Electromagnetic radiation interacts with matter in characteristic ways. The unit introduces IHD from molecular formulae, atomic emission/absorption spectra, UV-visible electronic transitions and conjugation, IR vibrational absorption for functional-group identification, and mass spectrometry for isotopic abundance, relative atomic mass, molecular ion, fragmentation and M+1/M+2 peaks.
6 MCQs · 3 long questions · 4 short questions · 2 constructed-response
The chapter's topics and page numbers follow the official textbook. Lessons, lectures and practice are added after academic review.
Lessons
29.5.1 Interpreting and Predicting Infrared Spectra
29.5.1 Interpreting and Predicting Infrared Spectra · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.4 MB
The best way to understand how to interpret an IR spectrum is by looking at solved examples and becoming familiar with the characteristic features of an IR spectrum.
Example 29.1
Examine the two spectra shown and determine which one belongs to propan-2-ol and which one belongs to propanone.
Answer
The presence of a strong, sharp absorption around 1710 cm⁻¹ corresponds to the characteristic C=O, carbonyl, the functional group in a ketone. IR spectrum A is propanone.
In spectrum B the presence of a strong, absorption around 3200−3600 cm⁻¹ suggests that there is an alcohol group present, which corresponds to the -OH group in propan-2-ol.
Example 29.1: infrared spectra A and B (original drawing after the spectra printed with Example 29.1).
29.5.2 IR Spectra of Important Functional Groups · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 1.4 MB
IR spectrum of 2-butanol (original drawing after the spectrum printed in 29.5.2).
The OH group of the alcohol shows a strong absorption at 3600-3200 cm⁻¹. The peak at 3000 cm⁻¹ is due to sp³ hybridized C−H bonds.
The N−H bond in an amine gives rise to two weak absorptions at 3300 and 3400 cm⁻¹.
IR spectrum of octylamine (original drawing after the spectrum printed in 29.5.2).
An amide exhibits absorptions above 1500 cm⁻¹ for both its N−H and C=O groups: N−H (two peaks) at 3200 and 3400 cm⁻¹; C=O at 1660 cm⁻¹.
IR spectrum of propanamide (original drawing after the spectrum printed in 29.5.2).
Importance of IHD
Importance of IHD · Reviewed lesson · version 1 · published 16 Nov 2026
Knowing the IHD of a molecule gives clues about its composition and structure. For example, if the IHD is 0, it is certain that the chemical has no rings and no double bonds. This is very helpful because you can find this number easily just by looking at the chemical formula.
If the IHD is 1, the chemical must have either one ring or one double bond, but it cannot have both. If the IHD is 2, there are a few choices: it could have two rings, two double bonds, one of each, or one triple bond. Thus, IHD can give us very useful information about a chemical without using complex analytical techniques. Also, before using an analytical technique IHD will help to assess which technique would be better for the compound under study. The IHD for hydrocarbons can be calculated using the data given in Table 29.1.
Table 29.1 Index of hydrogen deficiency
Formula
Index of Hydrogen Deficiency (IHD)
Structure Unit Involved
29.2 Atomic Spectrum
29.2 Atomic Spectrum · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
Figure 29.2: Hydrogen emission spectrum (original drawing after the textbook's Figure 29.2).
Atomic spectra are observed when atoms emit or absorb light of a certain wavelength, known as emission spectra and absorption spectra respectively. Atomic spectra provide evidence that electrons in atoms can only transition between discrete atomic energy levels. When energy is absorbed by electrons of an atom, electrons move from lower energy levels to higher energy levels. These excited electrons radiate energy to return from the excited state to ground states and form emission spectra.
Emission spectra can be produced by heating a low-pressure gas. Heating provides energy to excite electrons to higher energy levels.
When an electron transitions back to a lower energy level, it emits a photon. Each transition corresponds to a specific wavelength of light which appears as an observable spectral line. The resulting emission spectrum contains a set of distinct wavelengths, represented by coloured lines on a black background.
29.6 Mass Spectrometry
29.6 Mass Spectrometry · Reviewed lesson · version 1 · published 16 Nov 2026
Mass spectrometry is an analytical technique used to identify unknown compounds. The molecules/atoms in the small sample are bombarded with high energy electrons which can cause a molecule/atom to lose an electron. As a result, a positive ion is formed which is detected by detector and recorded as m/e (mass to charge ratio of the ion) versus percentage of ion.
29.1 Index of Hydrogen Deficiency (IHD) · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 26 KB
Consider the given compounds shown here.
1-Hexene and cyclohexane (original drawing after the structures printed at the start of 29.1).
These compounds have the same molecular formula but different structures, i.e. these are two isomers. However, there is one more similarity between these two compounds. Both these have two hydrogens less than a saturated alkane. It means they have a deficiency of two hydrogen atoms. The deficiency of hydrogen corresponds to the degree of unsaturation of a compound. The index of hydrogen deficiency (IHD) is a measure of the degrees of unsaturation in a compound. A compound is said to have one degree of unsaturation for every two hydrogen atoms that are missing.
This is why the above two compounds have an IHD equal to 1. The degree of unsaturation (U), or index of hydrogen deficiency (IHD), is defined as the difference in the number of pairs of hydrogen atoms between the compound and the acyclic alkane with the same number of carbon atoms. Each double bond or ring costs two hydrogen atoms compared to a saturated analog and results in one degree of unsaturation. For example, if a compound has the molecular formula C₄H₆, it has four hydrogen atoms less than the saturated, compound C₄H₁₀. Therefore, this compound has two degrees of unsaturation (IHD=2).
29.3 Spectroscopy · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Spectroscopy deals with the production, measurement, and interpretation of spectra arising from the interaction of electromagnetic radiation with matter. A spectrum can be used to obtain information about atomic and molecular energy levels, molecular geometries, interactions of molecules and the nature of chemical bonds. A spectroscopic measurement can also be used for measuring the amount of a specific substance in a sample (quantitative analysis) or even just to identify an unknown sample (qualitative analysis).
The chemical composition of a substance can be investigated using emission and absorption spectra. Each element produces a unique pattern of spectral lines. No two elements produce the same set of spectral lines, therefore, elements can be identified by their atomic spectra. Emission line spectra are unique to each element, like a fingerprint.
Star spectrum (original drawing after the picture printed in the textbook)
29.5 Infrared Spectroscopy
29.5 Infrared Spectroscopy · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 78 KB
All covalent bonds act rather like springs, the bonds can vibrate in a number of different ways. The frequencies of vibrations occur in the infra-red region of the electromagnetic spectrum. If an organic molecule is irradiated with the infra-red energy that matches the natural vibration frequency of its bonds, it absorbs some of that energy and the amplitude of vibration increases.
Figure 29.6: Different modes of vibration in molecules (original drawing after the textbook's Figure 29.6).
Infrared (IR) spectroscopy is a technique used to identify compounds which is based on changes in vibrations of atoms when they absorb IR of specific frequencies. A spectrophotometer irradiates the sample with IR radiation and then detects the absorption of radiation by the molecule. IR energy is absorbed only if a molecule has a permanent dipole that changes as it vibrates. Symmetrical and nonpolar molecules such as O₂ or H₂, are, therefore, IR inactive. Polar bonds such as O-H, N-H, etc. show absorption at higher wavenumbers. Similarly, bonds with smaller bond length and those with multiple bonds (e.g., HC≡CH also absorb at higher wavenumbers. The reason for these observations is that these bonds are stronger and require higher energy. An IR spectrum consists of two regions. The fingerprint region below 1500 cm⁻¹ and the functional group region above 1500 cm⁻¹. Only functional region is discussed here which is enough to interpret the nature of organic compound.
29.4 UV/Visible Spectroscopy
29.4 UV/Visible Spectroscopy · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.2 MB
Ultraviolet-visible (UV-Vis) spectroscopy is one of the most popular analytical techniques because it is very versatile and easy to use. In UV-Vis spectroscopy, the UV-Vis light is passed through a sample and the transmittance of light is measured. The absorbance (A) can be determined from the transmittance (T) using the formula A = −log (T). A UV-Vis spectrum displays the absorbance of a substance at various wavelengths. The amount of absorbance at any wavelength is due to the electronic structure of the molecule.
Types of electrons in a compound can be:
σ electrons (σ-bonds)
π electrons (in unsaturated compounds only)
n electrons (non-bonded electrons)
Sigma bonding orbitals are lower in energy than π bonding orbitals, which in turn, are lower in energy than non-bonding orbitals. When electromagnetic radiation of the correct frequency is absorbed, a transition occurs from one of these orbitals (π or n) to an empty orbital, usually an antibonding orbital, σ* or π*. UV-Vis spectroscopy uses the wavelengths from 200-800 nm to study the changes in electronic energy levels. These changes are due to the transfer of electrons from π- or non-bonding orbitals as shown in Figure 29.4.
Figure 29.4: Transition of electrons from lower energy to higher energy levels (original drawing after the textbook's Figure 29.4).
29.6.2 Molecular Ion Peak and Fragmentation
29.6.2 Molecular Ion Peak and Fragmentation · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.4 MB
When molecules in a sample compound are bombarded with highly accelerated electrons it causes the molecules to lose electrons. This results in the formation of a positively charged molecular ion with one unpaired electron. One of the electrons in the pair has been removed by the beam of electrons.
Introduction · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 0.3 MB
Light and other forms of electromagnetic radiation travel in the form of waves, which consist of oscillating electric and magnetic fields. These waves are defined by their wavelength
29.6.1 Isotopic Mass and Abundance
29.6.1 Isotopic Mass and Abundance · Reviewed lesson · version 1 · published 16 Nov 2026
Images and handouts: 82 KB
Mass spectrum of boron (original drawing after the spectrum printed in 29.6.1).
Mass spectrometry can be used to find the relative abundance of the isotopes experimentally. The relative abundance is the proportion of a particular isotope in a mixture of isotopes found in nature. For example, the relative abundance of Cl-35 and Cl-37 is 75% and 25% respectively. The heights of the peaks in mass spectroscopy show the proportion of each isotope present. For example, in the graph below, the peak heights show the relative abundance of the boron isotopes: boron-10 has a relative abundance of 19.9% and boron-11 has a relative abundance of 80.1%.
Calculating Relative Atomic Mass
The mass of an element is given as relative atomic mass, Aᵣ by using the average mass of the isotopes. The relative atomic mass of an element can be calculated by using the relative abundance and isotopic masses. The relative abundance of an isotope is either given or can be read the mass spectrum.
Relative Atomic Mass (Ar)=100Σ(isotopic mass×isotopic abundance)
swipeRelative Atomic Mass (Aᵣ) = Σ (isotopic mass × isotopic abundance) / 100
IR spectrum of a carboxylic acid (original drawing after the spectrum printed in 29.5.2).
The C=O group in the carboxylic acids shows a strong absorption at 1700 cm⁻¹ along with broad and deep absorption of the O-H bond of a carboxylic acid between 2500 and 3300 cm⁻¹. The broad peak caused by the O-H bond of a carboxylic acid between 2500 and 3300 cm⁻¹. This right hand side of this peak is often distorted by the peaks from C-H bonds.
Quick Check 29.2
Quick Check 29.2 (IR): infrared spectra A and B (the book prints the spectra of Example 29.1 again here; original drawing).
Quick Check 29.2 (IR): IR spectra for compounds T and U (original drawing after the spectra printed in the Quick Check).
Figure 29.3: Hydrogen absorption spectrum (original drawing after the textbook's Figure 29.3).
On the other hand, an absorption spectrum contains the frequencies of light transmitted in the form of dark bands when energy is absorbed by the electrons in the ground state to reach higher energy states. Absorption spectra can be produced by passing white light through a cool, low-pressure gas. Only photons with the exact energy required to excite electrons will be absorbed. Each absorbed photon corresponds to a specific wavelength of light which appears as a dark line on a coloured background. These lines correspond to the same lines observed on an emission spectrum for the same element. An absorption spectrum is like a photographic negative of an emission spectrum.
For example, hydrogen is known to produce strong spectral lines in the red portion of the visible spectrum, at 656 nm. When sodium is burned, a characteristic yellow flame is observed due to the strong spectral lines in the yellow portion of the spectrum, at 589 nm. When mercury is burned, most of the emission lines are below 450 nm, which produce a characteristic blue light.
In each possible case, an electron is excited from a filled orbital into an empty anti-bonding orbital. Each jump takes energy from the light of a specific wavelength will be absorbed.
The important electronic transitions are:
from pi bonding orbitals to pi anti-bonding orbitals (π to π*)
from non-bonding orbitals to pi anti-bonding orbitals (n to π*)
from non-bonding orbitals to sigma anti-bonding orbitals (n to σ*)
Figure 29.5: Absorption spectrum of buta-1,3-diene (original drawing after the textbook's Figure 29.5).
The diagram below shows a simple UV-visible absorption spectrum for buta-1,3-diene, CH₂=CH-CH=CH₂. Absorption peaks at a value of 217 nm corresponds to the wavelength absorbed maximum and is called λₘₐₓ. This is in the UV region and so there would be no visible sign of any light being absorbed the compound is colourless. There are no non-bonding electrons so the only electron jumps taking place (within the range that the spectrometer can measure) are from pi bonding to pi anti-bonding orbitals.
The value of λₘₐₓ for a particular compound is highly dependent on the extent of conjugation. To illustrate this point, compare the MOs of butadiene, hexatriene, and octatetraene.
Butadiene, hexatriene and octatetraene with their lambda max values (original drawing after the structures printed in 29.4).
In a conjugated system, atoms share electrons across a long chain. The more "conjugated" a compound is, the more energy levels it has, and the gaps between those levels become smaller. Because these gaps are smaller, it takes less energy to push an electron from a low level to a higher one. Since the energy of light depends on its frequency, these smaller energy gaps allow the compound to absorb light with less energy (lower frequency), which is why highly conjugated compounds often have bright colours. Because longer light waves have less energy, these chemicals absorb light with a longer wavelength, called the λₘₐₓ. This means that the more double bonds a compound has connected together, the higher its λₘₐₓ number will be. Usually, every time you add one more double bond to the chain, that number increases by about 30 to 40 nm. By looking at this number, the extent of conjugation in a compound can be determined.
Quick Check 29.2
Quick Check 29.2 b): structures i), ii) and iii) (original drawing after the structures printed in the Quick Check)
Molecule⁺• represents the molecular ion. The molecular ion can further fragment to form new ions, molecules, and free radicals.
a) Deducing Molecular Formula
Each peak in the mass spectrum corresponds to a certain fragment with a particular m/e value. The peak mostly with the highest m/e value is the molecular ion (M⁺) peak which gives information about the molecular mass of the compound. The molecular ion is the entire molecule that has lost one electron when bombarded with a beam of electrons.
The [M+1] peak is a smaller peak which is due to the natural abundance of the isotope carbon-13. The height of the [M+1] peak for a particular ion depends on how many carbon atoms are present in that molecule; the more carbon atoms, the larger the [M+1] peak is. For example, the height of the [M+1] peak for hexane (containing six carbon atoms) ion will be greater than the height of the [M+1] peak of ethane (containing two carbon atoms) ion.
Example 29.4
Determine whether the following mass spectrum corresponds to propanal, CH₃CH₂CHO or butanal, CH₃CH₂CH₂CHO.
Answer: The mass spectrum corresponds to propanal as the molecular ion peak is at m/e = 58. The molecular ion mass of CH₃CH₂CHO⁺ ion is 58 and butanal arises from the CH₃CH₂CH₂CHO⁺ ion which has a m/e of 72.
Example 29.4: mass spectrum (original drawing after the spectrum printed with Example 29.4).
b) Identifying Molecules Using Fragmentation
The molecular ion peak can be used to identify a compound by its molecular mass. However, different compounds may have the same molecular mass. To further determine the structure of the unknown compound, fragmentation is used. Fragments may appear due to the formation of characteristic smaller ions or the loss of small molecules. For example, loss of small molecules/fragments give rise to peaks at 18 (H₂O), 29 (C₂H₅⁺), and 44 (CO₂).
Alkanes
Simple alkanes are fragmented in mass spectroscopy by breaking the C-C bonds. m/e values of some of the common alkane fragments are given in the Table 29.3.
Table 29.3 Common fragments of hexane
Fragment
m/e
CH₃⁺
15
C₂H₅⁺
29
C₃H₇⁺
43
C₄H₉⁺
57
C₅H₁₁⁺
71
C₆H₁₃⁺
85
swipe
The fragmentation of the straight chain hexane: 86, 71, 57, 43, 29 and 15, which is due to the fragment at different location.
CH₃–CH₂–CH₂–CH₂–CH₂–CH₃ (Mass:86)
CH₃–CH₂–CH₂–CH₂–CH₂⁺ (Mass:71)
CH₃–CH₂–CH₂–CH₂⁺ (Mass:57)
CH₃–CH₂–CH₂⁺ (Mass:43)
CH₃–CH₂⁺ (Mass:29)
CH₃⁺ (Mass:15)
c) The M+1 & M+2 Peaks
i. Determine the Number of Carbon Atoms Using M+1 Peak
The [M+1] peak is caused by the presence of the carbon-13 (¹³C) isotope in the molecule. Carbon-13 makes up approximately 1.1% of all carbon atoms. Therefore, the [M+1] peak is much smaller than the M peak as the isotope is less common. The ratio of ¹³C to ¹²C is approximately 1:99. Thus, the greater the number of carbon atoms present in a molecule the greater the height of the [M+1] peak.
The number of carbon atoms, n, in a compound can be deduced using the [M+1] peak and the following formula:
n=1.1×abundance of M+ ion100×abundance of [M+1]
swipen = (100 × abundance of [M+1]) / (1.1 × abundance of M⁺ ion)
Example 29.5
Determine the number of carbon atoms of compound X with the following mass spectrum:
Answer
The M ion peak is at m/e 58 with a relative abundance of around 85.
The [M+1] peak is at m/e 59 with a relative abundance of 3.
Therefore, the number of carbon atoms (n) is:
n = (100 × 3) / (1.1 × 85) = 3.21
There are, therefore, 3 carbon atoms present in compound X.
Example 29.5: mass spectrum of compound X (original drawing after the spectrum printed with Example 29.5).
ii. Detecting Bromine and Chlorine Atoms Using M+2 Peak
The presence of bromine or chlorine atoms in a compound gives rise to a [M+2] and possibly [M+4] peak
Chlorine
Chlorine exists as two isotopes, ³⁵Cl and ³⁷Cl.
A compound containing one chlorine atom will, therefore, have two molecular ion peaks due to the two different isotopes, it contain,
³⁵Cl = M⁺ peak
³⁷Cl = [M+2] peak
The ratio of the peak heights is 3:1 (as the relative abundance of ³⁵Cl is 3× greater than that of ³⁷Cl.
A compound containing two chlorine atoms will have three molecular ion peaks due to the different combinations of chlorine isotopes they can contain
³⁵Cl + ³⁵Cl = M⁺ peak
³⁵Cl + ³⁷Cl = [M+2] peak
³⁷Cl + ³⁷Cl = [M+4] peak
The ratio of the peak heights is 9:6:1
Bromine
Bromine also exists as two isotopes, ⁷⁹Br and ⁸¹Br.
A compound containing one bromine atom will have two molecular ion peaks
⁷⁹Br = M⁺ peak
⁸¹Br = [M+2] peak
The ratio of the peak heights is 1:1 (they are of similar heights as their relative abundance is the same).
A compound containing two bromine atoms will have three molecular ion peaks.
⁷⁹Br + ⁷⁹Br = M peak
⁷⁹Br + ⁸¹Br = [M+2] peak
⁸¹Br + ⁸¹Br = [M+4] peak
The ratio of the peak heights is 1:2:1
M+, [M + 2] and [M + 4] peaks of compounds containing chlorine and bromine atoms (original drawing after the four spectra printed in 29.6.2).
Quick Check 29.3
Quick Check 29.3: mass spectrum of CH3Br (original drawing after the spectrum printed in the Quick Check).
where λ is the wavelength (in meters), ν is the frequency (in Hertz or s⁻¹), and c is the speed of light (in ms⁻¹).
The electromagnetic spectrum comprises of different radiations, including radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays.
Figure 29.1: Electromagnetic spectrum showing wavelength, frequency, energy, and the visible light region (original drawing after the textbook's Figure 29.1).
According to Planck's quantum theory
Only discrete amounts of energy may be emitted or absorbed by various atoms and molecules. Quantum energy is the smallest quantity of electromagnetic radiation that can be released or absorbed.
The frequency of a radiation and the energy it carries are directly proportional to each other.