28.4 Gas Chromatography
Chromatography
Gas chromatography (GC) is used to separate gases, volatile liquids and solids (in gaseous form). In GC, the stationary phase is a non-volatile, long chain, non-polar hydrocarbon liquid having high boiling point bonded to small particles of silica (SiO₂) or alumina (Al₂O₃). In GC, the mobile phase is an inert gas (carrier gas) such as helium or nitrogen. The sample is injected into injector port, where sample is quickly vapourised by an oven. The carrier gas carries the vapours of the sample through a long-coiled column packed with tiny silica particles having large surface area over which separation occurs.
The non-polar substances in the mixture have greater interaction with non-polar liquid on the solid particles of stationary phase. Therefore, these non-polar substances are carried through the column more slowly. Thus, substances that interact more strongly move slower while other move faster, resulting in separation. As the separated substances exit the column, they pass through a detector which identify and record them as peaks on a graph called a chromatogram. Detector also records retention time of each component. The time taken by a substance to pass through the column is retention time.
Gas chromatography has high sensitivity, good resolution, fast analysis and accurate quantification. Mixture of gases can easily be separated by GC at room temperature. GC is also a quantitative technique. The peaks obtained are first identified and then area of each peak is measured which will give the proportion of each component in the mixture. The peaks are similar to triangles, therefore, the area of peak can be calculated by the following formula.