are added to the water. These chemicals cause the smaller particles to clump together into larger masses called “floc”, which are then easily removed.
Coagulation and flocculation: before, coagulant and flocculant (original drawing after the textbook's figure in step ii).
3. Domestic and Municipal Waste · Reviewed lesson · version 1 · published 16 Nov 2026
Domestic and municipal waste is one of the major sources of water pollution. In many areas, untreated or poorly treated sewage and solid waste from cities is discharged directly into rivers, lakes, or oceans, introducing harmful bacteria and viruses. Household waste such as detergents, oils, and chemicals often enter drains and eventually reach water bodies. Especially, plastics are frequently dumped in or near water channels, leading to blockages and long-term pollution.
2. Non-Point Source (NPS) Pollution · Reviewed lesson · version 1 · published 16 Nov 2026
Non-point source pollution, also known as diffused pollution, occurs when rainfall or snowmelt moves over and through the ground. As the water moves, it picks up and carries away natural and human-made pollutants, finally depositing them into lakes, rivers, wetlands, and coastal waters. Unlike point sources, NPS pollution is heavily dependent on weather events like heavy storms. It results in a mixture of various pollutants at lower concentrations across a much wider area. Some examples of non-point pollution sources are:
Rain washing excess ammonium nitrate (NH₄NO₃), fertilizers, and pesticides from thousands of hectares of farmland into a river system.
Stormwater moving over impermeable surfaces (roads and car parks), collecting leaked engine oils (hydrocarbons), zinc from tires, and road salts.
Quick Check 33.2
33.3 Common Water Pollutants
33.3 Common Water Pollutants · Reviewed lesson · version 1 · published 16 Nov 2026
1. Microbiological Pollutants
Microbiological pollution is the contamination of water by harmful microorganisms, such as bacteria, viruses, protozoa, and parasites which can pose serious health risks to humans and animals. This type of pollution typically results from the discharge of untreated or inadequately treated sewage, animal waste, hospital waste, and runoff from agricultural lands into water bodies. Common pathogens found in microbiologically polluted water include Escherichia coli, Salmonella, and Giardia. Microorganisms in water, such as bacteria, viruses, and protozoa are the major cause of water-borne diseases. Common water-borne diseases include cholera, typhoid, dysentery, and hepatitis A.
33.4 Water Pollution due to Human Activities · Reviewed lesson · version 1 · published 16 Nov 2026
Human activities are a major cause of water pollution across the globe. As populations grow and industries expand, more waste and pollutants are introduced into water bodies. Improper waste management and lack of environmental regulations often lead to contaminants reaching rivers, lakes, and oceans.
3. Bioaccumulation and Magnification · Reviewed lesson · version 1 · published 16 Nov 2026
Bioaccumulation and biomagnification are serious adverse effects of water pollution, where toxic substances like mercury, lead, and pesticides build up in organisms over time. These toxins accumulate in the bodies of aquatic animals and become more concentrated as they move up the food chain. Top predators, including humans, often receive the highest doses.
6. Marine Transport · Reviewed lesson · version 1 · published 16 Nov 2026
Marine transport activities contribute to water pollution through the discharge of oil, fuel, and other chemicals from ships and boats. Accidental oil spills, wastewater and sewage from vessels, and ships are major causes of pollution. Routine maintenance, such as hull cleaning and painting, can also release toxic substances into the water. These practices collectively harm aquatic life and reduce water quality.
Quick Check 33.4
a)A river passes by three regions in a country: a rural area with vast agricultural land and a lot of cattle; an industrial area with many paint and battery industries; and a large residential area of a big city:
33.7.2 Efficient Use of Water
33.7.2 Efficient Use of Water · Reviewed lesson · version 1 · published 16 Nov 2026
Conservation of water is of utmost importance in the current era due to water shortage faced by a large population fraction of the world. Following strategies help conserve water.
Water-saving technologies in agriculture such as, drip irrigation and sprinkler irrigation in agriculture significantly reduced water wastage while improving crop yield and efficiency.
Reusing and recycling greywater, such as household laundry, dishwashing, and bathing water for landscaping, toilet flushing, and industrial cooling helps conserve freshwater resources and reduces the burden on sewage treatment systems.
Implementing rainwater harvesting systems in both urban and rural areas is a sustainable method to capture and store valuable water resources.
Regular repair and maintenance of water supply infrastructure minimize leaks and water loss, ensuring efficient delivery and reduced resource wastage.
Constructing small dams and recharge wells helps store rainwater and replenish groundwater levels, providing a reliable source of water during dry periods.
Community engagement and awareness through public education campaigns on water-saving behaviours and involvement of local communities in water body protection.
Health effects of Heavy Metals
Heavy metals have high atomic weights and densities. Due to their non-biodegradable nature, they tend to accumulate in the tissues of living organisms, and are particularly dangerous. Some common heavy metals and their hazards are given in the following lines.
Cd2+ ions have higher charge density so they can replace Ca2+ ions in bones (original drawing after the textbook's illustration).
Methyl mercury ([CH₃Hg]⁺) is highly fat-soluble, allowing it to easily cross biological membranes and undergo biomagnification. It is a potent neurotoxin that crosses the blood-brain barrier. Long term exposure leads to Minamata disease, characterized by ataxia, numbness in the hands and feet, and general muscle weakness.
Lead interferes with the production of haemoglobin, leading to anaemia. In children, it acts as a cumulative poison that causes irreversible neurological damage and developmental delays.
Long-term ingestion of cadmium (Cd) leads to “Itai-itai” disease, where cadmium replaces calcium in the bones, making them extremely brittle. It also causes severe kidney damage (nephrotoxicity).
The limiting concentrations (mg/L) of some heavy metals are provided in Table 33.2.
Table 33.2 WHO permissible limits of heavy metals in drinking water
Heavy Metal
WHO Limit (mg/L)
Arsenic (As)
0.01
Chromium (Cr)
0.05
Copper (Cu)
2.0
Lead (Pb)
0.01
Cadmium (Cd)
0.003
Mercury (Hg)
0.006
swipe
The picture of a patient inflicted by such a neurological disease (original drawing after the photograph printed in the Did You Know box)
a) Pesticides and Herbicides
Pesticides and Herbicides such as DDT and Glyphosate are another hazardous material that pollute water and cause severe human health issues. The major sources of these are agricultural runoff and domestic gardening. They are non-polar and insoluble in water but highly soluble in the fatty tissues of fish and birds. Many older pesticides like DDT are persistent organic pollutants (POPs). Pesticides are linked to hormonal disruption and developmental problems. Chemical pollution also degrades water quality, reduces biodiversity, and disrupts aquatic ecosystems.
Health Effects
Many pesticides act as endocrine disruptors like natural hormones, e.g., estrogen. This can lead to the reproductive failure in wildlife (e.g., thinning of eggshells in birds) and is linked to hormonal cancers in humans. Polychlorinated biphenols (PCBs) have been used in electrical transformers as coolants; they leak into water from hazardous waste sites. PCBs are classified as probable human carcinogens. They also suppress the immune system and cause skin conditions, such as chloracne.
Figure 33.2: Effects of heavy metals and pesticides on the human body (original drawing after the textbook's Figure 33.2).